REVISIONS NO. DESCRIPTION Was -B (Typo) 1 0.30 ±0.05 DATE BY 11/5/96 SDC 2.0 • See Note 6 Ø1.5 +0.1/-0.0 • See Note 1 1.75 A 4.0 R.5 (2) 7.5 • Note 6 1.6 (2) Bo 5.0 16.0 ±0.3 K1 6.4 (2) Ko A Ao 12.0 SECTION A-A R1.0 Typical Ø1.5 MIN Notes: 1. 10 sprocket hole pitch cumulative tolerance ± 0.2 2. Camber not to exceed 1mm in 100mm 3. Material: Black Conductive Advantek Polystyrene 4. Ao and Bo measured on a plane 0.3mm above the bottom of the pocket 5. Ko measured from a plane on the inside bottom of the pocket to the top surface of the carrier. 6. Pocket position relative to sprocket hole measured as true position of pocket, not pocket hole. Ao = Bo = Ko = K1 = 9.3 mm 9.3 mm 1.8 mm 1.2 mm - All Dimensions in Millimeters TOLERANCES Advantek1 Part Number Q07X07-C QFP Carrier Tape (EXCEPT AS NOTED) DECIMAL ± 0.1 FRACTIONAL DRAWN BY A SCALE ± ANGULAR REFERENCE NO. MATERIAL 3:1 RJB/SDC DATE see Note 3 DRAWING NO. REV 9/27/96 A1030-96-1 ± 1 1