REVISIONS NO. 1 2.0 1.5 +0.1/-0.0 DIA • Note 6 2 3 DATE Added A1 Removed extra double wall lines from pocket. Ramps Stretch-Formed BY 1/3/92 RJB 1/15/92 RJB 1/29/92 CKS TSOP32-C Was called TSOP32-A by mistake. 4.0 • See Note 1 DESCRIPTION 1.75 14.2 16.0 Bo 28.4 • Note 6 A A 32.0 ± 0.3 0.75 R 0.30 ± 0.05 16.0 Ao 2.00 MIN 1 A1 25.0 ° 1.28 5 0.20 ± 0.05 Ko Section A-A (Ref. only) Not Critical Notes: 1. 10 sprocket hole pitch cumulative tolerance 2. Camber not to exceed 1mm in 100mm 3. Material: Black Conductive Advantek Polystyrene 4. Ao and Bo measured on a plane 0.3mm above the bottom of the pocket 5. Ko measured from a plane on the inside bottom of the pocket to the top surface of the carrier. 6. Pocket position relative to sprocket hole measured as true position of pocket, not pocket hole. ± 0.2 - All Dimensions in Millimeters 1 Ao = 8.6 A 1 = 10.9 Bo = 20.6 Ko = 2.1 (EXCEPT AS NOTED) A DECIMAL ± 0.1 FRACTIONAL SCALE DRAWN BY CHK'D DATE TRACED APP'D see Note 3 DRAWING NO. 12/10/91 ANGULAR ± MATERIAL 2:1 CKS ± 3 Advantek Part Number TSOP32-C TSOP32 Carrier Tape TOLERANCES A1210-91-2 3