REVISIONS 2.0 • See Note 6 B B P/N Was TSSOP24-A BY 9/9/93 T.S. 1.75 7.5 • Note 6 2.0 1.60 B1 1 DATE 1.5 +0.1/-0.0 DIA A 0.3 R MAX. DESCRIPTION 4.0 • See Note 1 0.30 ± 0.05 NO. Bo 16.0 ± 0.3 Ao SECTION A-A 8.0 1.0 R A 1.37 3.4 K1 1.5 MIN SECTION B-B Notes: 1. 10 sprocket hole pitch cumulative tolerance ± 0.2 2. Camber not to exceed 1mm in 100mm 3. Material: Black Conductive Advantek Polystyrene 4. Ao and Bo measured on a plane 0.3mm above the bottom of the pocket 5. Ko measured from a plane on the inside bottom of the pocket to the top surface of the carrier. 6. Pocket position relative to sprocket hole measured as true position of pocket, not pocket hole. 0.3 R TYPICAL Ko 45 ° - All Dimensions in Millimeters TOLERANCES Ao = 6.95 Bo = 8.30 B 1 = 9.00 Ko = 1.60 K 1 = 1.20 Advantek Part Number TSSP24-A TSSOP-24 Carrier Tape, Open Tool (EXCEPT AS NOTED) A DECIMAL ± 0.1 FRACTIONAL SCALE DRAWN BY ± CHK'D DATE TRACED APP'D see Note 3 DRAWING NO. 8/2/93 ANGULAR ± MATERIAL 3:1 RJB A0819-93-3 1