6N137, VO2601, VO2611, VO2630, VO2631, VO4661 Vishay Semiconductors High Speed Optocoupler, 10 MBd FEATURES • Choice of CMR performance of 15 kV/µs, 5 kV/µs, and 100 V/µs • High speed: 10 Mbd typical • + 5 V CMOS compatibility • Pure tin leads Dual channel Single channel NC A 1 8 2 7 C 3 6 NC 4 5 VCC VE VO GND A1 1 8 C1 C2 2 7 3 6 A2 4 5 6N137, VO2601, VO2611 VCC VO1 VO2 GND VO2630, VO2631, VO4661 18921-15 DESCRIPTION • Guaranteed AC and DC performance over temperature: - 40 °C to + 100 °C temperature range • Meets IEC 60068-2-42 (SO2) and IEC 60068-2-43 (H2S) requirements • Low input current capability: 5 mA • Lead (Pb)-free component The 6N137, VO2601 and VO2611 are single channel 10 Mbd optocouplers utilizing a high efficient input LED coupled with an integrated optical photodiode IC detector. The detector has an open drain NMOS-transistor output, providing less leakage compared to an open collector Schottky clamped transistor output. The VO2630, VO2631 and VO4661 are dual channel 10 MBd optocouplers. For the single channel type, an enable function on pin 7 allows the detector to be strobed. The internal shield provides a guaranteed common mode transient immunity of 5 kV/µs for the VO2601 and VO2631 and 15 kV/µs for the VO2611 and VO4661. The use of a 0.1 µF bypass capacitor connected between pin 5 and 8 is recommended. • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC APPLICATIONS • Microprocessor system interface • PLC, ATE input/output isolation • Computer peripheral interface • Digital fieldbus isolation: CC-link, DeviceNet, profibus, SDS • High speed A/D and D/A conversion • AC plasma display panel level shifting • Multiplexed data transmission AGENCY APPROVALS • UL1577, file no. E52744 system code H or J, double protection • CUL - file no. E52744, equivalent to CSA bulletin 5A • DIN EN 60747-5-5 (VDE 0884) available with option 1 • BSI IEC 60950 • Digital control power supply • Ground loop elimination ORDER INFORMATION PART REMARKS 6N137 100 V/µs, single channel, DIP-8 6N137-X006 100 V/µs, single channel, DIP-8 400 mil 6N137-X007 100 V/µs, single channel, SMD-8 VO2601 5 kV/µs, single channel, DIP-8 VO2601-X006 5 kV/µs, single channel, DIP-8 400 mil VO2601-X007 5 kV/µs, single channel, SMD-8 VO2611 15 kV/µs, single channel, DIP-8 VO2611-X006 15 kV/µs, single channel, DIP-8 400 mil VO2611-X007 15 kV/µs, single channel, SMD-8 VO2630 100 V/µs, dual channel, DIP-8 VO2630-X006 100 V/µs, dual channel, DIP-8 400 mil VO2630-X007 100 V/µs, dual channel, SMD-8 VO2631 VO2631-X006 www.vishay.com 174 5 kV/µs, dual channel, DIP-8 5 kV/µs, dual channel, DIP-8 400 mil For technical questions, contact: [email protected] Document Number: 84732 Rev. 1.3, 06-Oct-08 6N137, VO2601, VO2611, VO2630, VO2631, VO4661 High Speed Optocoupler, 10 MBd Vishay Semiconductors ORDER INFORMATION PART REMARKS VO2631-X007 5 kV/µs, dual channel, SMD-8 VO4661 15 kV/µs, dual channel, DIP-8 VO4661-X006 15 kV/µs, dual channel, DIP-8 400 mil VO4661-X007 15 kV/µs, dual channel, SMD-8 Note For additional information on the available options refer to option information. TRUTH TABLE (Positive Logic) LED ENABLE ON H L OFF H H ON L H OFF L H ON NC L OFF NC H ABSOLUTE MAXIMUM RATINGS PARAMETER OUTPUT (1) TEST CONDITION SYMBOL VALUE UNIT Average forward current (single channel) IF 20 mA Average forward current (per channel for dual channel) IF 15 mA V INPUT Reverse input voltage VR 5 Enable input voltage VE VCC + 0.5 V V Enable input current IE 5 mA Surge current IFSM 200 mA Output power dissipation (single channel) t = 100 µs Pdiss 35 mW Output power dissipation (per channel for dual channel) Pdiss 25 mW OUTPUT VCC 7 V Output current Supply voltage 1 min maximum IO 50 mA Output voltage VO 7 V Output power dissipation (single channel) Pdiss 85 mW Output power dissipation (per channel for dual channel) Pdiss 60 mW VISO 5300 VRMS Tstg - 55 to + 150 °C Tamb - 40 to + 100 °C 260 °C 260 °C COUPLER Isolation test voltage t = 1.0 s Storage temperature Operating temperature Lead solder temperature for 10 s Solder reflow temperature (2) Notes (1) T amb = 25 °C, unless otherwise specified. Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (2) Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for through hole devices (DIP). Document Number: 84732 Rev. 1.3, 06-Oct-08 For technical questions, contact: [email protected] www.vishay.com 175 6N137, VO2601, VO2611, VO2630, VO2631, VO4661 Vishay Semiconductors High Speed Optocoupler, 10 MBd RECOMMENDED OPERATING CONDITIONS SYMBOL MIN. MAX. UNIT Operating temperature PARAMETER TEST CONDITION Tamb - 40 100 °C Supply voltage VCC 4.5 5.5 V Input current low level IFL 0 250 µA Input current high level IFH 5 15 mA Logic high enable voltage VEH 2 VCC V Logic low enable voltage VEL 0 0.8 V RL 330 4K Ω 5 - Output pull up resistor Fanout RL = 1 kΩ N ELECTRICAL CHARACTERISTICS PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT IF = 10 mA VF 1.1 VR = 5 V IR 1.4 1.7 V 0.01 10 µA f = 1 MHz, VF = 0 V CI 55 VE = 0.5 V, IF = 0 mA ICCH 4.1 7.0 mA VE = VCC, IF = 0 mA ICCH 3.3 6.0 mA IF = 0 mA ICCH 6.5 12.0 mA VE = 0.5 V, IF = 10 mA ICCL 4.0 7.0 mA VE = VCC, IF = 10 mA ICCL 3.3 6.0 mA Low level supply current (dual channel) IF = 10 mA ICCL 6.5 12.0 mA High level output current VE = 2 V, VO = 5.5 V, IF = 250 µA IOH 0.002 1 µA Low level output voltage VE = 2 V, IF = 5 mA, IOL (sinking) = 13 mA VOL 0.2 0.6 V Input threshold current VE = 2 V, VO = 5.5 V, IOL (sinking) = 13 mA ITH 2.4 5.0 mA High level enable current VE = 2 V IEH - 0.6 - 1.6 mA Low level enable current VE = 0.5 V IEL - 0.8 - 1.6 mA INPUT Input forward voltage Reverse current Input capacitance pF OUTPUT High level supply current (single channel) High level supply current (dual channel) Low level supply current (single channel) High level enable voltage VEH Low level enable voltage VEL 2 V 0.8 V Note Tamb = 25 °C, unless otherwise specified. Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. www.vishay.com 176 For technical questions, contact: [email protected] Document Number: 84732 Rev. 1.3, 06-Oct-08 6N137, VO2601, VO2611, VO2630, VO2631, VO4661 High Speed Optocoupler, 10 MBd SWITCHING CHARACTERISTICS PARAMETER Vishay Semiconductors (1) TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT RL = 350 Ω, CL = 15 pF tPLH 20 48 75 (2) ns Propagation delay time to low output level RL = 350 Ω, CL = 15 pF tPHL Propagation delay time to high output level tPLH 25 50 tPHL 100 ns 75 (2) ns 100 ns Pulse width disortion RL = 350 Ω, CL = 15 pF |tPHL - tPLH| 2.9 35 ns Propagation delay skew RL = 350 Ω, CL = 15 pF tPSK 8 40 ns Output rise time (10 to 90 %) RL = 350 Ω, CL = 15 pF tr 23 ns Output fall time (90 to 10 %) RL = 350 Ω, CL = 15 pF tf 7 ns Propagation delay time of enable from VEH to VEL RL = 350 Ω, CL = 15 pF, VEL = 0 V, VEH = 3 V tELH 12 ns Propagation delay time of enable from VEL to VEH RL = 350 Ω, CL = 15 pF, VEL = 0 V, VEH = 3 V tEHL 11 ns Notes (1) Over recommended temperature (T amb = - 40 °C to + 100 °C), VCC = 5 V, IF = 7.5 mA unless otherwise specified. All typicals at Tamb = 25 °C, VCC = 5 V. (2) 75 ns applies to the 6N137 only, a JEDEC registered specification VCC Single channel Pulse gen. Zo = 50 Ω t f = t r = 5 ns 1 IF 2 Input IF monitoring node RM VCC 8 VE 7 VOUT 3 4 RL 0.1 µF bypass 6 GND 5 IF = 7.5 mA IF = 3.75 mA 0 mA Input IF Output VO monitoring node VOH 1.5 V VOL Output VO C L = 15 pF t PHL The probe and Jig capacitances are included in C L t PLH 18964-2 Fig. 1 - Single Channel Test Circuit for tPLH, tPHL, tr and tf Pulse gen. Zo = 50 Ω t f = t r = 5 ns VCC Dual channel IF Input monitoring node RM 1 VCC 8 2 7 3 6 4 5 GND RL 0.1 µF bypass Output VO monitoring node CL= 15 pF 18963-5 Fig. 2 - Dual Channel Test Circuit for tPLH, tPHL, tr and tf Document Number: 84732 Rev. 1.3, 06-Oct-08 For technical questions, contact: [email protected] www.vishay.com 177 6N137, VO2601, VO2611, VO2630, VO2631, VO4661 High Speed Optocoupler, 10 MBd Vishay Semiconductors Input VE monitoring node Pulse gen. Zo = 50 Ω t f = t r = 5 ns VCC 8 VE 7 VOUT 1 7.5 mA IF VCC Single channel 2 3 RL 0.1 µF bypass 6 4 Output VO monitoring node Input VE CL = 15 pF Output VO 3V 1.5 V tEHL tELH 1.5 V 5 GND The probe and Jig capacitances are included in CL 18975-2 Fig. 3 - Single Channel Test Circuit for tEHL, and tELH COMMON MODE TRANSIENT IMMUNITY PARAMETER Common mode transient immunity (high) TEST CONDITION SYMBOL MIN. |VCM| = 10 V, VCC = 5 V, IF = 0 mA, VO(min.) = 2 V, RL = 350 Ω, Tamb = 25 °C (1) TYP. MAX. UNIT |CMH| 100 |VCM| = 50 V, VCC = 5 V, IF = 0 mA, VO(min.) = 2 V, RL = 350 Ω, Tamb = 25 °C (2) |CMH| 5000 10 000 V/µs |VCM| = 1 kV, VCC = 5 V, IF = 0 mA, VO(min.) = 2 V, RL = 350 Ω, Tamb = 25 °C (3) |CMH| 15 000 25 000 V/µs |VCM| = 10 V, VCC = 5 V, IF = 7.5 mA, VO(max.) = 0.8 V, RL = 350 Ω, Tamb = 25 °C (1) |CML| 100 |VCM| = 50 V, VCC = 5 V, IF = 7.5 mA, VO(max.) = 0.8 V, RL = 350 Ω, Tamb = 25 °C (2) |CML| 5000 10 000 V/µs |VCM| = 1 kV, VCC = 5 V, IF = 7.5 mA, VO(max.) = 0.8 V, RL = 350 Ω, Tamb = 25 °C (3) |CML| 15 000 25 000 V/µs V/µs V/µs Notes (1) For 6N137 and VO2630 (2) For VO2601 and VO2631 (3) For VO2611 and VO4661 VCC IF Single channel 1 B A VFF 2 VCC 8 VE 7 VOUT 3 6 4 5 GND RL 0.1 µF bypass Output VO monitoring node VCM (PEAK) VCM 0 V Switch AT A: IF = 0 mA VO 5 V VO 0.5 V VO (min.) Switch AT A: IF = 7.5 mA VO (max.) VCM + Pulse generator ZO = 50 Ω CMH CML 18976-2 Fig. 4 - Single Channel Test Circuit for Common Mode Transient Immunity www.vishay.com 178 For technical questions, contact: [email protected] Document Number: 84732 Rev. 1.3, 06-Oct-08 6N137, VO2601, VO2611, VO2630, VO2631, VO4661 High Speed Optocoupler, 10 MBd Vishay Semiconductors IF Dual channel B 1 VCC 8 2 7 3 6 VCC A VFF 4 GND RL 0.1 µF bypass Output VO monitoring node 5 VCM + Pulse generator Z O = 50 Ω 18977-1 Fig. 5 - Dual Channel Test Circuit for Common Mode Transient Immunity SAFETY AND INSULATION RATINGS PARAMETER TEST CONDITION SYMBOL MIN. Comparative tracking index CTI 175 Peak transient overvoltage VIOTM 8000 V Peak insulation voltage VIORM 890 V Climatic classification according to IEC 68 part 1 TYP. MAX. UNIT 55/100/21 399 Safety rating - power output PSO 500 mW Safety rating - input current ISI 300 mA Safety rating - temperature TSI 175 7 °C Creepage distance standard DIP-8 mm Clearance distance standard DIP-8 7 mm Creepage distance 400 mil DIP-8 8 mm Clearance distance 400 mil DIP-8 8 mm Insulation thickness, reinforced rated per BSI 60950 0.2 mm Note As per IEC 60747-5-2, §7.4.3.8.1, this optocoupler is suitable for “safe electrical insulation” only within the safety ratings. Compliance with the safety ratings shall be ensured by means of prodective circuits. Document Number: 84732 Rev. 1.3, 06-Oct-08 For technical questions, contact: [email protected] www.vishay.com 179 6N137, VO2601, VO2611, VO2630, VO2631, VO4661 High Speed Optocoupler, 10 MBd Vishay Semiconductors TYPICAL CHARACTERISTICS IF = 50 mA IF = 20 mA 1.5 1.4 1.3 IF = 10 mA 1.2 IF = 1 mA 1.1 1.0 - 40 - 20 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) 17610 Fig. 6 - Forward Voltage vs. Ambient Temperature 1.60 VF - Forward Voltage (V) 1.55 1.50 1.45 1.40 1.35 1.30 1.25 1.20 1.15 1.10 0 5 10 15 20 25 30 35 40 45 50 IF - Forward Current (mA) 17611 IR - Reverse Current (nA) 7 6 5 4 VR = 5 V 2 1 0 - 40 - 20 17613-1 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) Fig. 8 - Reverse Current vs. Ambient Temperature www.vishay.com 180 3.5 3.0 2.5 VCC = 7 V IF = 10 mA VCC = 5 V IF = 10 mA 2.0 1.5 1.0 0.5 0.0 - 40 - 20 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) Fig. 9 - Low Level Supply Current vs. Ambient Temperature 3.5 VCC = 7 V IF = 0.25 mA 3.4 3.3 VCC = 5 V IF = 0.25 mA 3.2 3.1 3.0 2.9 2.8 - 40 - 20 17615 Fig. 7 - Forward Voltage vs. Forward Current 3 4.0 17614 ICCH - High Level Supply Current (mA) 1.6 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) Fig. 10 - High Level Supply Current vs. Ambient Temperature ITH - Input Threshold on Current (mA) VF - Forward Voltage (V) 1.7 ICCI - Low Level Supply Current (mA) Tamb = 25 °C, unless otherwise specified 2.8 2.7 2.6 RL = 350 Ω 2.5 2.4 RL = 4 kΩ 2.3 RL = 1 kΩ 2.2 2.1 - 40 - 20 17616 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) Fig. 11 - Input Threshold On Current vs. Ambient Temperature For technical questions, contact: [email protected] Document Number: 84732 Rev. 1.3, 06-Oct-08 6N137, VO2601, VO2611, VO2630, VO2631, VO4661 IOH - High Level Output Current (nA) ITH - Input Threshold off Current (mA) High Speed Optocoupler, 10 MBd 2.6 2.5 2.4 RL = 350 Ω 2.3 2.2 RL = 4 kΩ 2.1 RL = 1 kΩ 2.0 - 40 - 20 0 20 40 60 40 35 30 25 20 15 10 5 0 - 40 - 20 VCC = 5.5 V IF = 5 mA IL = 16 mA IL = 13 mA 0.15 IL = 10 mA 0.10 IL = 6 mA 0.05 60 80 100 4.5 4.0 3.5 3.0 2.5 2.0 RL = 350 Ω 1.5 RL = 1 kΩ 1.0 RL = 4 kΩ 0.5 0.00 - 40 - 20 0.0 0 20 40 60 80 0 100 Tamb - Ambient Temperature (°C) tP - Propagation Delay time (ns) 50 40 30 20 10 0 - 40 - 20 0 20 40 60 80 Fig. 14 - Low Level Output Current vs. Ambient Temperature Document Number: 84732 Rev. 1.3, 06-Oct-08 3 5 4 120 tPLH, 4 kΩ 100 80 60 40 tPLH, 1 kΩ tPLH, 350 Ω tPHL, 350 Ω 20 100 Tamb - Ambient Temperature (°C) 2 Fig. 16 - Output Voltage vs. Forward Input Current 60 IF = 5 mA IF = 10 mA 1 IF - Forward Input Current (mA) 17621 Fig. 13 - Low Level Output Voltage vs. Ambient Temperature IOL - Low Level Output Current (mA) 40 5.0 0.20 17619 20 5.5 0.30 17618 0 Tamb - Ambient Temperature (°C) Fig. 15 - High Level Output Current vs. Ambient Temperature Vo - Output Voltage (V) VOL - Low Level Output Voltage (V) 45 17620 Fig. 12 - Input Threshold Off Current vs. Ambient Temperature 0.25 50 80 100 Tamb - Ambient Temperature (°C) 17617 Vishay Semiconductors 17622 tPHL, 1 kΩ tPHL, 4 kΩ 0 - 40 - 20 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) Fig. 17 - Propagation Delay vs. Ambient Temperature For technical questions, contact: [email protected] www.vishay.com 181 6N137, VO2601, VO2611, VO2630, VO2631, VO4661 High Speed Optocoupler, 10 MBd 120 300 tr, f - Rise and Fall Time (ns) tPLH, 4 kΩ 100 80 tPLH, 1 kΩ tPLH, 350 Ω 60 40 tPHL, 350 Ω tPHL, 1 kΩ 20 tPHL, 4 kΩ 5 7 9 11 13 150 tr, RL = 1 kΩ 50 tr, RL = 350 Ω 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) Fig. 21 - Rise and Fall Time vs. Ambient Temperature tr, f - Rise and Fall Time (ns) 300 RL = 4 kΩ 40 30 20 RL = 1 kΩ 10 RL = 350 Ω 0 - 40 - 20 tr, RL = 4 kΩ 250 200 150 tf, RL = 350 Ω tf, RL = 1 kΩ tf, RL = 4 kΩ 100 tr, RL = 1 kΩ 50 tr, RL = 350 Ω 0 0 20 40 60 80 5 100 Tamb - Ambient Temperature (°C) 17624 17627 Fig. 19 - Pulse Width Distortion vs. Ambient Temperature 7 9 11 13 15 IF - Forward Current (mA) Fig. 22 - Rise and Fall Time vs. Forward Current 60 60 50 RL = 4 kΩ 40 30 RL = 1 kΩ 20 10 RL = 350 Ω 0 5 7 9 11 13 15 IF - Forward Current (mA) Fig. 20 - Pulse Width Distortion vs. Forward Current www.vishay.com 182 tf, RL = 1 kΩ tf, RL = 4 kΩ 100 0 - 40 - 20 50 17625 tf, RL = 350 Ω 17626 Fig. 18 - Propagation Delay vs. Forward Current PWD - Pulse Width Distortion (ns) 200 15 IF - Forward Current (mA) 17623 PWD - Pulse Width Distortion (ns) tr, RL = 4 kΩ 250 0 tE - Enable Propagation Delay (ns) tP - Propagation Delay time (ns) Vishay Semiconductors 50 tELH = 4 kΩ 40 30 20 tELH = 1 kΩ tELH = 350 Ω tEHL = 350 Ω 10 tEHL = 1 kΩ tEHL = 4 kΩ 0 - 40 - 20 0 20 40 60 80 Tamb - Ambient Temperature (°C) 17628 100 Fig. 23 - Enable Propagation Delay vs. Ambient Temperature For technical questions, contact: [email protected] Document Number: 84732 Rev. 1.3, 06-Oct-08 6N137, VO2601, VO2611, VO2630, VO2631, VO4661 High Speed Optocoupler, 10 MBd Vishay Semiconductors PACKAGE DIMENSIONS in inches (millimeters) Pin one ID 4 3 2 1 5 6 7 8 0.255 (6.48) 0.268 (6.81) ISO method A 0.379 (9.63) 0.390 (9.91) 0.030 (0.76) 0.045 (1.14) 0.300 (7.62) typ. 0.031 (0.79) 4° typ. 0.130 (3.30) 0.150 (3.81) 0.230 (5.84) 0.050 (1.27) 10° 0.020 (0.51) 0.035 (0.89) 0.018 (0.46) 0.022 (0.56) 3° to 9° 0.110 (2.79) 0.130 (3.30) 0.008 (0.20) 0.012 (0.30) 0.100 (2.54) typ. i178006 Option 6 Option 7 Option 9 0.407 (10.36) 0.391 (9.96) 0.307 (7.8) 0.291 (7.4) 0.300 (7.62) typ. 0.375 (9.53) 0.395 (10.03 ) 0.300 (7.62) ref. 0.028 (0.7) 0.180 (4.6) 0.160 (4.1) 0.315 (8.0) min. 0.014 (0.35) 0.010 (0.25) 0.400 (10.16) 0.430 (10.92) Document Number: 84732 Rev. 1.3, 06-Oct-08 0.250 (6.35) 0.0040 (0.102) 0.0098 (0.249) 0.331 (8.4) min. 0.406 (10.3) max. For technical questions, contact: [email protected] 0.012 (0.30 ) typ. 0.020 (0.51 ) 0.040 (1.02 ) 15° max. 0.315 (8.00) min. 18450 www.vishay.com 183 6N137, VO2601, VO2611, VO2630, VO2631, VO4661 Vishay Semiconductors High Speed Optocoupler, 10 MBd OZONE DEPLETING SUBSTANCES POLICY STATEMENT It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively. 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA. 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany www.vishay.com 184 For technical questions, contact: [email protected] Document Number: 84732 Rev. 1.3, 06-Oct-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1