Teccor® brand Thyristors 8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs Lxx08xx & Qxx08xx & Qxx08xHx Series ® Description Sensitive type devices guarantee gate control in Quadrants I & IV needed for digital control circuitry. Standard type devices normally operate in Quadrants I & III triggered from AC line. Alternistor type devices only operate in quadrants I, II, & III and are used in circuits requiring high dv/dt capability. Agency Approval Agency Features & Benefits t3P)4DPNQMJBOU Agency File Number t(MBTToQBTTJWBUFE junctions -1BDLBHF& ® t7PMUBHFDBQBCJMJUZVQ to 1000 V Main Features Symbol IT(RMS) VDRM /VRRM IGT (Q1) Value Unit 8 A 400 to 1000 V 5 to 50 mA t4VSHFDBQBCJMJUZVQ to 100 A t&MFDUSJDBMMZJTPMBUFE “L-Package” is UL recognized for 2500Vrms t4PMJETUBUFTXJUDIJOH eliminates arcing or Schematic Symbol contact bounce that create voltage transients t/PDPOUBDUTUPXFBSPVU from reaction of switching events t3FTUSJDUFEPSMJNJUFE 3'* generation, depending on activation point of sine wave t3FRVJSFTPOMZBTNBMMHBUF activation pulse in each half-cycle Applications &YDFMMFOUGPS"$TXJUDIJOHBOEQIBTFDPOUSPMBQQMJDBUJPOT such as heating, lighting, and motor speed controls. MT2 MT1 Typical applications are AC solid-state switches, light dimmers, power tools, home/brown goods and white goods appliances. G Alternistor Triacs (no snubber required) are used in BQQMJDBUJPOTXJUIFYUSFNFMZJOEVDUJWFMPBETSFRVJSJOH highest commutation performance. Internally constructed isolated packages are offered for ease of heat sinking with highest isolation voltage. ©2010 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. 75 Revised: July 29, 2010 12:24 PM Lxx08xx & Qxx08xx & Qxx08xHx Series 8.0A TRIACs 8 Amp bi-directional solid state switch series is designed for AC switching and phase control applications such as motor speed and temperature modulation controls, lighting controls, and static switching relays. Teccor® brand Thyristors 8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs Absolute Maximum Ratings — Sensitive Triac (4 Quadrants) Symbol IT(RMS) Parameter RMS on-state current (full sine wave) ITSM /POSFQFUJUJWFTVSHFQFBLPOTUBUFDVSSFOU (full cycle, TJ initial = 25°C) I 2t I2t Value for fusing -YY-Z TC = 80°C -YY3Z-YY7Z-YY%Z TC = 85°C Value Unit 8 A G)[ t = 20 ms G)[ UNT 85 tpNT A A2s di/dt Critical rate of rise of on-state current IG = 50mA with 0.1μs rise time G)[ TJ = 110°C A/μs IGTM Peak gate trigger current tp c 10 μs TJ = 110°C A PG(AV) Average gate power dissipation TJ = 110°C 0.4 W Storage temperature range -40 to 150 °C Operating junction temperature range -40 to 110 °C Tstg TJ /PUFYYWPMUBHFZTFOTJUJWJUZ Absolute Maximum Ratings — Standard Triac Symbol IT(RMS) Parameter RMS on-state current (full sine wave) ITSM /POSFQFUJUJWFTVSHFQFBLPOTUBUFDVSSFOU (full cycle, TJ initial = 25°C) I2t I2t Value for fusing Value Unit 8 A 2YY3Z2YY/Z TC¡$ 2YY-Z TC¡$ G)[ t = 20 ms G)[ UNT 100 A 41 A2s TJ = 125°C A/μs TJ = 125°C 1.8 A TJ = 125°C 0.5 W Storage temperature range -40 to 150 °C Operating junction temperature range -40 to 125 °C di/dt Critical rate of rise of on-state current IG = 200mA with c 0.1μs rise time IGTM Peak gate trigger current PG(AV) Average gate power dissipation tpNT G)[ tp c 10 μs; IGT c TGTM Tstg TJ /PUFYYWPMUBHFZTFOTJUJWJUZ Lxx08xx & Qxx08xx & Qxx08xHx Series 76 Revised: July 29, 2010 12:24 PM ©2010 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor® brand Thyristors 8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs Symbol IT(RMS) Parameter RMS on-state current (full sine wave) 2YY-)Z TC¡$ 2YY3)Z2YY/)Z 2YY7)Z2YY%)Z TC¡$ G)[ ITSM t = 20 ms /POSFQFUJUJWFTVSHFQFBLPOTUBUFDVSSFOU (full cycle, TJ initial = 25°C) G)[ I2t di/dt I2t Value for fusing PG(AV) tP c 10 μs; IGT c IGTM Average gate power dissipation Unit 8 A 2YY7)Z 2YY%)Z 80 2YY-)Z 2YY3)Z 2YY/)Z 2YY7)Z 2YY%)Z 85 2YY-)Z 2YY3)Z 2YY/)Z 100 2YY7)Z 2YY%)Z A A2s 2YY-)Z 2YY3)Z 2YY/)Z 41 TJ = 125°C 2YY7)Z 2YY%)Z 2YY-)Z 2YY3)Z 2YY/)Z 2.0 IGT = 10mA 2YY7)Z 2YY%)Z 0.4 IGT N" 2YY-)Z 2YY3)Z 2YY/)Z G)[ Peak gate trigger current TJ = 125°C TJ = 125°C A/μs A W 0.5 Storage temperature range -40 to 150 °C Operating junction temperature range -40 to 125 °C Tstg TJ tpNT Critical rate of rise of on-state current IGTM UNT Value /PUFYYWPMUBHFZTFOTJUJWJUZ Electrical Characteristics (TJ = 25°C, unless otherwise specified) — Sensitive Triac (4 Quadrants) Symbol IGT Test Conditions VD = 12V RL8 VGT VGD VD = VDRM RLL8 TJ = 110°C I) IT = 100mA dv/dt VD = VDRM Gate Open TJ = 100°C (dv/dt)c EJEU D"NT5J = 110°C tgt IG = 100mA PW = 15μs IT"QL Quadrant Lxx08x6 Lxx08x8 Unit 5 10 10 20 mA *o**o*** IV MAX. ALL MAX. V ALL .*/ 0.2 V MAX. 400V 20 mA 40 20 TYP. 2 2 V/μs TYP. μs TYP. 7 10 V/μs /PUFYYWPMUBHFYQBDLBHFZTFOTJUJWJUZ ©2010 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. 77 Revised: July 29, 2010 12:24 PM Lxx08xx & Qxx08xx & Qxx08xHx Series 8.0A TRIACs Absolute Maximum Ratings — Alternistor (3 Quadrants) Teccor® brand Thyristors 8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs Electrical Characteristics (TJ = 25°C, unless otherwise specified) — Standard Triac Symbol IGT Test Conditions VD = 12V RL8 VGT VGD VD = VDRM RLL8 TJ = 125°C I) IT = 200mA Quadrant Qxx08x4 Qxx08x5 Unit 25 50 50 mA *o**o*** IV MAX. TYP. *o**o*** MAX. V ALL .*/ 0.2 V MAX. 50 400V dv/dt VD = VDRM Gate Open TJ = 125°C 50 mA 150 7 125 .*/ 800V V/μs 100 1000V 80 (dv/dt)c EJEU D"NT5J = 125°C TYP. 4 4 V/μs tgt IG = 100mA PW = 15μs IT"QL TYP. μs Qxx08xH3 Qxx08xH4 Unit 10 mA Electrical Characteristics (TJ = 25°C, unless otherwise specified) — Alternistor Triac (3 Quadrants) Symbol IGT Test Conditions VD = 12V RL8 VGT VGD VD = VDRM RLL8 TJ = 125°C I) IT = 100mA Quadrant *o**o*** MAX. *o**o*** MAX. V *o**o*** .*/ 0.2 V 2YY-)Z 2YY3)Z 2YY/)Z dv/dt 15 400V 400 7 50 MAX. .*/ VD = VDRM Gate Open TJ = 125°C 2YY7)Z 2YY%)Z 800V 200 1000V 100 mA V/μs 400V 450 7 50 800V 250 1000V 150 (dv/dt)c EJEU D"NT5J = 125°C .*/ 20 25 V/μs tgt IG = 100mA PW = 15μs IT"QL TYP. 4.0 4.0 μs /PUFYYWPMUBHFYQBDLBHFZTFOTJUJWJUZ Lxx08xx & Qxx08xx & Qxx08xHx Series 78 Revised: July 29, 2010 12:24 PM ©2010 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor® brand Thyristors 8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs Static Characteristics Test Conditions ITM"UpT VTM -YYYZ 2YYYZ IDRM VDRM = VRRM IRRM MAX. Unit V TJ = 25°C 7 20 μA TJ = 110°C 7 0.5 mA TJ = 25°C 400 - 1000V 50 μA TJ = 125°C 400 - 800V 2 TJ = 100°C 1000V mA MAX. 400 - 800V 10 1000V 20 TJ = 125°C 400 - 800V 2 TJ = 100°C 1000V TJ = 25°C 2YYY)Z Value 8.0A TRIACs Symbol μA mA Thermal Resistances Symbol Parameter Value Junction to case (AC) RR(J-C) Junction to ambient RR(J-A) -2YY3ZZ -2YY/ZZ 1.5 -2YY-ZZ 2.8 -2YY7ZZ 2.1 -2YY3ZZ 45 -2YY-ZZ 50 -2YY7ZZ Unit °C/W °C/W /PUFYYWPMUBHFYQBDLBHFZTFOTJUJWJUZZZUZQFTFOTJUJWJUZ Figure 2: Normalized DC Gate Trigger Current for All Quadrants vs. Junction Temperature Figure 1: Definition of Quadrants ALL POLARITIES ARE REFERENCED TO MT1 + (+) I GT GATE MT1 REF I GT MT2 (-) MT1 REF QII QI QIII QIV - 3.0 IGT I GT GATE 3.5 MT2 I GT GATE (+) IGT (TJ = 25°C) (-) MT2 POSITIVE (Positive Half Cycle) Ratio of MT2 + IGT MT2 2.5 2.0 1.5 1.0 0.5 I GT GATE 0.0 MT1 REF - MT2 NEGATIVE (Negative Half Cycle) -65 MT1 -40 -15 10 35 60 85 110 125 Junction Temperature (TJ)- ºC REF /PUF"MUFSOJTUPSTXJMMOPUPQFSBUFJO2*7 ©2010 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. 79 Revised: July 29, 2010 12:24 PM Lxx08xx & Qxx08xx & Qxx08xHx Series Teccor® brand Thyristors 8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs Figure 3: Normalized DC Holding Current vs. Junction Temperature Figure 4: Normalized DC Gate Trigger Voltage for All Quadrants vs. Junction Temperature 3.5 2.0 VGT 2.0 VGT (TJ = 25°C) 2.5 1.5 1.0 1.5 Ratio of IH Ratio of IH (TJ = 25°C) 3.0 1.0 0.5 0.5 0.0 0.0 -65 -40 -15 10 35 60 85 110 -65 125 -40 -15 Figure 5: Power Dissipation (Typical) vs. RMS On-State Current 35 60 85 110 125 Figure 6: Maximum Allowable Case Temperature vs. On-State Current (Sensitive Triac) 18 110 16 105 Lxx08Vy Lxx08Dy Lxx08Ry 100 14 Maximum Allowable Case Temperature (TC) - °C Average On-State Power Dissipation (PD(AV)) - Watts 10 Junction Temperature (TJ)- ºC Junction Temperature (TJ)- ºC 12 10 8 6 4 95 90 Lxx08Ly 85 80 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 360 CASE TEMPERATURE: Measured as shown on Dimensional Drawings 75 70 65 2 60 0 0 2 4 6 8 10 0 1 2 RMS On-State Current (IT(RMS)) - Amps 3 4 5 6 7 8 RMS On-State Current (IT(RMS)) - Amps Figure 7: Maximum Allowable Case Temperature vs. On-State Current (Standard / Alternistor Triac) Figure 8: On-State Current vs. On-State Voltage (Typical) 20 130 Maximum Allowable Case Temperature (TC) - °C Postitive or Negative Instantaneous On-State Current (iT) - Amps TC = 25°C Qxx08Ryy Qxx08Nyy Qxx08Vyy Qxx08Dyy 120 110 100 Qxx08Lyy 90 80 70 16 12 8 4 0 60 0 1 2 3 4 5 6 7 0.6 8 0.8 1.0 1.2 1.4 1.6 Postitive or Negative Instantaneous On-State Voltage (vT) - Volts RMS On-State Current (IT(RMS)) - Amps /PUFYYWPMUBHFYQBDLBHFZTFOTJUJWJUZZZUZQFTFOTJUJWJUZ Lxx08xx & Qxx08xx & Qxx08xHx Series 80 Revised: July 29, 2010 12:24 PM ©2010 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor® brand Thyristors 8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs Figure 9: Maximum Allowable Ambient Temperature vs. On-State Current CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 360 FREE AIR RATING - NO HEATSINK 100 80 L/Qxx08Lyy L/Qxx08Ryy 60 8.0A TRIACs Maximum Allowable Ambient Temperature (TA) - °C 120 L/Qxx08Vyy 40 20 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 RMS On-State Current (IT(RMS)) - Amps Figure 10: Surge Peak On-State Current vs. Number of Cycles 100 Peak Surge (Non-Repetitive) On-State Current (ITSM) - Amps L/Qxx08Ryy L/Qxx08Lyy L/Qxx08Nyy 4611-:'3&26&/$:)[4JOVTPJEBM LOAD: Resistive RMS On-State Current: [IT(RMS)>.BYJNVN3BUFE Value at Specified Case Temperature L/Qxx08Vyy L/Qxx08Dyy /PUFT 1. Gate control may be lost during and immediately following surge current interval. 2. Overload may not be repeated until junction temperature has returned to steady-state rated value. 10 1 1 10 100 1000 Surge Current Duration- Full Cycles /PUFYYWPMUBHFYQBDLBHFZTFOTJUJWJUZZZUZQFTFOTJUJWJUZ ©2010 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. 81 Revised: July 29, 2010 12:24 PM Lxx08xx & Qxx08xx & Qxx08xHx Series Teccor® brand Thyristors 8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs Soldering Parameters 1Co'SFFBTTFNCMZ - Temperature Min (Ts(min)) Pre Heat 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) oTFDT Average ramp up rate (Liquidus Temp) (TL) to peak ¡$TFDPOENBY TS(max) to TL - Ramp-up Rate ¡$TFDPOENBY Reflow - Temperature (TL) (Liquidus) ¡$ - Temperature (tL) oTFDPOET Ramp-up TL tL TS(max) Ramp-do Ramp-down Preheat TS(min) tS 25 Peak Temperature (TP) +0/-5 °C Time within 5°C of actual peak Temperature (tp) oTFDPOET Ramp-down Rate ¡$TFDPOENBY Time 25°C to peak Temperature (TP) NJOVUFT.BY Do not exceed 280°C time to peak temperature Physical Specifications Terminal Finish tP TP Temperature Reflow Condition Environmental Specifications Test .BUUF5JOQMBUFE Specifications and Conditions AC Blocking (VDRM) Body Material Terminal Material 6-SFDPHOJ[FEFQPYZNFFUJOHnBNNBCJMJUZ DMBTTJmDBUJPO7 Temperature Cycling Copper Alloy Temperature/ Humidity Design Considerations High Temp Storage Careful selection of the correct device for the application’s operating parameters and environment will go a long way UPXBSEFYUFOEJOHUIFPQFSBUJOHMJGFPGUIF5IZSJTUPS(PPE EFTJHOQSBDUJDFTIPVMEMJNJUUIFNBYJNVNDPOUJOVPVT DVSSFOUUISPVHIUIFNBJOUFSNJOBMTUPPGUIFEFWJDF rating. Other ways to ensure long life for a power discrete semiconductor are proper heat sinking and selection of voltage ratings for worst case conditions. Overheating, overvoltage (including dv/dt), and surge currents are the main killers of semiconductors. Correct mounting, soldering, and forming of the leads also help protect against component damage. Low-Temp Storage Lxx08xx & Qxx08xx & Qxx08xHx Series Time Thermal Shock Autoclave .*-45%.$POE""QQMJFE Peak AC voltage @ 125°C for 1008 hours .*-45%. 100 cycles; -40°C to +150°C; 15-min dwell-time &*"+&%&$+&4%" IPVST7%$¡$ rel humidity .*-45%. 1008 hours; 150°C 1008 hours; -40°C .*-45%. 10 cycles; 0°C to 100°C; 5-min dwellUJNFBUFBDIUFNQFSBUVSFTFDNBY transfer time between temperature &*"+&%&$+&4%" IPVST¡$BU"5.T BOE 3) Resistance to Solder Heat .*-45%.FUIPE Solderability "/4*+45%DBUFHPSZ5FTU" Lead Bend .*-45%.$POE& 82 Revised: July 29, 2010 12:24 PM ©2010 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor® brand Thyristors 8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs Dimensions — TO-220AB (R-Package) — Non-Isolated Mounting Tab Common with Center Lead O A E Dimension 8.13 .320 P MT2 B C 13.36 .526 D 7.01 .276 NOTCH IN GATE LEAD TO ID. NON-ISOLATED TAB F R G Inches Millimeters Min Max Min Max A 0.420 B 0.105 0.115 C 0.250 5.84 D & 0.142 ' 0.110 G 0.540 ) 0.025 L H K N J /PUF.BYJNVNUPSRVFUP be applied to mounting tab JTJOMCT/N M MT1 MT2 GATE J 0.205 5.21 K 0.105 2.41 L 1.52 M 0.085 2.41 / 0.018 0.024 O 0.188 4.52 P 0.045 1.14 1.52 R 0.048 1.22 Min Max Min Max A 0.420 B 0.105 0.115 Dimensions — TO-220AB (L-Package) — Isolated Mounting Tab AREA (REF.) 0.17 IN2 TC MEASURING POINT O A E Dimension 8.13 .320 P B C 13.36 .526 D 7.01 .276 F R G Inches Millimeters C 0.250 5.84 D & 0.142 ' 0.110 G 0.540 ) 0.025 L H K N J MT1 MT2 GATE M /PUF.BYJNVNUPSRVFUP be applied to mounting tab JTJOMCT/N ©2010 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. J 0.205 5.21 K 0.105 2.41 L 1.52 M 0.085 2.41 / 0.018 0.024 O 0.188 4.52 P 0.045 1.14 1.52 R 0.048 1.22 83 Revised: July 29, 2010 12:24 PM Lxx08xx & Qxx08xx & Qxx08xHx Series 8.0A TRIACs AREA (REF.) 0.17 IN2 TC MEASURING POINT Teccor® brand Thyristors 8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs Dimensions — TO-263AB (N-Package) — D2-PAK Surface Mount TC MEASURING POINT Inches AREA: 0.11 IN2 B C V Dimension E MT2 7.01 .276 A 8.41 .331 S W U J K GATE MT1 8.13 .320 G H D F 11.68 .460 2.16 .085 7.01 .276 7.01 .276 16.89 .665 8.89 .350 1.40 .055 3.81 .150 Millimeters Min .BY .BY A B 0.420 Min C 0.188 4.52 D 0.025 & 0.045 1.14 1.52 ' 1.52 G 0.105 2.41 ) 0.102 J 0.018 0.024 K 0.110 S 15.88 V 0.045 1.14 U 0.002 0.010 0.05 0.25 W 0.040 1.02 2.03 .080 6.60 .260 Dimensions — TO-251AA (V-Package) — V-PAK Through Hole TC MEASURING POINT AREA: 0.040 IN2 Dimension MT2 E H D 5.28 .208 J A 5.34 .210 B R P Q S K C MT1 MT2 GATE F L G I Lxx08xx & Qxx08xx & Qxx08xHx Series Inches Millimeters Min Typ Max Min Typ Max A 0.040 0.044 0.050 1.02 1.11 B 0.242 0.245 C D 0.205 0.208 5.21 5.41 & 0.255 ' 0.80 0.84 G 2.21 2.28 ) 0.085 2.41 I 0.180 0.184 J 0.018 0.020 0.51 0.58 K 0.040 0.044 1.01 1.12 L 0.018 0.020 0.52 0.58 P 0.042 0.052 1.20 Q 0.044 1.00 1.11 R 0.044 1.00 1.11 S 0.084 2.00 2.11 84 Revised: July 29, 2010 12:24 PM ©2010 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor® brand Thyristors 8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs Dimensions — TO-252AA (D-Package) — D-PAK Surface Mount MT2 E D 6.71 .264 5.28 .208 TC MEASURING POINT Dimension Inches Millimeters Min Typ Max Min Typ Max A 0.040 0.050 1.02 B 0.245 C 0.108 D 0.205 0.208 5.21 5.41 & 0.255 6.71 .264 5.34 .210 B 1.60 .063 P Q C 1.80 .071 GATE F MT1 MT2 AREA : 0.040 IN2 3 .118 G 4.60 .181 I O L K J H M N ©2010 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. 85 Revised: July 29, 2010 12:24 PM ' 0.80 0.84 G 2.21 2.28 ) 0.085 2.41 I 0.184 4.55 J 0.018 0.020 0.51 0.58 K 0.040 0.044 1.02 1.12 L 0.018 0.020 0.51 0.58 M 0.000 0.000 0.004 0.00 0.00 0.10 / 0.021 O 0° 0° 5° 0° 0° 5° P 0.042 0.052 1.20 Q 0.044 1.00 1.11 Lxx08xx & Qxx08xx & Qxx08xHx Series 8.0A TRIACs A Teccor® brand Thyristors 8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs Product Selector Voltage (xx) Gate Sensitivity Quadrants Part Number Type Package 10 mA Sensitive Triac TO-220L 5 mA 10 mA Sensitive Triac TO-252 D-PAK X 5mA 10mA Sensitive Triac TO-220R X X 5 mA 10 mA Sensitive Triac TO-251 V-PAK -YY- X X 10 mA 20 mA Sensitive Triac TO-220L -YY% X X 10 mA 20 mA Sensitive Triac TO-252 D-PAK -YY3 X X 10mA 20mA Sensitive Triac TO-220R -YY7 X X 10 mA 20 mA Sensitive Triac TO-251 V-PAK 2YY3) X X 10 mA Alternistor Triac TO-220R 2YY7) X X 10 mA Alternistor Triac TO-251 V-PAK 2YY%) X X 10 mA Alternistor Triac TO-252 D-PAK 2YY/) X X 10 mA Alternistor Triac 50%2-PAK 2YY- X 25 mA Triac TO-220L 2YY3 X 25 mA Triac TO-220R 2YY/ X 25 mA Triac 50%¤1", 2YY-) X X X X N" Alternistor Triac TO-220L 2YY3) X X X X N" Alternistor Triac TO-220R 2YY7) X X X X N" Alternistor Triac TO-251 V-PAK 2YY%) X X X X N" Alternistor Triac TO-252 D-PAK 2YY/) X X X X N" Alternistor Triac 50%¤1", 2YY- X X X 50 mA Triac TO-220L 2YY3 X X X 50 mA Triac TO-220R 2YY/ X X X 50 mA Triac 50%¤1", 400V 600V -YY- X -YY% 800V 1000V I – II – III IV X 5 mA X X -YY3 X -YY7 Packing Options Part Number Marking Weight Packing Mode Base Quantity -2YY-3ZZ -2YY-3ZZ 2.2 g Bulk 500 -2YY-3ZZ51 -2YY-3ZZ 2.2 g Tube Pack 500 (50 per tube) 2YY/ZZ51 2YY/ZZ H Tube 500 (50 per tube) 2YY/ZZ31 2YY/ZZ H &NCPTTFE$BSSJFS 500 -2YY%ZZ51 -2YY%ZZ H Tube QFSUVCF -2YY%ZZ31 -2YY%ZZ H &NCPTTFE$BSSJFS 2500 -2YY7ZZ51 -2YY7ZZ 0.4 g Tube QFSUVCF /PUFYYWPMUBHFYQBDLBHFZTFOTJUJWJUZZZUZQFTFOTJUJWJUZ Lxx08xx & Qxx08xx & Qxx08xHx Series 86 Revised: July 29, 2010 12:24 PM ©2010 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Teccor® brand Thyristors 8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs TO-252 Embossed Carrier Reel Pack (RP) Specifications Meets all EIA-481-2 Standards 0.059 Dia (1.5) * Cover tape 0.315 (8.0) XXXXXX DC MT1 XX XXXXXX DC XX XXXXXX * DC 0.524 (13.3) XX 0.63 (16.0) XXXXXX Gate 8.0A TRIACs 0.157 (4.0) MT2 12.99 (330.0) 0.512 (13.0) Arbor Hole Dia. Dimensions are in inches (and millimeters). 0.64 (16.3) Direction of Feed TO-263 Embossed Carrier Reel Pack (RP) Specifications Meets all EIA-481-2 Standards 0.63 (16.0) 0.157 (4.0) Gate 0.059 DIA (1.5) MT1 0.945 (24.0) 0.827 (21.0) * * Cover tape MT2 0.512 (13.0) Arbor Hole Dia. 12.99 (330.0) Dimensions are in inches (and millimeters). 1.01 (25.7) Direction of Feed ©2010 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. 87 Revised: July 29, 2010 12:24 PM Lxx08xx & Qxx08xx & Qxx08xHx Series Teccor® brand Thyristors 8 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs Part Numbering System Part Marking System Q 60 08 L 5 56 L6008V5 CURRENT 08: 8A SENSITIVITY & TYPE Sensitive Triac: 6 : 5 mA (QI, II, III) 10 mA (QIV) 8 : 10 mA (QI, II, III) 20 mA (QIV) Standard Triac: 4 : 25 mA (QI, II, III) 5 : 50 mA (QI, II, III) Alternistor Triac: H3 : 10 mA (QI, II, III) H4 : 35 mA (QI, II, III) yxxxx VOLTAGE RATING 40 : 400V 60 : 600V 80 : 800V K0 : 1000V LEAD FORM DIMENSIONS xx : Lead Form Option ® DEVICE TYPE L : Sensitive Triac Q : Triac or Alternistor TO-252AA – (D Package) TO-251AA – (V Package) ® PACKAGE TYPE L : TO-220 Isolated R : TO-220 Non-Isolated N : TO-263 (D2PAK) V : TO-251 (VPAK) D : TO-252 (DPAK) Lxx08xx & Qxx08xx & Qxx08xHx Series 88 Revised: July 29, 2010 12:24 PM ©2010 Littelfuse, Inc Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information.