REVISIONS NO. 1 4.0 •See Note 1 2.0 •See Note 6 DESCRIPTION DATE 1.25 was 1.2 BY 10/11/99 BTH Ø1.5 +0.1/-0.0 Ø1.5 MIN 1.75 0.30 ±0.05 A R0.3 MAX 7.5 •See Note 6 0.6 7.4 3.3 Bo 16.0 ±0.3 0.3 1.8 Ko R0.25 TYP 1.5 4.6 K1 0.3 Ao A 8.0 Section A-A Notes: 1. 10 sprocket hole pitch cumulative tolerance ±.02. 2. Camber not to exceed 1mm in 100mm. 3. Material: PS + C. 4. Ao and Bo measured on a plane 0.3mm above the bottom of the pocket 5. Ko measured from a plane on the inside bottom of the pocket to the top surface of the carrier. 6. Pocket position relative to sprocket hole measured as true position of pocket, not pocket hole. 15° 1 Ao = 6.8 mm Bo = 6.9 mm Ko = 1.6 mm K1 = 1.25 mm -All Dimensions in MillimetersAdvantek Part Number TSSP20-C Carrier Tape, Atmel Tool TOLERANCES (EXCEPT AS NOTED) a DECIMAL ± 0.1 FRACTIONAL DRAWN BY BTH SCALE 3:1 MATERIAL See Note 3 ± REFERENCE NO. ANGULAR ± T-8966 DATE DRAWING NO. 8/12/99 T102442AT 1 REV