Incremental encoders Solid shaft with clamping or synchro flange 64...2048 pulses per revolution BRIV 58K, BRIV 58S - EcoMag Features –– Encoder with solid shaft ø10 mm or ø6 mm –– Magnetic sensing –– Max. 2048 pulses per revolution –– High resistance to shock and vibrations –– High limit frequency –– Clamping or synchro flange Technical data - mechanical design Voltage supply 5 VDC ±10 % 10...30 VDC Size (flange) ø58 mm Consumption typ. 30 mA (5 VDC, w/o load) 15 mA (24 VDC, w/o load) Protection DIN EN 60529 IP 42, IP 65 Operating speed Pulses per revolution 64...2048 ≤12000 rpm (IP 42) ≤6000 rpm (IP 65) Reference signal Zero pulse, width 90° Operating torque typ. 0.0175 Nm (IP 42) 0.047 Nm (IP 65) Sensing method Magnetic Materials Output frequency ≤320 kHz Housing: aluminium Flange: aluminium Output signals A 90° B, N + inverted Operating temperature -20...+85 °C Output stages Antivalent Push-pull short-circuit proof Relative humidity 95 % non-condensing Resistance Interference immunity DIN EN 61000-6-2 Emitted interference DIN EN 61000-6-3 Approval UL approval / E217823 DIN EN 60068-2-6 Vibration 30 g, 10-2000 Hz DIN EN 60068-2-27 Shock 500 g, 6 ms Connection Connector M12, 5-pin Connector M12, 8-pin Connector M23, 12-pin Cable 2 m Weight approx. 150 g BRIV 58K Shaft type ø10 mm solid shaft (clamping flange) Admitted shaft load ≤40 N axial ≤60 N radial Flange Clamping flange BRIV 58S 1 Shaft type ø6 mm solid shaft (synchro flange) Admitted shaft load ≤40 N axial ≤50 N radial Flange Synchro flange www.baumer.com/motion 13/8/2015 Technical data - electrical ratings Subject to modification in technic and design. Errors and omissions excepted. BRIV 58K with clamping flange Incremental encoders Solid shaft with clamping or synchro flange 64...2048 pulses per revolution BRIV 58K, BRIV 58S - EcoMag Part number Clamping flange Synchro flange BRIV 58K16 BRIV 58S16 Connection 5 Cable 2 m, radial A Connector M23, radial N Connector M12, radial Connection 5 Cable 2 m, radial A Connector M23, radial N Connector M12, radial Solid shaft 10 ø10 mm, IP 42 C0 ø10 mm, IP 65 Solid shaft 06 ø6 mm, IP 42 C6 ø6 mm, IP 65 Pulse number - see table Pulse number - see table Voltage supply / signals 05A 5 VDC / antivalent (TTL compatible) 24K 10...30 VDC / push-pull short-circuit proof Voltage supply / signals 05A 5 VDC / antivalent (TTL compatible) 24K 10...30 VDC / push-pull short-circuit proof Pulse number 1024 1800 Connectors and cables 2000 2048 Other pulse numbers on request. Trigger level 10107687 Female connector M23, 12-pin, straight, without cable 10130367 Female connector M23, 12-pin, straight, 2 m cable 10118532 Female connector M23, 12-pin, straight, 5 m cable 10146775 Female connector M12, 8-pin, straight, without cable 10153968 Female connector M12, 5-pin, straight, without cable Outputs 05A Complementary Linedriver RS422 Output level High >2,4 V (I = -20 mA) Output level Low <0,4 V (I = 20 mA) Load High <20 mA Load Low <20 mA 11046264 Female connector M12, 5-pin, straight, 2 m cable Outputs 24K Push-pull short-circuit protection 11046266 Female connector M12, 5-pin, straight, 5 m cable Output level High >+Vs - 3,7 V (I = -30 mA) Output level Low <2,5 V (I = 30 mA) Mounting accessories for BRIV 58K Load High <30 mA Load Low <30 mA 10252773 Clamp set ø15 mm 11053277 Bellows coupling aluminium/stainless steel 10 mm Mounting accessories for BRIV 58S 10252773 2 Clamp set ø15 mm www.baumer.com/motion Subject to modification in technic and design. Errors and omissions excepted. 512 1000 13/8/2015 64 360 Accessories Incremental encoders Solid shaft with clamping or synchro flange 64...2048 pulses per revolution BRIV 58K, BRIV 58S - EcoMag Terminal assignment Cable for connection reference -5 05A Connector M23, 12-pin for connection reference -A 05A, 24K 24K Core colour Signals Core colour Signals Connector Signals brown brown +Vs Pin 1 CHA comp. +Vs green CHA green CHA Pin 2 +Vs ret CHA comp. – – Pin 3 CHN yellow CHB yellow CHB Pin 4 CHN comp. blue CHB comp. – – Pin 5 CHB pink CHN pink CHN Pin 6 CHB comp. grey CHN comp. – – Pin 7 n.c. white 0V white 0V Pin 8 CHA Cable data 8 x 0.14 mm2 5 x 0.14 mm2 Pin 9 Housing Pin 10 0V Pin 11 -12 n.c. Screen: connected to housing Output signals 9 8 1 Counter clockwise rotating direction when looking at the flange. 05A 2 12 10 3 4 11 7 6 5 CHA CHB comp. CHN 90° CHN comp. Counter clockwise rotating direction when looking at the flange. 24K Connector Core colour* Signals Pin 1 white 0V Pin 2 brown +Vs Pin 3 green CHA Pin 4 yellow CHB Pin 5 grey CHN inv. Pin 6 pink CHN Pin 7 blue CHB inv. Pin 8 red CHA inv. Core colour* Signals 24K Connector Pin 1 brown +Vs CHA Pin 2 white 0V Pin 3 blue CHA CHB Pin 4 black CHB Pin 5 grey CHN CHN *valid for the assembled mating connectors (see access.) 90° 6 7 1 3 5 8 4 4 3 2 5 1 3 2 www.baumer.com/motion 13/8/2015 CHB Subject to modification in technic and design. Errors and omissions excepted. Connector M12, 8-pin / 5-pin for connection reference -N 05A CHA comp. Incremental encoders Solid shaft with clamping or synchro flange 64...2048 pulses per revolution BRIV 58K, BRIV 58S - EcoMag Dimensions BRIV 58 clamping flange, cable radial 20 10 15 BRIV 58 clamping flange, connector output M23 radial 40 20 10 15 13,5 M3 x 7 ° 3 x 120 13,5 3 3 3 36 h8 48 ±0,1 58 36 h8 48 ±0,1 58 BRIV 58 clamping flange, connector output M12 radial 40 M3 x 7 3 x 120 ° M4 x 6 3 x 120˚ 0 -0,018 ø 10 f6 9 15 13,5 3 36 h8 48 ±0,1 58 3 10 16 ø 6 13,5 4 3 3 46 42 50 0 -0,025 58 BRIV 58 synchro flange, connector output M23 radial 10 BRIV 58 clamping flange, connector output M12 radial 46 10 46 0 -0,018 6 M4 x 0° 2 3x1 ø 6 ø 6 0 -0,018 M4 x 60° 3 x 12 4 13 25 3 3 11 4 42 13,5 50 0 -0,025 3 3 42 50 0 -0,025 58 58 4 www.baumer.com/motion Subject to modification in technic and design. Errors and omissions excepted. 20 10 BRIV 58 synchro flange, cable radial 13/8/2015 3 40 ø 10 f6 9 ø 10 f6 9 M3 x 7 ˚ 3 x 120