4.0 ± 0.1 t 0.3 R MAX. • See Note 1 1.75 ± 0.1 2.0 ± 0.1 1.5+0.1/-0.0 DIA. A SEE NOTE 6 7.5 ±0.1 SEE NOTE 6 Bo 16.0 ± 0.3 0.5 RADIUS TYPICAL Ko 1.5 MIN A 12.0 ±0.1 Ao SECTION A-A 1 Ao = 10.3 mm Bo = 10.3 mm Ko = 4.9 mm ± 0.1 ± 0.1 ± 0.1 Notes: 1. 10 sprocket hole pitch cumulative tolerance ± 0.2 2. Camber not to exceed 1mm in 100mm 3. Material: Conductive Black Advantek Polystyrene 4. Ao and Bo measured on a plane 0.3mm above the bottom of the pocket 5. Ko measured from a plane on the inside bottom of the pocket to the top surface of the carrier. 6. Pocket position relative to sprocket hole measured as true position of pocket, not pocket hole. Part# PLCC20-AC 0.30 t ± 0.05 PLCC20-AX 0.35 ± 0.05 - All Dimensions in Millimeters REVISIONS TOLERANCES (EXCEPT AS NOTED) DECIMAL ± NO. 1 2 DESCRIPTION Added CHART Pocket Hole was 1.6+1.0/-0.1 DIA. FRACTIONAL 3 DATE Advantek Part Number PLCC20-A PLCC-20 Carrier Tape BY 12/13/91 CKS 3/2/94 T.S. DRAWN BY A BJD SCALE ± CHK'D DATE TRACED APP'D 4 ± see Note3 DRAWING NO. 12/28/88 ANGULAR 5 MATERIAL 1 inch = 10mm A0103-89-1 2