SFH6741, SFH6742, SFH6750, SFH6752 Vishay Semiconductors High Speed Optocoupler, Single and Dual, 10 MBd FEATURES Single Channel NC 1 • Choice of CMR performance of 10 kV/μs, 5 kV/μs, and 100 V/μs • High speed: 10 MBd typical • + 5 V CMOS compatibility • Pure tin leads • Guaranteed AC and DC performance over temperature: - 40 °C to + 100 °C temperature range • Meets IEC 60068-2-42 (SO2) and IEC 60068-2-43 (H2S) requirements • Low input current capability: 5 mA • Compliant to RoHS Directive to 2002/95/EC and in accordance WEEE 2002/96/EC 8 V CC A 2 7 V E C 3 6 V O NC 4 5 GND SFH6741, SFH6742 Dual Channel A1 1 8 VCC C1 2 7 VO1 C2 3 6 VO2 A2 4 5 GND APPLICATIONS SFH6750, SFH6752 • • • • 18921-15 DESCRIPTION The SFH674x and SFH675x are single channel 10 MBd optocouplers utilizing a high efficient input LED coupled with an integrated optical photodiode IC detector. The detector has an open drain NMOS-transistor output, providing less leakage compared to an open collector Schottky clamped transistor output. For the single channel type, an enable function on pin 7 allows the detector to be strobed. The internal shield provides a guaranteed common mode transient immunity of 5 kV/μs for the SFH6741 and 10 kV/μs for the SFH6742 and SFH6752. Microprocessor system interface PLC, ATE input/output isolation Computer peripheral interface Digital fieldbus isolation: CC-link, DeviceNet, profibus, SDS High speed A/D and D/A conversion AC plasma display panel level shifting Multiplexed data transmission Digital control power supply Ground loop elimination • • • • • AGENCY APPROVALS • • • • UL1577, file no. E52744 system code H, double protection cUL - file no. E52744, equivalent to CSA bulletin 5A DIN EN 60747-5-2 (VDE 0884)/ VDE available with option 1 Reinforced insulation rating per IEC60950 2.10.5.1 ORDERING INFORMATION S F H 6 7 # # - X PART NUMBER 0 0 PACKAGE OPTION # T TAPE AND REEL DIP-8 Option 6 7.62 mm 10.16 mm Option 7 > 0.7 mm SINGLE CHANNEL AGENCY CERTIFIED/PACKAGE DUAL CHANNEL CMR (kV/μs) CMR (kV/μs) BSI, UL, cUL 5 10 0.1 DIP-8 - - - - DIP-8, 400 mil, option 6 - SFH6742-X006 SFH6750-X006 - SFH6741-X007T - - SFH6752-X007T SMD-8, option 7 10 Note • For additional information on the available options refer to Option Information. Document Number: 82584 Rev. 2.1, 29-Apr-11 For technical questions, contact: [email protected] www.vishay.com 1 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SFH6741, SFH6742, SFH6750, SFH6752 Vishay Semiconductors High Speed Optocoupler, Single and Dual, 10 MBd TRUTH TABLE (positive logic) LED ENABLE OUTPUT On H L Off H H On L H Off L H On NC L Off NC H ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT Average forward current (single channel) IF 20 mA Average forward current (per channel for dual channel) IF 15 mA Reverse input voltage VR 5 V Enable input voltage (single channel) VE VCC + 0.5 V V Enable input current (single channel) IE 5 mA IFSM 200 mA Surge current t = 100 μs OUTPUT Supply voltage VCC 7 V Output current IO 50 mA Output voltage VO 7 V Output power dissipation (single channel) Pdiss 85 mW Output power dissipation per channel (dual channel) Pdiss 60 mW Storage temperature Tstg - 55 to + 150 °C Operating temperature Tamb - 40 to + 100 °C 260 °C COUPLER Lead solder temperature (single channel) for 10 s Solder reflow temperature (1) for 1 min Isolation test voltage t=1s VISO 260 °C 5300 VRMS Notes • Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (1) Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for through hole devices (DIP). RECOMMENDED OPERATING CONDITIONS SYMBOL MIN. MAX. UNIT Operating temperature PARAMETER Tamb - 40 100 °C Supply voltage VCC 4.5 5.5 V Input current low level IFL 0 250 μA Input current high level IFH 5 15 mA Logic high enable voltage VEH 2 VCC V Logic low enable voltage VEL 0 0.8 V Output pull up resistor RL 330 4K 5 - Fanout www.vishay.com 2 TEST CONDITION RL = 1 k N For technical questions, contact: [email protected] Document Number: 82584 Rev. 2.1, 29-Apr-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SFH6741, SFH6742, SFH6750, SFH6752 High Speed Optocoupler, Single and Dual, 10 MBd Vishay Semiconductors ELECTRICAL CHARACTERISTICS PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT IF = 10 mA VR = 5 V f = 1 MHz, VF = 0 V VF IR CI 1 1.4 0.01 55 1.7 10 V μA pF High level supply current (single channel) VE = 0.5 V, IF = 0 mA VE = VCC, IF = 0 mA ICCH ICCH 4.1 3.3 7 6 mA mA High level supply current (dual channel) IF = 0 mA ICCH 6.9 12 mA Low level supply current (single channel) VE = 0.5 V, IF = 10 mA VE = VCC, IF = 10 mA ICCL ICCL 4 3.3 7 6 mA mA Low level supply current (dual channel) IF = 10 mA ICCL 6.5 12 mA IOH 0.002 1 μA VOL 0.2 0.6 V ITH 2.4 5 mA IEH IEL VEH VEL - 0.6 - 0.8 - 1.6 - 1.6 mA mA V V INPUT Input forward voltage Reverse current Input capacitance OUTPUT High level output current Low level output voltage Input threshold current High level enable current Low level enable current High level enable voltage Low level enable voltage VE = 2 V, VO = 5.5 V, IF = 250 μA VE = 2 V, IF = 5 mA, IOL (sinking) = 13 mA VE = 2 V, VO = 5.5 V, IOL (sinking) = 13 mA VE = 2 V VE = 0.5 V 2 0.8 Note • Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. All typicals at Tamb = 25 °C, VCC = 5.5 V, unless otherwise specified. SWITCHING CHARACTERISTICS TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Propagation delay time to high output level PARAMETER RL = 350 , CL = 15 pF tPLH 20 48 100 ns Propagation delay time to low output level RL = 350 , CL = 15 pF tPHL 25 50 100 ns Pulse width disortion RL = 350 , CL = 15 pF |tPHL - tPLH| 2.9 35 ns Propagation delay skew RL = 350 , CL = 15 pF tPSK 8 40 ns Output rise time (10 % to 90 %) RL = 350 , CL = 15 pF tr 23 ns Output fall time (90 % to 10 %) RL = 350 , CL = 15 pF tf 7 ns Propagation delay time of enable from VEH to VEL RL = 350 , CL = 15 pF, VEL = 0 V, VEH = 3 V tELH 12 ns Propagation delay time of enable from VEL to VEH RL = 350 , CL = 15 pF, VEL = 0 V, VEH = 3 V tEHL 11 ns Note • Over recommended temperature (Tamb = - 40 °C to + 100 °C), VCC = 5 V, IF = 7.5 mA unless otherwise specified. All typicals at Tamb = 25 °C, VCC = 5 V. Document Number: 82584 Rev. 2.1, 29-Apr-11 For technical questions, contact: [email protected] www.vishay.com 3 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SFH6741, SFH6742, SFH6750, SFH6752 Vishay Semiconductors High Speed Optocoupler, Single and Dual, 10 MBd VCC Single channel Pulse gen. Zo = 50 Ω t f = t r = 5 ns VCC 8 VE 7 VOUT 1 IF 2 Input IF monitoring node RM 3 RL Output VO monitoring node 6 4 GND 5 IF = 7.5 mA IF = 3.75 mA 0 mA Input IF 0.1 µF bypass VOH 1.5 V VOL Output VO C L = 15 pF t PHL t PLH The probe and Jig capacitances are included in C L 18964-2 Fig. 1 - Single Channel Test Circuit for tPLH, tPHL, tr and tf Pulse Gen. Zo = 50 Ω t f = t r = 5 ns VCC Dual Channel IF Input Monitoring Node RM 1 VCC 8 2 7 3 6 4 5 GND RL 0.1 µF Bypass Output VO Monitoring Node CL= 15 pF 18963-2 Fig. 2 - Dual Channel Test Circuit for tPLH, tPHL, tr and tf Input VE monitoring node Pulse gen. Zo = 50 Ω t f = t r = 5 ns 1 7.5 mA IF VCC Single channel 2 VCC 8 VE 7 VOUT 3 4 6 GND RL 0.1 µF bypass Output VO monitoring node Input VE CL = 15 pF Output VO 3V 1.5 V tEHL tELH 1.5 V 5 The probe and Jig capacitances are included in CL 18975-2 Fig. 3 - Single Channel Test Circuit for tEHL, and tELH www.vishay.com 4 For technical questions, contact: [email protected] Document Number: 82584 Rev. 2.1, 29-Apr-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SFH6741, SFH6742, SFH6750, SFH6752 High Speed Optocoupler, Single and Dual, 10 MBd Vishay Semiconductors COMMON MODE TRANSIENT IMMUNITY PARAMETER Common mode transient immunity (high) TEST CONDITION SYMBOL MIN. |VCM| = 10 V, VCC = 5 V, IF = 0 mA, VO(min.) = 2 V, RL = 350 , Tamb = 25 °C (1) TYP. MAX. UNIT |CMH| 100 |VCM| = 50 V, VCC = 5 V, IF = 0 mA, VO(min.) = 2 V, RL = 350 , Tamb = 25 °C (2) |CMH| 5000 10 000 V/μs |VCM| = 1 kV, VCC = 5 V, IF = 0 mA, VO(min.) = 2 V, RL = 350 , Tamb = 25 °C (3) |CMH| 10 000 15 000 V/μs |VCM| = 10 V, VCC = 5 V, IF = 7.5 mA, VO(max.) = 0.8 V, RL = 350 , Tamb = 25 °C (1) |CML| 100 |VCM| = 50 V, VCC = 5 V, IF = 7.5 mA, VO(max.) = 0.8 V, RL = 350 , Tamb = 25 °C (2) |CML| 5000 10 000 V/μs |VCM| = 1 kV, VCC = 5 V, IF = 7.5 mA, VO(max.) = 0.8 V, RL = 350 , Tamb = 25 °C (3) |CML| 10 000 15 000 V/μs V/μs V/μs Notes (1) For SFH6750 (2) For SFH6741 (3) For SFH6742 and SFH6752 VCC IF Single channel 1 B A VFF 2 VCC 8 VE 7 VOUT 3 6 4 5 GND RL 0.1 µF bypass VCM (PEAK) VCM 0 V Output VO monitoring node Switch AT A: IF = 0 mA VO 5 V VO 0.5 V VO (min.) Switch AT A: IF = 7.5 mA VO (max.) VCM + Pulse generator ZO = 50 Ω CMH CML 18976-2 Fig. 4 - Single Channel Test Circuit for Common Mode Transient Immunity IF Dual Channel B 1 VCC 8 2 7 3 6 A VFF 4 18977 GND +5V RL Output VO Monitoring Node 0.1 µF Bypass 5 VCM + Pulse Generator Z O = 50 Ω Fig. 5 - Dual Channel Test Circuit for Common Mode Transient Immunity Document Number: 82584 Rev. 2.1, 29-Apr-11 For technical questions, contact: [email protected] www.vishay.com 5 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SFH6741, SFH6742, SFH6750, SFH6752 Vishay Semiconductors High Speed Optocoupler, Single and Dual, 10 MBd SAFETY AND INSULATION RATINGS PARAMETER TEST CONDITION SYMBOL MIN. Comparative tracking index CTI 175 Peak transient overvoltage VIOTM 8000 Peak insulation voltage VIORM 630 Climatic classification TYP. according to IEC 69 part 1 Safety rating - power output MAX. UNIT 55/110/21 399 V V PSO 500 mW Safety rating - input current ISI 300 mA Safety rating - temperature TSI 175 °C Creepage distance Standard DIP-8 Clearance distance Standard DIP-8 7 mm Creepage distance 400 mil DIP-8 8 mm Clearance distance Insulation thickness, reinforced rated 7 mm 400 mil DIP-8 8 mm per IEC60950.2.10.5.1 0.2 mm Note • As per IEC 60747-5-2, §7.4.3.8.1, this optocoupler is suitable for “safe electrical insulation” only within the safety ratings. Compliance with the safety ratings shall be ensured by means of prodective circuits. TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 7 1.6 IF = 20 mA 1.5 1.4 1.3 IF = 10 mA 1.2 IF = 1 mA 1.1 1.0 - 40 - 20 0 20 40 60 80 Fig. 6 - Forward Voltage vs. Ambient Temperature 1.60 VF - Forward Voltage (V) 1.55 1.50 1.45 1.40 1.35 1.30 1.25 1.20 1.15 1.10 0 17611 5 10 15 20 25 30 35 40 45 50 IF - Forward Current (mA) Fig. 7 - Forward Voltage vs. Forward Current www.vishay.com 6 5 4 VR = 5 V 3 2 1 0 - 40 - 20 100 Tamb - Ambient Temperature (°C) 17610 6 IR - Reverse Current (nA) IF = 50 mA 17613-1 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) Fig. 8 - Reverse Current vs. Ambient Temperature ICCI - Low Level Supply Current (mA) VF - Forward Voltage (V) 1.7 4.0 3.5 3.0 2.5 VCC = 7 V IF = 10 mA VCC = 5 V IF = 10 mA 2.0 1.5 1.0 0.5 0.0 - 40 - 20 17614 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) Fig. 9 - Low Level Supply Current vs. Ambient Temperature For technical questions, contact: [email protected] Document Number: 82584 Rev. 2.1, 29-Apr-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SFH6741, SFH6742, SFH6750, SFH6752 VOL - Low Level Output Voltage (V) 3.5 VCC = 7 V IF = 0.25 mA 3.4 3.3 VCC = 5 V IF = 0.25 mA 3.2 3.1 3.0 2.9 2.8 - 40 - 20 17615 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) 2.8 2.7 2.6 RL = 350 Ω 2.5 2.4 RL = 4 kΩ 2.3 RL = 1 kΩ 2.2 2.1 - 40 - 20 17616 0 20 40 60 80 ITH - Input Threshold Off Current (µA) Fig. 11 - Input Threshold On Current vs. Ambient Temperature 2.6 2.5 RL = 350 Ω 2.3 2.2 RL = 4 kΩ 2.1 RL = 1 kΩ 2.0 - 40 - 20 17617 0 20 40 60 Fig. 12 - Input Threshold Off Current vs. Ambient Temperature Document Number: 82584 Rev. 2.1, 29-Apr-11 IL = 16 mA IL = 13 mA 0.15 IL = 10 mA 0.10 IL = 6 mA 0.05 0.00 - 40 - 20 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) Fig. 13 - Low Level Output Voltage vs. Ambient Temperature 60 IF = 5 mA IF = 10 mA 50 40 30 20 10 0 - 40 - 20 17619 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) Fig. 14 - Low Level Output Current vs. Ambient Temperature 50 45 40 35 30 25 20 15 10 80 100 Tamb - Ambient Temperature (°C) VCC = 5.5 V IF = 5 mA 0.20 100 Tamb - Ambient Temperature (°C) 2.4 0.25 IOL - Low Level Output Current (mA) ITH - Input Threshold On Current (µA) Fig. 10 - High Level Supply Current vs. Ambient Temperature Vishay Semiconductors 0.30 17618 IOH - High Level Output Current (nA) ICCH - High Level Supply Current (mA) High Speed Optocoupler, Single and Dual, 10 MBd 17620 5 0 - 40 - 20 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) Fig. 15 - High Level Output Current vs. Ambient Temperature For technical questions, contact: [email protected] www.vishay.com 7 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SFH6741, SFH6742, SFH6750, SFH6752 Vishay Semiconductors High Speed Optocoupler, Single and Dual, 10 MBd PWD - Pulse Width Distortion (ns) 5.5 Vo - Output Voltage (V) 5.0 4.5 4.0 3.5 3.0 2.5 2.0 RL = 350 Ω 1.5 RL = 1 kΩ 1.0 RL = 4 kΩ 0.5 0.0 0 1 2 3 tPLH, 4 kΩ 100 tPLH, 1 kΩ tPLH, 350 Ω 40 tPHL, 350 Ω tPHL, 1 kΩ 20 tPHL, 4 kΩ 0 - 40 - 20 0 20 40 60 80 10 RL = 350 Ω 0 - 40 - 20 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) 60 50 RL = 4 kΩ 40 30 RL = 1 kΩ 20 10 RL = 350 Ω 0 5 9 7 11 13 15 IF - Forward Current (mA) 17625 Fig. 17 - Propagation Delay vs. Ambient Temperature Fig. 20 - Pulse Width Distortion vs. Forward Current 120 300 tPLH, 4 kΩ tr, f - Rise and Fall Time (ns) tP - Propagation Delay Time (ns) RL = 1 kΩ 100 Tamb - Ambient Temperature (°C) 17622 20 Fig. 19 - Pulse Width Distortion vs. Ambient Temperature PWD - Pulse Width Distortion (ns) tP - Propagation Delay Time (ns) 120 60 30 17624 Fig. 16 - Output Voltage vs. Forward Input Current 80 RL = 4 kΩ 40 5 4 IF - Forward Input Current (mA) 17621 50 100 80 tPLH, 1 kΩ tPLH, 350 Ω 60 40 tPHL, 350 Ω tPHL, 1 kΩ 20 tPHL, 4 kΩ tr, RL = 4 kΩ 250 200 150 17623 7 9 11 13 tr, RL = 1 kΩ 50 Fig. 18 - Propagation Delay vs. Forward Current www.vishay.com 8 tr, RL = 350 Ω 0 - 40 - 20 15 IF - Forward Current (mA) tf, RL = 1 kΩ tf, RL = 4 kΩ 100 0 5 tf, RL = 350 Ω 17626 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) Fig. 21 - Rise and Fall Time vs. Ambient Temperature For technical questions, contact: [email protected] Document Number: 82584 Rev. 2.1, 29-Apr-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SFH6741, SFH6742, SFH6750, SFH6752 High Speed Optocoupler, Single and Dual, 10 MBd tE - Enable Propagation Delay (ns) tr, f - Rise and Fall Time (ns) 300 tr, RL = 4 kΩ 250 200 150 tf, RL = 350 Ω tf, RL = 1 kΩ tf, RL = 4 kΩ 100 tr, RL = 1 kΩ 50 tr, RL = 350 Ω 0 5 17627 7 9 11 13 60 50 tELH = 4 kΩ 40 tELH = 1 kΩ 20 10 tEHL = 1 kΩ 0 - 40 - 20 0 tEHL = 4 kΩ 20 40 60 80 100 Tamb - Ambient Temperature (°C) 17628 Fig. 22 - Rise and Fall Time vs. Forward Current tELH = 350 Ω tEHL = 350 Ω 30 15 IF - Forward Current (mA) Vishay Semiconductors Fig. 23 - Enable Propagation Delay vs. Ambient Temperature PACKAGE DIMENSIONS in millimeters Pin one ID 4 3 2 1 5 6 7 8 6.645 ± 0.165 ISO method A 9.77 ± 0.14 0.95 ± 0.19 7.62 typ. 0.79 4° typ. 3.555 ± 0.255 6.095 ± 0.255 1.27 10° 0.70 ± 0.19 0.51 ± 0.05 3.045 ± 0.255 3° to 9° 2.54 typ. i178006 Document Number: 82584 Rev. 2.1, 29-Apr-11 0.25 ± 0.05 For technical questions, contact: [email protected] www.vishay.com 9 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SFH6741, SFH6742, SFH6750, SFH6752 Vishay Semiconductors High Speed Optocoupler, Single and Dual, 10 MBd PACKAGE DIMENSIONS in millimeters Option 6 Option 7 Option 9 10.36 9.96 7.62 typ. 9.53 10.03 7.8 7.4 7.62 ref. 0.7 4.6 4.1 0.102 0.249 8 min. 0.25 typ. 0.51 1.02 0.35 0.25 8.4 min. 15° max. 8 min. 10.16 10.92 10.3 max. 18450 PACKAGE MARKING (for example) SFH6741 X007 V YWW H 68 Notes • Option 1 and VDE logos are only marked on option 1 parts. • Tape and reel suffix (T) is not part of the package marking. www.vishay.com 10 For technical questions, contact: [email protected] Document Number: 82584 Rev. 2.1, 29-Apr-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000