Datasheet

Teccor® brand Thyristors
6 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs
Lxx06xx & Qxx06xx & Qxx06xHx Series
RoHS
Description
6 Amp bi-directional solid state switch series is designed
for AC switching and phase control applications such as
motor speed and temperature modulation controls, lighting
controls, and static switching relays.
Sensitive type devices guarantee gate control in
Quadrants I & IV needed for digital control circuitry.
Standard type devices normally operate in Quadrants I &
III triggered from AC line.
Alternistor type devices only operate in quadrants I, II, &
III and are used in circuits requiring high dv/dt capability.
Features & Benefits
• RoHS compliant
Agency Approval
Agency
contact bounce that
create voltage transients
• Glass – passivated
junctions
Agency File Number
• Voltage capability up
to 1000 V
L Package: E71639
• Surge capability up
to 85 A
Main Features
Symbol
IT(RMS)
VDRM /VRRM
IGT (Q1)
Value
Unit
6
A
400 to 1000
V
5 to 50
mA
• Electrically isolated
“L - Package” is UL
Recognized for 2500Vrms
• Solid-state switching
eliminates arcing or
•N
o contacts to wear out
from reaction of switching
events
•R
estricted (or limited) RFI
generation, depending on
activation point of
sine wave
•R
equires only a small gate
activation pulse in each
half-cycle
Applications
Excellent for AC switching and phase control applications
such as heating, lighting, and motor speed controls.
Schematic Symbol
Typical applications are AC solid-state switches, light
dimmers, power tools, home/brown goods and white
goods appliances.
MT2
Alternistor Triacs (no snubber required) are used in
applications with extremely inductive loads requiring
highest commutation performance.
MT1
Internally constructed isolated packages are offered for
ease of heat sinking with highest isolation voltage.
G
Absolute Maximum Ratings — Sensitive Triac (4 Quadrants)
Symbol
IT(RMS)
ITSM
I 2t
Parameter
RMS on-state current (full sine wave)
Non repetitive surge peak on-state current
(full cycle, TJ initial = 25°C)
IGTM
I2t Value for fusing
Critical rate of rise of on-state current
IG = 50mA with 0.1µs rise time
Peak gate trigger current
PG(AV)
Average gate power dissipation
di/dt
Tstg
TJ
Storage temperature range
Operating junction temperature range
Note: xx = voltage, y = sensitivity
© 2016 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 05/04/16
Lxx06Ly/Lxx06Vy/Lxx06Dy
Lxx06Ry/Lxx06Ny
f = 50 Hz
f = 60 Hz
tp = 8.3 ms
TC = 80°C
TC = 85°C
t = 20 ms
t = 16.7 ms
Value
Unit
6
A
50
60
15
A2s
70
A/μs
A
f = 120 Hz
TJ = 110°C
tp ≤ 10 μs
TJ = 110°C
1.6
A
TJ = 110°C
0.4
W
-40 to 150
-40 to 110
°C
°C
Teccor® brand Thyristors
6 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs
Absolute Maximum Ratings — Standard Triac
Symbol
IT(RMS)
Parameter
RMS on-state current (full sine wave)
ITSM
Non repetitive surge peak on-state current
(full cycle, TJ initial = 25°C)
I2t
I2t Value for fusing
Value
Unit
6
A
Qxx06Ry / Qxx06Ny
TC = 95°C
Qxx06Ly
TC = 90°C
f = 50 Hz
t = 20 ms
65
f = 60 Hz
t = 16.7 ms
80
tp = 8.3 ms
A
26.5
A2s
di/dt
Critical rate of rise of on-state current
IG = 200mA with 0.1µs rise time
f = 120 Hz
TJ = 125°C
70
A/μs
IGTM
Peak gate trigger current
tp ≤ 10 μs; IGT ≤ IGTM
TJ = 125°C
1.6
A
PG(AV)
Average gate power dissipation
TJ = 125°C
0.5
W
Storage temperature range
-40 to 150
°C
Operating junction temperature range
-40 to 125
°C
Tstg
TJ
Note: xx = voltage, y = sensitivity
Absolute Maximum Ratings — Alternistor Triac (3 Quadrants)
Symbol
IT(RMS)
Parameter
RMS on-state current (full sine wave)
Qxx06LHy/Qxx06VHy/
Qxx06DHy
TC = 95°C
Qxx06RHy/Qxx06NHy
TC = 100°C
f = 50 Hz
t = 20 ms
Non repetitive surge peak on-state current
(full cycle, TJ initial = 25°C)
ITSM
f = 60 Hz
I2t
I2t Value for fusing
t = 16.7 ms
tp = 8.3 ms
Qxx06VHy
Qxx06DHy
Qxx06LHy
Qxx06RHy
Qxx06NHy
Qxx06VHy
Qxx06DHy
Qxx06LHy
Qxx06RHy
Qxx06NHy
Qxx06VHy
Qxx06DHy
Qxx06LHy
Qxx06RHy
Qxx06NHy
Value
Unit
6
A
55
80
A
65
85
17.5
A 2s
30
di/dt
Critical rate of rise of on-state current
f = 120 Hz
TJ = 125°C
70
A/μs
IGTM
Peak gate trigger current
tp ≤ 10 μs; IGT ≤ IGTM
TJ = 125°C
1.6
A
PG(AV)
Average gate power dissipation
TJ = 125°C
0.5
W
Storage temperature range
-40 to 150
°C
Operating junction temperature range
-40 to 125
°C
Tstg
TJ
Note: xx = voltage, y = sensitivity
Additional Information
Datasheet
Resources
Samples
© 2016 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 05/04/16
Teccor® brand Thyristors
6 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs
Electrical Characteristics (TJ = 25°C, unless otherwise specified) — Sensitive Triac (4 Quadrants)
Symbol
Test Conditions
Value
Quadrant
Lxx06x5
Lxx06x6
Lxx06x8
5
5
5
10
10
20
Unit
IGT
VD = 12V RL = 60 Ω
I – II – III
IV
MAX.
VGT
VD = 12V RL = 60 Ω
ALL
MAX.
1.3
V
VGD
VD = VDRM RL = 3.3 kΩ TJ = 110°C
ALL
MIN.
0.2
V
IH
IT = 100mA
mA
MAX.
10
10
20
mA
TYP.
30
20
30
20
40
30
V/μs
400V
600V
dv/dt
VD = VDRM Gate Open TJ = 100°C
(dv/dt)c
(di/dt)c = 3.2 A/ms TJ = 110°C
TYP.
1
2
2
V/μs
tgt
IG = 2 x IGT PW = 15µs IT = 8.5 A(pk)
TYP.
3.0
3.0
3.2
μs
Electrical Characteristics (TJ = 25°C, unless otherwise specified) — Standard Triac
Symbol
IGT
VGT
Test Conditions
VD = 12V RL = 60 Ω
VD = 12V RL = 60 Ω
VGD
VD = VDRM RL = 3.3 kΩ TJ = 125°C
IH
IT = 200mA
Value
Quadrant
Qxx06x4
25
50
VD = VDRM Gate Open TJ = 125°C
MAX.
TYP.
I – II – III
MAX.
1.3
V
ALL
MIN.
0.2
V
MAX.
50
50
mA
mA
120
600V
100
MIN.
800V
VD = VDRM Gate Open TJ = 100°C
Unit
I – II – III
IV
400V
dv/dt
Qxx06x5
50
75
V/μs
85
1000V
100
(dv/dt)c
(di/dt)c = 3.2 A/ms TJ = 125°C
TYP.
4
4
V/μs
tgt
IG = 2 x IGT PW = 15µs IT = 8.5 A(pk)
TYP.
3.0
3.0
μs
Electrical Characteristics (TJ = 25°C, unless otherwise specified) — Alternistor Triac (3 Quadrants)
Symbol
IGT
VGT
Test Conditions
VD = 12V RL = 60 Ω
VD = 12V RL = 60 Ω
VGD
VD = VDRM RL = 3.3 kΩ TJ = 125°C
IH
IT = 100mA
MAX.
I – II – III
MAX.
1.3
V
I – II – III
MIN.
0.2
V
MAX.
15
Qxx06LHy /
Qxx06RHy /
Qxx06NHy
MIN.
ALL
35
35
400V
75
400
600V
50
300
800V
VD = VDRM Gate Open TJ = 125°C
VD = VDRM Gate Open TJ = 100°C
10
Unit
I – II – III
Qxx06VHy /
Qxx06DHy
dv/dt
Value
Qxx06xH3
Qxx06xH4
Quadrant
mA
mA
200
400V
75
450
600V
50
350
800V
250
1000V
150
V/μs
(dv/dt)c
(di/dt)c = 3.2 A/ms TJ = 125°C
MIN.
20
25
V/μs
tgt
IG = 2 x IGT PW = 15µs IT = 8.5 A(pk)
TYP.
4.0
4.0
μs
Note: xx = voltage, x = package, y = sensitivity
© 2016 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 05/04/16
Teccor® brand Thyristors
6 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs
Static Characteristics
Symbol
Test Conditions
ITM = 11.3A tp = 380 µs
VTM
Lxx06xy
Qxx06xy
IDRM / IRRM
VDRM = VRRM
Unit
1.60
V
TJ = 25°C
400 - 600V
20
μA
TJ = 110°C
400 - 600V
0.5
mA
TJ = 25°C
400 - 1000V
50
μA
TJ = 125°C
400 - 800V
2
TJ = 100°C
1000V
MAX.
mA
3
400 - 800V
10
1000V
20
TJ = 125°C
400 - 800V
3
TJ = 100°C
1000V
2
TJ = 25°C
Qxx06xHy
MAX.
Value
μA
mA
Thermal Resistances
Symbol
Parameter
Junction to case (AC)
Rθ(J-C)
Junction to ambient
Rθ(J-A)
Value
L/Qxx06Ryy / L/Qxx06Nyy
1.8
L/Qxx06Lyy
3.3
L/Qxx06Vyy / L/Qxx06Dyy
3.2
L/Qxx06Ryy
45
L/Qxx06Lyy
50
L/Qxx06Vyy
70
Unit
°C/W
°C/W
Note: xx = voltage, x = package, y = sensitivity, yy = type & sensitivity
Figure 2: N
ormalized DC Gate Trigger Current for
All Quadrants vs. Junction Temperature
Figure 1: Definition of Quadrants
ALL POLARITIES ARE REFERENCED TO MT1
+
(+)
I GT
GATE
MT1
I GT
REF
(-)
MT1
I GT
GATE
(+)
MT1
REF
REF
QII QI
QIII QIV
MT2
IGT
I GT
GATE
4.0
MT2
-
+ IGT
MT2
IGT (TJ = 25°C)
(-)
MT2 POSITIVE
(Positive Half Cycle)
Ratio of
MT2
3.0
2.0
1.0
I GT
GATE
MT2 NEGATIVE
(Negative Half Cycle)
MT1
REF
0.0
-65
-40
-15
10
35
60
85
110
125
Junction Temperature (TJ)- °C
NOTE: Alternistors will not operate in QIV
Note: Alternistors will not operate in QIV
© 2016 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 05/04/16
Teccor® brand Thyristors
6 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs
Figure 3: Normalized DC Holding Current
vs. Junction Temperature
Figure 4: N
ormalized DC Gate Trigger Voltage for
All Quadrants vs. Junction Temperature
VGT
IH (TJ = 25°C)
1.5
1.0
Ratio of
2.0
VGT (TJ = 25°C)
2.0
3.0
Ratio of
IH
4.0
1.0
0.5
0.0
0.0
-65
-40
-15
10
35
60
85
110
-65
125
-40
Junction Temperature (TJ)- °C
35
60
85
110
125
Figure 6: M
aximum Allowable Case Temperature
vs. On-State Current (Sensitive Triac)
120
Maximum Allowable Case Temperature
(TC) - °C
18
Average On-State Power Dissipation
(PD(AV)) - Watts
10
Junction Temperature (TJ)- ºC
Figure 5: Power Dissipation (Typical)
vs. RMS On-State Current
16
14
110
Lxx06Ry
100
12
10
8
6
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 360°
4
2
0
0
2
4
6
8
10
12
14
16
90
Lxx06Ly
Lxx06Vy
Lxx06Dy
80
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 360°
CASE TEMPERATURE: Measured as shown
on Dimensional Drawings
70
60
0
1
RMS On-State Current (IT(RMS)) - Amps
2
3
4
5
6
7
RMS On-State Current (IT(RMS)) - Amps
Figure 7: Maximum Allowable Case Temperature
vs. On-State Current (Standard Triac)
Figure 8: M
aximum Allowable Case Temperature
vs. On-State Current (Alternistor Triac)
130
Maximum Allowable Case Temperature
(TC) - °C
130
Maximum Allowable Case Temperature
(TC) - °C
-40
120
Qxx06Ry
Qxx06Ny
110
100
Qxx06Ly
90
80
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 360°
CASE TEMPERATURE: Measured as shown
on Dimensional Drawings
70
120
Qxx06RHy
Qxx06NHy
110
100
Qxx06LHy
Qxx06VHy
Qxx06DHy
90
80
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 360°
CASE TEMPERATURE: Measured as shown
on Dimensional Drawings
70
60
60
0
1
2
3
4
5
RMS On-State Current (IT(RMS)) - Amps
© 2016 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 05/04/16
6
7
0
1
2
3
4
5
RMS On-State Current (IT(RMS)) - Amps
6
7
Teccor® brand Thyristors
6 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs
Figure 9: Maximum Allowable Ambient Temperature
vs. On-State Current (Sensitive / Standard Triac)
Figure 10: Maximum Allowable Ambient Temperature
vs. On-State Current (Alternistor Triac)
120
Maximum Allowable
Ambient Temperature (TA) - °C
Maximum Allowable
Ambient Temperature (TA) - °C
120
100
Lxx06Ly
Lxx06Ry
80
Qxx06Ly
Qxx06Ry
Qxx06Ny
L/Qxx06Vy
60
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 360°
FREE AIR RATING – NO HEATSINK
40
20
100
Qxx06LHy
Qxx06RHy
Qxx06NHy
80
Qxx06VHy
60
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 360°
CASE TEMPERATURE: Measured as shown
on Dimensional Drawing
40
20
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
RMS On-State Current (IT(RMS)) - Amps
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
RMS On-State Current [IT(RMS)] - Amps
Figure 11: On-State Current vs. On-State Voltage
(Typical)
Postitive or Negative Instantaneous
On-State Current (iT) - Amps
20
TC = 25°C
18
16
14
12
10
8
6
4
2
0
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
Postitive or Negative Instantaneous
On-State Voltage (vT) - Volts
© 2016 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 05/04/16
Teccor® brand Thyristors
6 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs
Figure 12: Surge Peak On-State Current vs. Number of Cycles (Sensitive / Standard Triac)
100
SUPPLY FREQUENCY: 60 Hz Sinusoidal
LOAD: Resistive
RMS On-State Current: [IT(RMS)]: Maximum Rated
Value at Specified Case Temperature
Peak Surge (Non-Repetitive)
On-State Current (ITSM) - Amps
Qxx06Ly
Qxx06Ry
Qxx06Ny
Notes:
1. G
ate control may be lost during and immediately
following surge current interval.
2. O
verload may not be repeated until junction
temperature has returned to steady-state
rated value.
Lxx06Ly
Lxx06Ry
Lxx06Vy
Lxx06Dy
10
1
1
10
100
1000
Surge Current Duration- Full Cycles
Figure 13: Surge Peak On-State Current vs. Number of Cycles (Alternistor Triac)
100
SUPPLY FREQUENCY: 60 Hz Sinusoidal
LOAD: Resistive
RMS On-State Current: [IT(RMS)]: Maximum Rated
Value at Specified Case Temperature
Peak Surge (Non-Repetitive)
On-State Current (ITSM) - Amps
Qxx06LHy
Qxx06RHy
Qxx06NHy
Notes:
1. G
ate control may be lost during and immediately
following surge current interval.
2. O
verload may not be repeated until junction
temperature has returned to steady-state
rated value.
Qxx06VHy
Qxx06DHy
10
1
1
10
100
Surge Current Duration- Full Cycles
Note: xx = voltage, x = package, y = sensitivity, yy = type & sensitivity
© 2016 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 05/04/16
1000
Teccor® brand Thyristors
6 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs
Soldering Parameters
Pb – Free assembly
Pre Heat
- Temperature Min (Ts(min))
150°C
- Temperature Max (Ts(max))
200°C
- Time (min to max) (ts)
60 – 180 secs
Average ramp up rate (Liquidus Temp)
(TL) to peak
5°C/second max
TS(max) to TL - Ramp-up Rate
5°C/second max
Reflow
- Temperature (TL) (Liquidus)
217°C
- Temperature (tL)
60 – 150 seconds
Peak Temperature (TP)
260+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)
20 – 40 seconds
Ramp-down Rate
5°C/second max
Time 25°C to peak Temperature (TP)
8 minutes Max.
Do not exceed
280°C
Physical Specifications
Terminal Finish
100% Matte Tin-plated
Body Material
UL recognized epoxy meeting flammability
classification 94V-0
Terminal Material
Copper Alloy
tP
TP
Temperature
Reflow Condition
Ramp-up
TL
tL
TS(max)
Preheat
TS(min)
25
Ramp-do
Ramp-down
tS
time to peak temperature
Time
Environmental Specifications
Test
AC Blocking (VDRM)
Temperature Cycling
Temperature/
Humidity
Specifications and Conditions
MIL-STD-750, M-1040, Cond A Applied
Peak AC voltage @ 125°C for 1008 hours
MIL-STD-750, M-1051,
100 cycles; -40°C to +150°C; 15-min
dwell-time
EIA / JEDEC, JESD22-A101
1008 hours; 320V - DC: 85°C; 85%
rel humidity
MIL-STD-750, M-1031,
1008 hours; 150°C
Design Considerations
High Temp Storage
Careful selection of the correct device for the application’s
operating parameters and environment will go a long way
toward extending the operating life of the Thyristor. Good
design practice should limit the maximum continuous
current through the main terminals to 75% of the device
rating. Other ways to ensure long life for a power discrete
semiconductor are proper heat sinking and selection of
voltage ratings for worst case conditions. Overheating,
overvoltage (including dv/dt), and surge currents are
the main killers of semiconductors. Correct mounting,
soldering, and forming of the leads also help protect
against component damage.
Low-Temp Storage
1008 hours; -40°C
Resistance to
Solder Heat
MIL-STD-750 Method 2031
Solderability
ANSI/J-STD-002, category 3, Test A
Lead Bend
MIL-STD-750, M-2036 Cond E
© 2016 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 05/04/16
Teccor® brand Thyristors
6 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs
Dimensions — TO-220AB (R-Package) — Non-Isolated Mounting Tab Common with Center Lead
TC MEASURING POINT
O
A
Ø E
AREA (REF.) 0.17 IN2
Dimension
8.13
.320
P
MT2
B
C
13.36
.526
D
7.01
.276
NOTCH IN
GATE LEAD
TO ID.
NON-ISOLATED
TAB
F
R
G
L
H
N
K
J
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs, (0.904 Nm).
M
MT1 MT2 GATE
Inches
Millimeters
Min
Max
Min
Max
A
0.380
0.420
9.65
10.67
B
0.105
0.115
2.67
2.92
C
0.230
0.250
5.84
6.35
D
0.590
0.620
14.99
15.75
E
0.142
0.147
3.61
3.73
F
0.110
0.130
2.79
3.30
G
0.540
0.575
13.72
14.61
H
0.025
0.035
0.64
0.89
J
0.195
0.205
4.95
5.21
K
0.095
0.105
2.41
2.67
L
0.060
0.075
1.52
1.91
M
0.085
0.095
2.16
2.41
N
0.018
0.024
0.46
0.61
O
0.178
0.188
4.52
4.78
P
0.045
0.060
1.14
1.52
R
0.038
0.048
0.97
1.22
Dimensions — TO-220AB (L-Package) — Isolated Mounting Tab
TC MEASURING POINT
O
A
Ø E
P
AREA (REF.) 0.17 IN2
Dimension
8.13
.320
A
B
C
13.36
.526
D
7.01
.276
F
R
G
L
H
K
N
J
M
MT1 MT2 GATE
© 2016 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 05/04/16
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs, (0.904 Nm).
Inches
Millimeters
Min
Max
Min
Max
0.380
0.420
9.65
10.67
B
0.105
0.115
2.67
2.92
C
0.230
0.250
5.84
6.35
D
0.590
0.620
14.99
15.75
E
0.142
0.147
3.61
3.73
F
0.110
0.130
2.79
3.30
G
0.540
0.575
13.72
14.61
H
0.025
0.035
0.64
0.89
J
0.195
0.205
4.95
5.21
K
0.095
0.105
2.41
2.67
L
0.060
0.075
1.52
1.91
M
0.085
0.095
2.16
2.41
N
0.018
0.024
0.46
0.61
O
0.178
0.188
4.52
4.78
P
0.045
0.060
1.14
1.52
R
0.038
0.048
0.97
1.22
Teccor® brand Thyristors
6 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs
Dimensions — TO-263AB (N-Package) — D2-PAK Surface Mount
TC MEASURING POINT
B
Dimension
AREA: 0.11 IN2
C
V
MT2
7.01
.276
A
8.41
.331
S
W
U
MT1
G
J
K
GATE
8.13
.320
H
D
F
11.68
.460
2.16
.085
7.01
.276
7.01
.276
16.89
.665
8.89
.350
1.40
.055
3.81
.150
2.03
.080
Inches
Millimeters
Min
Max
Min
Max
A
0.360
0.370
9.14
9.40
B
0.380
0.420
9.65
10.67
C
0.178
0.188
4.52
4.78
D
0.025
0.035
0.64
0.89
E
0.045
0.060
1.14
1.52
E
F
0.060
0.075
1.52
1.91
G
0.095
0.105
2.41
2.67
H
0.092
0.102
2.34
2.59
J
0.018
0.024
0.46
0.61
K
0.090
0.110
2.29
2.79
S
0.590
0.625
14.99
15.88
V
0.035
0.045
0.89
1.14
U
0.002
0.010
0.05
0.25
W
0.040
0.070
1.02
1.78
6.60
.260
Dimensions — TO-251AA (V-Package) — V-PAK Through Hole
TC MEASURING POINT
MT2
E
H
D
AREA: 0.040 IN2
Dimension
5.28
.208
J
A
5.34
.210
B
R
P
Q
S
K
C
MT1
MT2
GATE
F
G
I
L
Inches
Min
Typ
Millimeters
Max
Min
Typ
Max
A
0.037
0.040
0.043
0.94
1.01
1.09
B
0.235
0.242
0.245
5.97
6.15
6.22
C
0.350
0.361
0.375
8.89
9.18
9.53
D
0.205
0.208
0.213
5.21
5.29
5.41
E
0.255
0.262
0.265
6.48
6.66
6.73
F
0.027
0.031
0.033
0.69
0.80
0.84
G
0.087
0.090
0.093
2.21
2.28
2.36
H
0.085
0.092
0.095
2.16
2.34
2.41
I
0.176
0.180
0.184
4.47
4.57
4.67
J
0.018
0.020
0.023
0.46
0.51
0.58
K
0.035
0.037
0.039
0.90
0.95
1.00
L
0.018
0.020
0.023
0.46
0.52
0.58
P
0.042
0.047
0.052
1.06
1.20
1.32
Q
0.034
0.039
0.044
0.86
1.00
1.11
R
0.034
0.039
0.044
0.86
1.00
1.11
S
0.074
0.079
0.084
1.86
2.00
2.11
© 2016 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 05/04/16
Teccor® brand Thyristors
6 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs
Dimensions — TO-252AA (D-Package) — D-PAK Surface mount
MT2
E
D
6.71
.264
5.28
.208
TC MEASURING POINT
Dimension
A
6.71
.264
5.34
.210
B
C
P
Q
MT1
GATE
F
MT2
1.60
.063
1.80
.071
AREA : 0.040 IN2
3
.118
G
I
O L
K
M
N
© 2016 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 05/04/16
J
H
4.60
.181
Inches
Min
Typ
Millimeters
Max
Min
Typ
Max
A
0.037
0.040
0.043
0.94
1.01
1.09
B
0.235
0.243
0.245
5.97
6.16
6.22
C
0.106
0.108
0.113
2.69
2.74
2.87
D
0.205
0.208
0.213
5.21
5.29
5.41
E
0.255
0.262
0.265
6.48
6.65
6.73
F
0.027
0.031
0.033
0.69
0.80
0.84
G
0.087
0.090
0.093
2.21
2.28
2.36
H
0.085
0.092
0.095
2.16
2.33
2.41
I
0.176
0.179
0.184
4.47
4.55
4.67
J
0.018
0.020
0.023
0.46
0.51
0.58
K
0.035
0.037
0.039
0.90
0.95
1.00
L
0.018
0.020
0.023
0.46
0.51
0.58
M
0.000
0.000
0.004
0.00
0.00
0.10
N
0.021
0.026
0.027
0.53
0.67
0.69
O
0°
0°
5°
0°
0°
5°
P
0.042
0.047
0.052
1.06
1.20
1.32
Q
0.034
0.039
0.044
0.86
1.00
1.11
Teccor® brand Thyristors
6 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs
Product Selector
Part Number
Voltage
400V
600V
Lxx06L5
X
Lxx06D5
X
800V
Gate Sensitivity Quadrants
1000V
Type
Package
I - II - III
IV
X
5 mA
5 mA
Sensitive Triac
TO-220L
X
5 mA
5 mA
Sensitive Triac
TO-252 D-PAK
Lxx06R5
X
X
5mA
5mA
Sensitive Triac
TO-220R
Lxx06V5
X
X
5 mA
5 mA
Sensitive Triac
TO-251 V-PAK
Lxx06L6
X
X
5 mA
10 mA
Sensitive Triac
TO-220L
Lxx06D6
X
X
5 mA
10 mA
Sensitive Triac
TO-252 D-PAK
Lxx06R6
X
X
5mA
10mA
Sensitive Triac
TO-220R
Lxx06V6
X
X
5 mA
10 mA
Sensitive Triac
TO-251 V-PAK
Lxx06L8
X
X
10 mA
20 mA
Sensitive Triac
TO-220L
Lxx06D8
X
X
10 mA
20 mA
Sensitive Triac
TO-252 D-PAK
Lxx06R8
X
X
10mA
20mA
Sensitive Triac
TO-220R
Lxx06V8
X
X
10 mA
20 mA
Sensitive Triac
TO-251 V-PAK
Qxx06VH3
X
X
10 mA
Alternistor Triac
TO-251 V-PAK
Qxx06DH3
X
X
10 mA
Alternistor Triac
TO-252 D-PAK
Qxx06L4
X
25 mA
Standard Triac
TO-220L
Qxx06R4
X
25 mA
Standard Triac
TO-220R
Qxx06N4
X
25 mA
Standard Triac
TO-263 D²-PAK
Qxx06LH3
X
X
10mA
Alternistor Triac
TO-220L
Qxx06RH3
X
X
10mA
Alternistor Triac
TO-220R
Qxx06LH4
X
X
X
X
35 mA
Alternistor Triac
TO-220L
Qxx06RH4
X
X
X
X
35 mA
Alternistor Triac
TO-220R
Qxx06VH4
X
X
X
X
35 mA
Alternistor Triac
TO-251 V-PAK
Qxx06DH4
X
X
X
X
35 mA
Alternistor Triac
TO-252 D-PAK
Qxx06NH4
X
TO-263 D²-PAK
X
X
X
35 mA
Alternistor Triac
Qxx06L5
X
X
X
50 mA
Standard Triac
TO-220L
Qxx06R5
X
X
X
50 mA
Standard Triac
TO-220R
Qxx06N5
X
X
X
50 mA
Standard Triac
TO-263 D²-PAK
Packing Options
Part Number
Lxx06L/RyTP
Marking
Weight
Packing Mode
Base Quantity
Lxx06L/Ry
2.2 g
Tube Pack
500 (50 per tube)
Lxx06DyTP
Lxx06Dy
0.3 g
Tube
750 (75 per tube)
Lxx06DyRP
Lxx06Dy
0.3 g
Embossed Carrier
2500
Lxx06VyTP
Qxx06L/RyyTP
Lxx06Vy
0.4 g
Tube
750 (75 per tube)
Qxx06L/Ryy
2.2 g
Tube Pack
500 (50 per tube)
Qxx06NyyTP
Qxx06Nyy
1.6 g
Tube
500 (50 per tube)
Qxx06NyyRP
Qxx06Nyy
1.6 g
Embossed Carrier
500
Qxx06DyyTP
Qxx06Dyy
0.3 g
Tube
750 (75 per tube)
Qxx06DyyRP
Qxx06Dyy
0.3 g
Embossed Carrier
2500
Qxx06VyyTP
Qxx06Vyy
0.4 g
Tube
750 (75 per tube)
Note: xx = voltage; yy = sensitivity
© 2016 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 05/04/16
Teccor® brand Thyristors
6 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs
TO-252 Embossed Carrier Reel Pack (RP) Specifications
Meets all EIA-481-2 Standards
* Cover tape
0.315
(8.0)
MT1
XXXXXX
DC
0.059
DIA
(1.5)
XX
DC
XX
XXXXXX
*
DC
0.524
(13.3)
XX
0.63
(16.0)
XXXXXX
Gate
XXXXXX
0.157
(4.0)
MT2
12.99
(330.0)
0.512 (13.0) Arbor
Hole Dia.
Dimensions
are in inches
(and millimeters).
0.64
(16.3)
Direction of Feed
TO-263 Embossed Carrier Reel Pack (RP) Specifications
Meets all EIA-481-2 Standards
0.63
(16.0)
0.157
(4.0)
0.059
DIA
(1.5)
0.945
(24.0)
0.827
(21.0)
Gate
MT1
*
* Cover tape
MT2
0.512 (13.0) Arbor
Hole Dia.
12.99
(330.0)
Dimensions
are in inches
(and millimeters).
1.01
(25.7)
Direction of Feed
© 2016 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 05/04/16
Teccor® brand Thyristors
6 Amp Sensitive, Standard & Alternistor (High Commutation) Triacs
Part Numbering System
Part Marking System
Q 60 06 L H4 56
DEVICE TYPE
L : Sensitive Triac
Q : Triac or Alternistor
VOLTAGE RATING
40 : 400V
60 : 600V
80 : 800V
K0 : 1000V
CURRENT
06: 6A
PACKAGE TYPE
L : TO-220 Isolated
R : TO-220 Non-Isolated
N : TO-263 (D2PAK)
V : TO-251 (VPAK)
D : TO-252 (DPAK)
TO-251AA- (V Package)
TO-252AA- (D Package)
LEAD FORM DIMENSIONS
xx : Lead Form Option
SENSITIVITY & TYPE
Sensitive Triac:
3 : 3 mA (QI, II, III, IV)
5 : 5 mA (QI, II, III, IV)
6 : 5 mA (QI, II, III)
10 mA (QIV)
8 : 10 mA (QI, II, III)
20 mA (QIV)
Standard Triac:
4 : 25 mA (QI, II, III)
5 : 50 mA (QI, II, III)
Alternistor Triac:
H3 : 10 mA (QI, II, III)
H4 : 35 mA (QI, II, III)
®
L6006V5
YMLDD
L6006V5
®
YMLDD
®
Date Code Marking
Y:Year Code
M: Month Code
L: Location Code
DD: Calendar Code
TO-220 AB - (L and R Package)
TO-263 AB - (N Package)
Q6006R5
YM
®
Date Code Marking
Y:Year Code
M: Month Code
XXX: Lot Trace Code
®
© 2016 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 05/04/16