FF-1069A-3B The FF-1069A-3B was originally developed to use with units such as the solid state florescent ballasts. The filter will also work with other solid state controllers where compliance to FCC requirements is a requirement. JMK also has a 6 amp and a 10 amp model available in this series. This filter is also available with 0.25 inch tab terminals. Agency approvals: Oder P/N: CSA FF-1069A-3B Operating Voltage: __________________ 125 / 250 Vac Operating Current: _______________________ 3 Amps Operating Frequency: ____________________50/60 Hz Operating Temperature: ________________ -20 to 50ºC INSERTION LOSS vs. FREQUENCY Diel. Withstanding (line-case): _________ 1500 V; 1 Min Diel. Withstanding (line– line): ________1500 Vdc; 1 Min Leakage Current: ________1.2 mA Max @ 250 V /50 Hz Max Residual Voltage after 1 sec: __________32 V Max Calculated MTBF: ________21,985,270 Hrs @ 30°C GB USA JMK Inc 15 Caldwell Dr. Amherst, NH 03031 PH: 603 886-4100 FX: 603 886-4115 email: [email protected] PH: 44-(0) 7785310729 Fax: 44-(0) 141 589 1884 EUR JMK Inc Glasgow G13 1DN Scotland UK