Incremental encoders Solid shaft with EURO flange B10 100…5000 pulses per revolution EIL580 with EURO flange B10 Features –– Size ø58 mm –– Precise optical sensing –– Output signal level TTL or HTL –– EURO flange B10 –– Connection radial –– Pulses per revolution up to 5000 –– High protection up to IP 67 –– High resistance to shock and vibrations Technical data - mechanical design Voltage supply Size (flange) ø115 mm Shaft type ø11 x 30 mm solid shaft with woodruff key Shaft loading ≤40 N axial ≤80 N radial Protection DIN EN 60529 IP 65 (without shaft seal), IP 67 (with shaft seal) Operating speed ≤6000 rpm (+20 °C, IP 67) ≤12000 rpm (+20 °C, IP 65) Starting torque ≤0.015 Nm (+20 °C, IP 65) ≤0.02 Nm (+20 °C, IP 67) Materials Housing: aluminium die-cast Flange: aluminium Solid shaft: stainless steel Operating temperature -40...+85 °C Relative humidity 90 % non-condensing Resistance DIN EN 60068-2-6 Vibration 30 g, 10-2000 Hz DIN EN 60068-2-27 Shock 300 g, 6 ms Connection Flange connector M12, 8-pin Flange connector M23, 12-pin Cable Weight approx. 485 g 5 VDC ±5 % 8...30 VDC 4.75...30 VDC Reverse polarity protection Yes Short-circuit proof Yes (HTL) Yes (TTL, max. 1 s and 1 signal) Consumption w/o load ≤70 mA Pulses per revolution 100...5000 Phase shift 90° ±10° Scan ratio 40...60 % Reference signal Zero pulse, width 90° ±10 % Sensing method Optical Output frequency ≤300 kHz (TTL) ≤160 kHz (HTL) Output signals A+, B+, R+, A-, B-, R- Output stages TTL/RS422 HTL/push-pull Interference immunity DIN EN 61000-6-2 Emitted interference DIN EN 61000-6-3 Approval UL 508 / CSA 22.2 1 www.baumer.com/motion 16/3/2015 Technical data - electrical ratings Subject to modification in technic and design. Errors and omissions excepted. EIL580 with EURO flange B10 Incremental encoders Solid shaft with EURO flange B10 100…5000 pulses per revolution EIL580 with EURO flange B10 Part number EURO flange B10 EIL580-S 1 B1 . . .A Pulse number - see table E H N Q F B R L Voltage supply / output stages 5 VDC, TTL/RS422, 6 channels 8...30 VDC, TTL/RS422, 6 channels 8...30 VDC, HTL/push-pull, 6 channels 4.75...30 VDC, HTL/push-pull, 6 channels Connection Flange connector M23, 12-pin, radial, male, ccw Flange connector M12, 8-pin, radial, male, ccw Cable radial, 1 m Cable radial, 2 m Protection 5 IP 65 7 IP 67 Specification solid shaft B1 ø11 x 30 mm, with woodruff key Flange 1 EURO flange B10 Pulse number 720 800 900 1000 1024 1200 1250 1440 1500 1800 2000 2048 2500 3000 3600 4000 4096 5000 Subject to modification in technic and design. Errors and omissions excepted. 300 360 400 500 512 600 Accessories Mounting accessories K 35 Spring washer coupling for solid shaft ø6...12 mm K 50 Spring washer coupling for solid shaft ø11...16 mm K 60 Spring washer coupling for solid shaft ø11...22 mm 2 www.baumer.com/motion 16/3/2015 100 120 150 200 250 256 Incremental encoders Solid shaft with EURO flange B10 100…5000 pulses per revolution EIL580 with EURO flange B10 Output signals Terminal assignment &ORFNZLVHURWDWLQJGLUHFWLRQZKHQORRNLQJDWIODQJH Flange connector M23, 12-pin / cable Pin Core color Assignment $ 1 pink B- 2 – – $ 3 blue R+ 4 red R- 5 green A+ 6 yellow A- 7 – – 8 grey B+ 9 – – 10 white GND 11 – – 12 brown UB % % 5 5 Screen: Connected to housing Cable data: PVC, [4x2x0.14 mm2], bending radius >32.5 mm, outer diameter 6.5 mm Trigger level Outputs TTL/RS422 Output level High ≥2.5 V 2 10 Output level Low ≤0.5 V 3 Load ≤20 mA Outputs HTL/Push-pull Output level High ≥UB -3 V Output level Low ≤1.5 V Load ≤20 mA 1 4 9 8 12 7 6 11 5 Assignment 1 GND 2 UB 3 A+ 4 A- 5 B+ 6 B- 7 R+ 8 R7 1 2 3 3 6 8 5 4 www.baumer.com/motion 16/3/2015 Pin Subject to modification in technic and design. Errors and omissions excepted. Flange connector M12, 8-pin Incremental encoders Solid shaft with EURO flange B10 100…5000 pulses per revolution EIL580 with EURO flange B10 Dimensions EURO flange B10, flange connector M12, radial ø0.07 A A 0.02 A 45±0.5 ø6.6 woodruff key DIN 6888 - 4x6.5 60 ø11h6 A 15 51.4 ø85g6 ° 0.05 30 32.5 11.8 M12x1 3 10 ø100 ø115-1 EURO flange B10, flange connector M23, radial ø0.07 A A 0.02 A 45±0.5 ø6.6 Subject to modification in technic and design. Errors and omissions excepted. A 30 32.5 3 10 14.4 M23x1 ø100 ø115-1 4 www.baumer.com/motion 16/3/2015 15 60 woodruff key DIN 6888 - 4x6.5 55.5 ø11h6 ø85g6 ° 0.05 Incremental encoders Solid shaft with EURO flange B10 100…5000 pulses per revolution EIL580 with EURO flange B10 Dimensions EURO flange B10, cable radial ø0.07 A A 0.02 A 45±0.5 ø6.6 60 woodruff key DIN 6888 - 4x6.5 A 15 30 ~52 32.5 3 11.8 ø100 ø115-1 Subject to modification in technic and design. Errors and omissions excepted. 10 5 www.baumer.com/motion 16/3/2015 ø11h6 ø85g6 ° 0.05