REVISIONS NO. 4.0 •See Note 1 DESCRIPTION DATE BY 0.25 2.0 •See Note 6 R0.25 Ø1.5 MIN Ø1.5 +0.1/-0.0 1.75 0.30 ± 0.05 A R0.3 MAX 7.5 •See Note 6 Bo 16.0 ± 0.3 Ko A Ao 12.0 Section A-A Notes: 1. 10 sprocket hole pitch cumulative tolerance ± 02. 2. Camber not to exceed 1mm in 100mm. 3. Material: PS + C. 4. Ao and Bo measured as indicated. 5. Ko measured from a plane on the inside bottom of the pocket to the top surface of the carrier. 6. Pocket position relative to sprocket hole measured as true position of pocket, not pocket hole. Ao = 7.25 mm Bo = 7.25 mm Ko = 1.1 mm -All Dimensions in MillimetersAdvantek Part Number ML0707-A Carrier Tape TOLERANCES (EXCEPT AS NOTED) DECIMAL ± 0.1 FRACTIONAL ± ANGULAR ± DRAWN BY TMO REFERENCE NO. T-9206 SCALE DATE 3:1 10/08/99 MATERIAL See Note 3 DRAWING NO. T102533AT REV