Freescale Semiconductor, Inc. Quarter 3, 2015 SG1002 Rev. 47 Analog Selector Guide Making embedded systems better with robust reliable performance freescale.com Contents PRODUCTS Sub category Page number Battery Management Battery Sensors Battery Chargers Battery Cell Controller Page 3 Page 4 Page 5 Drivers and Switches LED Drivers Low-side Switches High-side Switches Predrivers Squib Drivers Configurable I/O Valve Control Page 6 Page 6 Page 7 Page 11 Page 12 Page 12 Page 13 Engine and DC Motor Control Powertrain and Engine Control Automotive Alternator Voltage Regulators H-Bridges High Current Motor Control Microcontroller (MCU) and Injection Driver Page 14 Page 15 Page 15 Page 17 Page 18 Interface Audio codec Page 18 Power Management Linear Regulators Switching Regulators PMICs for i.MX Processors System Basis Chip LED Drivers Power over Ethernet (PoE) Page 18 Page 18 Page 19 Page 20 Page 23 Page 23 Radar ADAS Transceiver Page 23 Transceivers CAN Physical Interface Components LIN, ISO-914,J-1850 Physical Interface Components Distributed Systems Interface (DSI) Components Page 23 Page 24 Page 25 SG1002 (Selector Guide) (3Q2015) – 2 Freescale Semiconductor Analog Products The product categories range from Power Actuation and Communication Transceivers to Signal Conditioning and Embedded MCU + Power. Power Actuation covers a broad range of load control and drivers, including motor control. SMARTMOS—Freescale Semiconductor SMARTMOS technology allows designers to interface high-precision components with the harsh automotive environment. Cost-Effective—Ideally suited for rug automotive applications, SMARTMOS solutions offer a cost-effective blend of analog, digital, and robust power silicon that enables integrated, mixed signal, power control ICs. Functionality—SMARTMOS solutions implement traditional analog functions with smaller die size, and a modular process produces components with the minimum number of process steps for each circuit, minimizing overhead. Benefits—Freescale Semiconductor SMARTMOS technology brings a wide range of benefits to today’s designs, including component reductions, power capability, durability, efficiency, precision, high-performance analog, and robustness. Packaging - Freescale device may be offered in EPP and RoHS compliant packages; view the external web for specifics. For additional information, visit: Documentation, Tool, and Product Libraries www.freescale.com www.freescale.com/analog www.freescale.com/powermanagement www.freescale.com/productlongevity www.freescale.com/files/shared/doc/ prod_num_scheme/ANALOGPN.pdf Battery Management - Battery Sensors Product Description Main Characteristics Operating Voltage (V) Output Voltages Protection Features Packaging Status MM912_637 Battery Sensor with LIN for 12 V Lead-acid Batteries Simultaneous Battery voltage & current measurement with 16-bit sigma-delta ADC & IIR filter Voltage Regulators: 2.5 V/10 mA & 60 mA, 5.0 V/80 mA LIN 2.1 Physical Layer w/Selectable Slew rates and triggered wake-up 3.5 to 28 VDDA= 2.25 V to 2.75 V VDDH=2.25 V to 2.75 V VDDX=3.15 V to 5.9 V VDDA Output Current limitation= 10 mA VDDH Output Current limitation= 65 mA VDDX Output Current Limitation=45 to 80 mA Overtemperature protect Tolerates input voltage up to 42 V DC 48-pin QFN Exposed Pad Production EVB MM9Z1_638 Battery Sensor with CAN and LIN Multiple Battery voltage measurement I/Os synchronized with current measurement using two 16-bit sigma-delta ADCs & IIR filters respectively A dedicated 16-bit sigma-delta ADC for multiple Temperature measurements Voltage Regulator directly supplied from the battery with a operating range up to 28 V Embedded 16/32-bit MCU, Flash, EEPROM, RAM, SPI Integrated LIN 2.2 protocol and physical interface, and an MSCAN protocol controller 3.5 to 28 VDDA= 2.25 V to 2.75 V VDDH=2.25 V to 2.75 V VDDX=3.2 V to 5.25 V VDDA Output Current limitation= 30 mA VDDH Output Current limitation= 65 mA VDDX Output Current Limitation= 150 to 300 mA Overtemperature protect Tolerates input voltage up to 42 V DC 48-pin QFN Exposed Pad Production EVB, Ref. Design SG1002 (Selector Guide) (3Q2015) – 3 Battery Management - Battery Chargers Product Description Main Characteristics Operating Voltage (V) Output Voltages Protection Features Packaging Status MC34671 High-input Voltage Charger for Single-cell Li-Ion or Li-Polymer Batteries Fixed output charge voltage with ±0.7% voltage accuracy and a maximum user programmable charge current of 600 mA with ±5% current accuracy, Supports trickle, CC and CV charge modes 2.6 to 10 4.2 V @ 600 mA Undervoltage POR, Input overvoltage protection above 11 V, Overtemperature protect, Tolerates input voltage up to 28 V DC 8-pin UDFN Exposed Pad Production EVB MC34673 High-input Voltage Charger for Single-cell Li-Ion or Li-Polymer Batteries Fixed output charge voltage with ±0.7% voltage accuracy and a maximum user programmable charge current of 1200 mA, with ±6% current accuracy, Supports trickle, CC, and CV charge modes 2.6 to 6.6 4.2 V @ 1200 mA Undervoltage POR, Input overvoltage protection above 6.8 V, Overtemperature protect, Tolerates input voltage up to 28 V DC 8-pin UDFN Exposed Pad Production EVB MC34674 High-input Voltage Travel Charger for Fixed output charge voltage with ±0.4% Single-cell Li-Ion or Li-Polymer voltage accuracy and a maximum factory Batteries selectable charge current of 1050 mA with ±8% current accuracy, Supports trickle, CC, and CV charge modes, Interface to NTC thermistor 4.3 to 10 4.2 V @ various currents - see Data Sheet Undervoltage POR, Input Overvoltage protection above 11 V, Overtemperature protect, Tolerates input voltage up to 28 V DC 8-pin UDFN Exposed Pad Production EVB MC34675 High-input Voltage Charger for Single-cell Li-Ion or Li-Polymer Batteries Fixed output charge voltage with ±0.7% voltage accuracy and a maximum factory selectable charge current of 1050 mA with ±6% current accuracy, Supports trickle, CC, and CV charge modes, Interface to NTC thermistor 2.6 to 6.6 4.2 V @ various currents - see Data Sheet Undervoltage POR, Input overvoltage protection above 11 V, Overtemperature protect, Tolerates input voltage up to 28 V DC 8-pin UDFN Exposed Pad Production EVB BC3770 2.0 A Switch-Mode Charger with Intelligent Power-Path for 1-Cell Li-Ion Battery Dual-path output to power-up system in dead battery, Single input for USB/TA, High-efficiency synchronous switching regulator, 20 V maximum withstanding input voltage, Charge reduction mode for maximizing charging efficiency 4.5 to 6.2 5.0 to 5.2 V SG1002 (Selector Guide) (3Q2015) – 4 Adaptive input current, Overvoltage, overcurrent, Overtemperature, Shortcircuit 25-Pin WLCSP Production EVB Battery Management - Battery Cell Controller Product Description Main Characteristics Operating Voltage (V) Output Voltages Protection Features Packaging Status MC33771 Battery Cell Controller IC 4.0 Mbps SPI or 2.0 Mbps Isolated Differential Communication, 14 cell voltage input channels, One current channel with Auto PGA and Coulomb Counter, 7 GPIO configurable as Temperature Sensor Inputs,14 onboard 300 mA balancing switches, 5.0 V @ 5.0 mA Output Reference Supply, Low power mode with monitoring and cell balance capability, I2C interface for external EEPROM, Automatic cell over/under voltage and over/under temperature detection routable to Fault Output Pin, Hot plug capable, Fully compatible with the MC33772 for 6 cells 9.6 to 61.6 Cell balancing : 10 V Fault pin: 5.0 V GPIO: 5.0 V Single chip ASIL C capable, Diagnostics of internal and external faults as open lines, shorted lines, and leakage currents, Diagnostic state routable to the Fault Output pin, Die overtemperature detection and protection 64-pin LQFPEP 1Q 2016 EVB MC33772 Battery Cell Controller IC 4.0 Mbps SPI or 2.0 Mbps Isolated Differential Communication, 6 cell voltage input channels, one current channel with Auto PGA and Coulomb Counter, 7 GPIO configurable as Temperature Sensor Inputs, 6 onboard 300 mA balancing switches, 5.0 V @ 5.0 mA Output Reference Supply, Low power mode with monitoring and cell balance capability, I2C interface for external EEPROM, Automatic cell over/under voltage and over/undertemperature detection routable to Fault Output Pin,Hot plug capable, Fully compatible with the MC33771 for 14 cells 5.0 to 30 (SPI type) 7.0 to 30 (TPL type) Cell balancing : 10 V Fault pin: 5.0 V GPIO: 5.0 V Single chip ASIL C capable, Diagnostics of internal and external faults as open lines, shorted lines, and leakage currents, Diagnostic state routable to the Fault Output pin, Die overtemperature detection and protection 48-PIN LQFPEP 2Q 2016 EVB SG1002 (Selector Guide) (3Q2015) – 5 Drivers and Switches — LED Drivers Product MC34844 Description Main Characteristics Operating Input Voltage (V) Output Voltages Protection Features Packaging Status 7.0 to 28 60 V, @ 3.0 A Undervoltage Lockout, Overvoltage protection, Overtemperature protect, Overcurrent protection, Output Short protect 32-pin QFN Exposed Pad Production EVB (1) 10 Channel LED Backlight Driver with High efficiency LED driver for use in Integrated Power Supply backlighting LCD displays, Capable of driving more than 150 LEDs in 10 parallel strings, with 50/80 mA per string, Currents in the 10 strings are matched to within ±2%, Controlled through an I2C bus, Contains a PWM generator for LED dimming 1.Supporting backlight EVB - KITLEDBKLT16EVBE Drivers and Switches— Low-side Switches Product Description No of High-side Outputs or Low-side Continuous Current Each Output (A) RDS(on) (m) of Each Output Current Limitation (A) Current Limitation Standby Max (A) Control Status/ Fault Reporting Protection Features Packaging Status (2) MC33800 Engine Control IC, with Eight Low-side Switches, Two Constant Current Low-side Switches and Six MOSFET gate predrivers 8 L 8 @ 0.35 2 @ 700 6 @ 1000 2 @ 6.0 6 @ 2.0 30 Parallel, SPI SPI Open Load detect, Overcurrent protect, Overvoltage protect, Short load detect, Undervoltage protect, Thermal protect 54-pin SOICW Exposed Pad Production EVB MC33810 Engine Control Integrated Circuit capable of driving a combination of four Low-side loads and four MOSFETs or IGBT gates 4 L 1.0 100 6.0 30 Parallel, SPI SPI Status Flags Shorted Load detect, Thermal protect 32-pin SOICW Exposed Pad Production EVB MC33812 Engine control power IC, with three Low-side drivers, one pre-driver, +5.0 V pre-regulator, ISO-9141 physical interface and MCU watchdog circuit. 3 L 2L @ 4.0 1L @ 1.5 2 @ 200 1 @ 1000 2 @ 6.0 1 @ 2.0 2 @ 1000 1 @ 20 Parallel Parallel Overcurrent, Outputs Short to Battery, Overtemperature protect 32-pin SOICW Exposed Pad Production EVB Ref. Design MC33879 (1.0 RDS(on)) Configurable Eight Output SPI Controlled Switch 8 H/L 0.35 550 1.2 25 SPI w/ 2 PWM SPI Short-circuit, Current Limit, Temp Sense 32-pin SOICW Exposed Pad Production EVB MC33882 (0.8 RDS(on)) Smart Six Output Switch with SPI and Parallel Input Control 8 L 1.0 375 3.0 10 SPI SPI Short-circuit, Current Limit, Temp Sense 30-pin HSOP, 32-pin SOICW Exposed Pad, 32-pin QFN Exposed Pad Production EVB MC33996 16 Output Hardware Low-side Switch with 24-bit Serial Input Control 16 L 0.5 450 1.0 to 2.5 50 SPI SPI Short-circuit, Current Limit, Temp Sense, Open Load 32-pin SOICW Production EVB MC33999 16 Output Hardware Low-side Switch with 24-bit Serial Input Control and 8 Parallel Control 16 L 0.5 450 1.0 to 2.5 50 SPI and Parallel SPI Short-circuit, Current Limit, Temp Sense, Open Load 54-pin SOICW Production EVB 2.Products available with SPI Control work with the KITUSBSPIEVME and the KITUSBSPIDGLEVME USB-SPI Interface Boards. SG1002 (Selector Guide) (3Q2015) – 6 Drivers and Switches — High-side Switches Product Description No of Outputs High-side or Lowside Maximum Current Each Output (A) RDS(on) (m) of Each Output Current Limitation (A) Current Limitation Standby Max (A) Control Status/Fault Reporting Overcurrent, Status Pin, Overtemperature, ShortCurrent circuit, Undervoltage Lock Monitor, Out Temperature (3) Protection Features Packaging Status 16-pin PQFN Production MC12XS2 12 V Multipurpose Low RDS(on) eXtreme Switches MC33981 Single High-side Switch (4.0 m), with PWM, Protection and Diagnostics 1 H 40 4 100 5.0 Parallel MC33982 Self Protected 2.0 m Switch with Diagnostic and Protection 1 H 60 2 150 5.0 SPI and Parallel SPI Temp Sense, Over/ Undervoltage, Shutdown, Overcurrent, Reverse Polarity, Current Recopy 16-pin PQFN Production EVB MC33984 Self Protected 4.0 m Switch with Diagnostic and Protection 2 H 30 4 100 5.0 SPI and Parallel SPI Temp Sense, Over/ Undervoltage, Shutdown, Overcurrent, Reverse Polarity, Current Recopy 16-pin PQFN Production EVB MC33988 Self Protected 8.0 m Switch with Diagnostic and Protection 2 H 30 8 60 5.0 SPI and Parallel SPI Temp Sense, Over/ Undervoltage, Shutdown, Overcurrent, Reverse Polarity, Current Recopy 16-pin PQFN Production EVB MC12XS3 12V Automotive Exterior Lighting Multichannel eXtreme Switches MC06XS3517 Penta High-side Switch (3 x 6 m, 2 x 17 m), with PWM, Protection, Diagnostics and SPI Control. Also, 1 logic level output driver. 5+1 H 2.8, 5.5 3 X 6, 2 X 17 48, 96 5.0 SPI and Parallel SPI Overcurrent, Overtemperature, Overvoltage, Undervoltage & Shortcircuit protect 24-pin PQFN Production EVB MC07XS3200 Dual High-side Switch (2 x 7 m), with PWM, Protection, Diagnostics and SPI Control 2 H 6.0 2X7 93 5.0 SPI and Parallel SPI Fail-safe mode, Overcurrent shutdown, Overtemperature, Shortcircuit 32-pin SOICW Exposed Pad Production MC09XS3400 Quad High-side Switch (4 x 9 m), with PWM, Protection, Diagnostics and SPI Control 4 H 6.0 4X9 89 5.0 SPI and Parallel SPI Fail-safe mode, Overcurrent shutdown, Overtemperature, Shortcircuit 24-pin PQFN Production EVB MC10XS3412 Quad High-side Switch (2 x 10 m, 2 x 12 m), with PWM, Protection, Diagnostics and SPI Control 4 H 6.0 2 x 10, 2 x 12 78 5.0 SPI and Parallel SPI Fail-safe mode, Overcurrent shutdown, Overtemperature, Shortcircuit 24-pin PQFN Production EVB MC10XS3425 Quad High-side Switch (2 x 10 m, 2 x 25m), with PWM, Protection, Diagnostics and SPI Control 4 H 6.0 2 X 10, 2 X 25 39, 78 5.0 SPI and Parallel SPI Fail-safe mode, Overcurrent shutdown, Overtemperature, Shortcircuit 32-pin SOICW Exposed Pad Production EVB MC10XS3435 Quad High-side Switch (2 x 12 m, 2 x 35 m), with PWM, Protection, Diagnostics and SPI Control 4 H 6.0 2 x 10, 2 x 35 78 5.0 SPI and Parallel SPI Fail-safe mode, Overcurrent shutdown, Overtemperature, Shortcircuit 24-pin PQFN Production EVB MC10XS3535 Penta High-side Switch (3 x 10 m, 2 x 35 m), with PWM, Protection, Diagnostics and SPI Control. Also, 1 logic level output driver. 5+1 H 2.8, 5.5 3 x10, 2 x 35 44, 88 2.0 SPI and Parallel SPI Fail-safe mode, Overcurrent shutdown, Overtemperature, Shortcircuit 24-pin PQFN Production EVB SG1002 (Selector Guide) (3Q2015) – 7 Drivers and Switches — High-side Switches (continued) Product No of Outputs High-side or Lowside Maximum Current Each Output (A) RDS(on) (m) of Each Output Current Limitation (A) Current Limitation Standby Max (A) Control Status/Fault Reporting Protection Features Packaging Status MC15XS3400 Quad High-side Switch (4 x 15 m), with PWM, Protection, Diagnostics and SPI Control 4 H 6.0 15 78 5.0 SPI and Parallel SPI Fail-safe mode, Overcurrent shutdown, Overtemperature, Shortcircuit 24-pin PQFN Production EVB MC35XS3400 Quad High-side Switch (4 x 35 m), with PWM, Protection, Diagnostics and SPI Control 4 H 6.0 35 39 5.0 SPI and Parallel SPI Fail-safe mode, Overcurrent shutdown, Overtemperature, Shortcircuit 24-pin PQFN Production EVB MC35XS3500 Penta High-side Switch (5 x 35 m), with PWM, Protection, Diagnostics and SPI Control. Also, 1 logic level output driver. 5+1 H 2.8 35 39.5 2.0 SPI and Parallel SPI Fail-safe mode, Overcurrent shutdown, Overtemperature, Shortcircuit 24-pin PQFN Production EVB MC12XS6 Description (3) External Automotive Lighting Multichannel Scalable eXtreme Switches MC07XS6517 Penta High-side Switch (3 x 7 m2x 17 m), with PWM, Protection, Diagnostics and SPI Control. Also, 1 logic level output driver. 5+1 H 11, 5.5 3 x 17 2x7 100, 50 20 SPI Parallel SPI Fail-safe mode, Overcurrent shutdown, Overtemperature, Shortcircuit 54-pin SOICW Exposed PAD Production EVB MC08XS6421 Quad High-side Switch (2 x 8 m2x 21 m), with PWM, Protection, Diagnostics and SPI Control. Also, 1 logic level output driver 4+1 H 11, 5.5 2 x 8.0 2 x 21.0 100, 50 20 SPI Parallel SPI Fail-safe mode, Overcurrent shutdown, Overtemperature, Shortcircuit 32-pin SOICW Exposed PAD Production EVB MC17XS6400 Quad High-side Switch (4 x 17 m), with PWM, Protection, Diagnostics and SPI Control. Also, 1 logic level output driver 4+1 H 5.5 4 x 17 50 20 SPI Parallel SPI Fail-safe mode, Overcurrent shutdown, Overtemperature, Shortcircuit 32-pin SOICW Exposed PAD Production EVB MC17XS6500 Penta High-side Switch (5 x 17 m), with PWM, Protection, Diagnostics and SPI Control. Also, 1 logic level output driver 5+1 H 5.5 5 x 17 50 20 SPI Parallel SPI Fail-safe mode, Overcurrent shutdown, Overtemperature, Shortcircuit 32-pin SOICW Exposed PAD Production EVB MC40XS6500 Penta High-side Switch (5 x 40 m), with PWM, Protection, Diagnostics and SPI Control. Also, 1 logic level output driver 5+1 H 3.9 5 x 40 35 20 SPI Parallel SPI Fail-safe mode, Overcurrent shutdown, Overtemperature, Shortcircuit 32-pin SOICW Exposed PAD Production EVB MC10XS6200 Dual High-side Switch (2 x 10 m), with PWM, Protection, Diagnostics and SPI Control. Also, 1 logic level output driver 2+1 H 9 2 x 10 85 20 SPI Parallel SPI Fail-safe mode, Overcurrent shutdown, Overtemperature, Shortcircuit 32-pin SOICW Exposed PAD Production EVB MC10XS6225 Dual High-side Switch (1 x 10 m1 x 25 m), with PWM, Protection, Diagnostics and SPI Control. Also, 1 logic level output driver 2+1 H 9, 4.5 1 x 10 1 x 25 85, 40 20 SPI Parallel SPI Fail-safe mode, Overcurrent shutdown, Overtemperature, Shortcircuit 32-pin SOICW Exposed PAD Production EVB MC10XS6325 Triple High-side Switch (2 x 10 m1 x 25 m), with PWM, Protection, Diagnostics and SPI Control. Also, 1 logic level output driver 3+1 H 9, 4.5 2 x 10 1 x 25 85, 40 20 SPI Parallel SPI Fail-safe mode, Overcurrent shutdown, Overtemperature, Shortcircuit 32-pin SOICW Exposed PAD Production EVB SG1002 (Selector Guide) (3Q2015) – 8 Drivers and Switches — High-side Switches (continued) Product Description MC25XS6300 Triple High-side Switch (3 x 25 m), with PWM, Protection, Diagnostics and SPI Control. Also, 1 logic level output driver MC24XS4 No of Outputs High-side or Lowside Maximum Current Each Output (A) RDS(on) (m) of Each Output Current Limitation (A) Current Limitation Standby Max (A) Control Status/Fault Reporting Protection Features Packaging Status 3+1 H 4.5 3 x 25 40 20 SPI Parallel SPI Fail-safe mode, Overcurrent shutdown, Overtemperature, Shortcircuit 32-pin SOICW Exposed PAD Production EVB (3) 24 V Multipurpose Low RDS(on) Intelligent eXtreme Switches MC06XS4200 Dual High-side Switch (2 x 6 m), with PWM, Protection, Diagnostics and SPI Control (24 V) 2 H 9.0 2X6 30, 90 10 SPI and Parallel SPI Fail-safe mode, Overcurrent shutdown, Overtemperature, Shortcircuit, Parallel operation 23-pin PQFN Production EVB MC10XS4200 Dual High-side Switch (2 x 10 m), with PWM, Protection, Diagnostics and SPI Control (24 V) 2 H 6.0 2 X 10 18, 55 10 SPI and Parallel SPI Fail-safe mode, Overcurrent shutdown, Overtemperature, Shortcircuit, Parallel operation 23-pin PQFN Production EVB MC20XS4200 Dual High-side Switch (2 x 20 m), with PWM, Protection, Diagnostics and SPI Control (24 V) 2 H 3.0 2 X 20 9.0, 27 10 SPI and Parallel SPI Fail-safe mode, Overcurrent shutdown, Overtemperature, Shortcircuit, Parallel operation 23-pin PQFN Production EVB MC22XS4200 Dual High-side Switch (2 x 22 m), with PWM, Protection, Diagnostics and SPI Control (24 V) 2 H 3.0 2 X 22 9.0, 27 10 SPI and Parallel SPI Fail-safe mode, Overcurrent shutdown, Overtemperature, Shortcircuit, Parallel operation 32-pin SOIC Exposed PAD Production EVB MC50XS4200 Dual High-side Switch (2 x 50 m), with PWM, Protection, Diagnostics and SPI Control (24 V) 2 H 1.2 2 X 50 3.5, 11 10 SPI and Parallel SPI Fail-safe mode, Overcurrent shutdown, Overtemperature, Shortcircuit, Parallel operation 32-pin SOIC Exposed PAD Production EVB Status Pin, Overcurrent, Current Overtemperature, ShortMonitor, circuit, Undervoltage lock Temperature out 16-pin PQFN Production MC12XSB 12 V Industrial Multipurpose Low RDS(on) eXtreme Switches MC34981 Single High-side Switch (4.0 m), with PWM, Protection and Diagnostics 1 H 40 4 100 5.0 Parallel MC34982 Single High-side Switch (2.0 m), with Protection and Diagnostics 1 H 60 2 150 5.0 SPI and Parallel SPI Temp Sense, Over/ Undervoltage, Shutdown, Overcurrent, Reverse Polarity, Current Recopy 16-pin PQFN Production EVB MC34984 Self Protected (4.0 m Switch with Diagnostic and Protection 2 H 30 4 100 5.0 SPI and Parallel SPI Temp Sense, Over/ Undervoltage, Shutdown, Overcurrent, Reverse Polarity, Current Recopy 16-pin PQFN Production EVB MC34988 Self Protected (8.0 m) Switch with Diagnostic and Protection 2 H 30 8 60 5.0 SPI and Parallel SPI Temp Sense, Over/ Undervoltage, Shutdown, Overcurrent, Reverse Polarity, Current Recopy 16-pin PQFN Production EVB MC12XSC 12V External Industrial Lighting Multichannel eXtreme Switches 6.0 2x7 93 5.0 SPI and Parallel SPI Fail-safe mode, Overcurrent shutdown, Overtemperature, Shortcircuit 32-pin SOICW Exposed Pad Production MC07XSC200 Dual High-side Switch (2 x 7 m), with PWM, Protection, Diagnostics and SPI Control 2 H SG1002 (Selector Guide) (3Q2015) – 9 Drivers and Switches — High-side Switches (continued) Product Description MC10XSC425 Quad High-side Switch (2 x 10 m, 2 x 25m), with PWM, Protection, Diagnostics and SPI Control MC12XSF No of Outputs High-side or Lowside Maximum Current Each Output (A) RDS(on) (m) of Each Output Current Limitation (A) Current Limitation Standby Max (A) Control Status/Fault Reporting Protection Features Packaging Status 4 H 6.0 2 x 0, 2 x 25 39, 78 5.0 SPI and Parallel SPI Fail-safe mode, Overcurrent shutdown, Overtemperature, Shortcircuit 32-pin SOICW Exposed Pad Production EVB (3425) (3) External Industrial Lighting Multichannel Scalable eXtreme Switches MC07XSF517 Penta High-side Switch (3 x 7 m2 x 17 m), with PWM, Protection, Diagnostics and SPI Control. Also, 1 logic level output driver. 5+1 H 11, 5.5 3 x 17 2x7 100, 50 20 SPI Parallel SPI Fail-safe mode, Overcurrent shutdown, Overtemperature, Shortcircuit 54-pin SOICW Exposed PAD Production EVB (6517) MC17XSF500 Penta High-side Switch (5 x 17 m), with PWM, Protection, Diagnostics and SPI Control. Also, one logic level output driver. 5+1 H 5.5 5 x 17 50 20 SPI Parallel SPI Fail-safe mode, Overcurrent shutdown, Overtemperature, Shortcircuit 32-pin SOICW Exposed PAD Production EVB (6500) MC17XSF400 Quad High-side Switch (4 x 17 m), with PWM, Protection, Diagnostics and SPI Control. Also, 1 logic level output driver 4+1 H 5.5 4 x 17 50 20 SPI Parallel SPI Fail-safe mode, Overcurrent shutdown, Overtemperature, Shortcircuit 32-pin SOICW Exposed PAD Production EVB MC08XSF421 Quad High-side Switch (2 x 8 m, 2 x 21 m), with PWM, Protection, Diagnostics and SPI Control. Also, 1 logic level output driver 4+1 H 11, 5.5 2x8 2 x 21 100, 50 20 SPI Parallel SPI Fail-safe mode, Overcurrent shutdown, Overtemperature, Shortcircuit 32-pin SOICW Exposed PAD Production EVB MC36XSD 36 V Multipurpose Industrial Low RDS(on) Intelligent eXtreme Switches MC06XSD200 Dual High-side Switch (2 x 6 m), with PWM, Protection, Diagnostics and SPI Control (36 V) 2 H 9.0 2x6 30, 90 10 SPI and Parallel SPI Fail-safe mode, Overcurrent shutdown, Overtemperature, Shortcircuit, Parallel operation 23-pin PQFN Production EVB (4200) MC10XSD200 Dual High-side Switch (2 x 10 m), with PWM, Protection, Diagnostics and SPI Control (36 V) 2 H 6.0 2 x 10 18, 55 10 SPI and Parallel SPI Fail-safe mode, Overcurrent shutdown, Overtemperature, Shortcircuit, Parallel operation 23-pin PQFN Production EVB (4200) MC16XSD200 Dual High-side Switch (2 x 16 m), with PWM, Protection, Diagnostics and SPI Control (36 V) 2 H 3.0 2 x 16 9.0, 27 10 SPI and Parallel SPI Fail-safe mode, Overcurrent shutdown, Overtemperature, Shortcircuit, Parallel operation 23-pin PQFN Production EVB (4200) MC22XSD200 Dual High-side Switch (2 x 22 m), with PWM, Protection, Diagnostics and SPI Control (36 V) 2 H 3.0 2 x 22 9.0, 27 10 SPI and Parallel SPI Fail-safe mode, Overcurrent shutdown, Overtemperature, Shortcircuit, Parallel operation 32-pin SOICW Exposed PAD Production EVB MC50XSD200 Dual High-side Switch (2 x 50 m), with PWM, Protection, Diagnostics and SPI Control (36 V) 2 H 1.2 2 x 50 3.5, 11 10 SPI and Parallel SPI Fail-safe mode, Overcurrent shutdown, Overtemperature, Shortcircuit, Parallel operation 32-pin SOICW Exposed PAD Production EVB 3.Products available with SPI Control work with the KITUSBSPIEVME and the KITUSBSPIDGLEVME USB-SPI Interface Boards. SG1002 (Selector Guide) (3Q2015) – 10 Drivers and Switches — Predrivers Product Description Main Characteristics Operating Voltage (V) Control (4) Output Drives High/Low-side, Drive Current Status Reporting(4) Protection Features Packaging Status MC33800 Engine Control Integrated Circuit Engine control IC, with six MOSFET gate predrivers, eight Low-side Switches, and two constant current Low-side switches 5.0 to 36 Parallel, SPI 6 H, 2.0 mA (typ.) SPI Open Load Detect, Overcurrent Protect, Overvoltage Protect, Shorted Load Detect, Undervoltage Protect, Thermal Protect 54-pin SOICW Exposed Pad Production EVB MC33810 Automotive Engine Control IC Engine control IC with four MOSFET/IGBT gate drivers and four Low-side switches. 4.5 to 36 Parallel, SPI 4 L, 780 A (typ.) SPI, Status Flags Shorted Load Detect, Thermal Protect 32-pin SOICW Exposed Pad Production EVB MC33812 Single Cylinder Engine Control IC Engine control power IC with three Low-side driver, one pre-driver, +5.0 V pre-regulator, IOS-9141 physical interface and MCU watchdog circuit. 4.5 to 36 Parallel 2L, 4.0 A (typ.) 1L, 1.5 A (typ..) Parallel Overcurrent Outputs Short to Battery, Overtemperature Protect 32-pin SOICW Exposed Pad Production EVB Ref. Design MC33883 Quad TMOS driver, for fuel injector Quad TMOS driver, in H-Bridge configuration 5.5 to 28/55 4 non-invert CMOS, LSTTL logic n/a None Overvoltage, Undervoltage 20-pin SOICW Production EVB MC33937 Three-Phase Field Effect Transistor Predriver Triple High-side and Low-side FET predrivers, with parallel & SPI control and programmable shoot-through protect. 8.0 to 58 Parallel, SPI 3 H, 3 L, 1.0 A (typ.) SPI Programmable Deadtime, Reverse Charge Injection Protect 54-pin SOICW Exposed Pad Production EVB MC34937 Three-Phase Field Effect Transistor Predriver Triple high-side and low-side FET predrivers with parallel and SPI control and programmable shoot-through protect 8.0 to 58 Parallel, SPI 3 H, 3 L, 1.0 A (typ.) SPI Programmable Deadtime, Reverse Charge Injection Protect 54-pin SOICW Exposed Pad Production EVB GD3000 Three Phase Field Effect Transistor Pre-driver Triple High-side and Low-side FET predrivers, with parallel & SPI control and programmable deadtime (shoot-through protect) 8.0 to 58 Parallel, SPI 3 H, 3 L, 1.0 A (typ.) SPI Programmable Deadtime, Reverse Charge Injection Protect 54-pin QFN Production EVB Planned 4.Products available with SPI Control work with the KITUSBSPIEVME and the KITUSBSPIDGLEVME USB-SPI Interface Boards. SG1002 (Selector Guide) (3Q2015) – 11 Drivers and Switches — Squib Drivers Product MC33797 Description Four Channel Squib Driver IC Main Characteristics Regulation Voltage Operating Voltage (V) Packaging Status Four-Channel High-side and Low-side 2.0 A FET Switches, Externally Adjustable FET Current Limiting, Adjustable Current Limit Range: 0.8 A to 2.0 A, 8-bit SPI for Diagnostics and FET Switch Activation, Diagnostics for High-side Safing Sensor Status 7.0 to 35 4.75 to 5.25 32-pin SOICW Production Ref. Design Drivers and Switches — Configurable I/O Product Description Main Characteristics Switch Monitor Voltage (V) Operating Voltage (V) Packaging Status 0 to 64 10.5 to 15.5 16-pin SOICW Production EVB -14 to 38 5.5 to 26 32-pin SOICW, 32-pin SOICW Exposed Pad Production EVB MC33811 Solenoid Monitor Integrated Circuit 5 input solenoid monitoring to verify proper electrical and mechanical solenoid operation. MC33972 22 input Multiple Switch Detect Interface with 16 mA Wetting Current and Suppressed Wake-up Multiple switch detection interface with suppressed wake-up designed to detect closing and opening of up to 22 switch contacts (14 GND, 8 configurable), wetting current of 2.0 mA or 16 mA. MC33975 22 input Multiple Switch Detect Interface with 32 mA Wetting Current and Wake-up 22 inputs contact monitoring (14 GND, 8 configurable), 4.0 mA or 32 mA pulse wetting current, low-power mode interrupt capability, wake-up. Can supply current to external sensors. -14 to 38/40 5.5 to 26.5 32-pin SOICW Exposed Pad Production EVB MC33978 22 input Multiple Switch Detect Interface with programmable Wetting Current Multiple switch detection interface designed to detect closing and opening of up to 22 switch contacts (14 GND, 8 configurable), programmable wetting current from 2.0 to 20 mA, 24 to 1 Analog Multiplexer -14 to 38 V 4.5 to 36 32-pin SOICW Exposed Pad Production EVB CD1030 33 Channel Multiple Switch Detection Interface Multiple switch detection interface designed to detect closing with Programmable Wetting Current and opening of up to 33 switch contacts (21 GND, 11 configurable), programmable wetting current from 2.0 to 20 mA, 35 to 1 Analog Multiplexer -14 to 38 V 4.5 to 36 48-pin LQFP-EP 1Q 2016 EVB Planned MC34825 Micro-USB Interface IC Supports the UCS/OMTP recommended charger function as well as provides USB interface signal levels and other audio interface functions 0 to 28 (VBus only) 2.7 to 5.5 20-pin QFN Exposed Pad Production EVB MC34827 Mini or Micro-USB Interface IC This is a dedicated IC for managing charging and signal multiplexing between multifunctional devices and their accessories, via a 5 pin Mini or Micro-USB connector. 0 to 28 (VBus only) 2.7 to 5.5 20-pin 3x3 mm UTQFN Exposed Pad, 20-pin 3x4 mm UTQFN Exposed Pad Production MC34972 22 input Multiple Switch Detect Interface with 16 mA Wetting Current and Suppressed Wake-up Multiple switch detection interface with suppressed wake-up designed to detect closing and opening of up to 22 switch contacts (14 GND, 8 configurable), wetting current of 2.0 mA or 16 mA. -14 to 38 5.5 to 26 32-pin SOICW, 32-pin SOICW Exposed Pad Production EVB MC34975 22 input Multiple Switch Detect Interface with 32 mA Wetting Current and Wake-up 22 inputs contact monitoring (14 GND, 8 configurable), 4.0 mA or 32 mA pulse wetting current, low-power mode interrupt capability, wake-up. Can supply current to external sensors. -14 to 38/40 5.5 to 28 32-pin SOICW Exposed Pad Production EVB MC34978 22 input Multiple Switch Detect Interface with programmable Wetting Current Multiple switch detection interface designed to detect closing and opening of up to 22 switch contacts (14 GND, 8 configurable), programmable wetting current from 2.0 to 20 mA. 24 to 1 Analog Multiplexer. -14 to 38 V 4.5 to 36 32-pin SOICW Exposed Pad Production EVB -14 to 40 -14 to 40 SG1002 (Selector Guide) (3Q2015) – 12 Drivers and Switches — Valve Control Product Description Main Characteristics Load Supply Voltage (V) Min. Max. Other Features Interface and Input Control Protection Features Packaging Status SB0400 Two Channels Motorcycle and Integrates Safe switch, Valve Drivers, Scooter ABS in the smallest ABS Wheel Speed Sensor Interface, Motor Package Pump predriver, and a warning lamp driver inside a small package 7x7 size, Low RDS(on) (160 mOhms) allowing heatsink removal 5.3 30 Low RDS(on) (160 mOhms), PWM up to 5 KHz, Low-side Drivers up to 5.0 A, Vehicle Speed Output, Diagnostic line, Supervision SPI Overcurrent, Open Load, Overtemperature, VDS monitoring, Overvoltage, Undervoltage, Clock Failure, Watchdog 48-pin QFN-EP 4Q 2015 SB0401 One Channel Motorcycle and Integrates Safe switch, Valve Drivers, Scooter ABS in the smallest ABS Wheel Speed Sensor Interface, Motor Package Pump predriver, and a warning lamp driver inside a small package 7x7 size, Low RDS(on) (160 mOhms) allowing heatsink removal 5.3 30 Low RDS(on) (160 mOhms), PWM up to 5 KHz, Low-side Drivers up to 5.0 A, Vehicle Speed Output, Diagnostic line, Supervision SPI Overcurrent, Open Load, Overtemperature, VDS monitoring, Overvoltage, Undervoltage, Clock Failure, Watchdog 48-pin QFN-EP 4Q 2015 SB0410 Fully Integrated Quad Valve Controller System on Chip 36 V Integrates high precision, x4 valve drivers current regulated or x4 PWM valve drivers, DC motor pump predriver (16 KHz), x2 low- side drivers, ADC 10-bit safety state machine 6.0 36 Current regulated valve drivers up to 2.25 A, up to 5.0 KHz, PWM valve drivers up to 5.0 A, up to 5.0 KHz, Easy current control, x3 input A/D SPI Overcurrent, Open Load, Overtemperature, VDS monitoring, Overvoltage, Undervoltage, Clock Failure, Watchdog 48-pin LQFP-EP Production EVB SB0800 Fully Integrated Octal Valve Controller System on Chip 36 V Integrates fail-safe switch, high precision, x4 valve drivers current regulated, x4 PWM valve drivers, DC motor pump predriver, low-side driver and high-side driver for general purpose, ADC 10-bit safety state machine 6.0 36 Current regulated valve drivers up to 2.25 A, up to 5.0 KHz, PWM valve drivers up to 5.0 A, up to 5 KHz, Easy current control, x3 input A/D SPI Overcurrent, Open Load, Overtemperature, VDS monitoring, Overvoltage, Undervoltage, Clock Failure, Watchdog 64-pin LQFP-EP Production EVB SG1002 (Selector Guide) (3Q2015) – 13 Engine and DC Motor Control — Powertrain and Engine Control Product Description Main Characteristics Peak Current Limit (A) RDS(on) (m) Control (5) Operating Voltage (V) Packaging Status MC33800 Engine Control Integrated Circuit Engine control IC, with six MOSFET gate predrivers, eight Lowside Switches, and two constant current Low-side switches 2 @ 6.0 6 @ 2.0 1 @ 2.8 1 @ 1.0 2 @ 700 6 @ 1000 1 @ 250 1 @ 1000 SPI, Parallel 5.0 to 36 54-pin SOICW Exposed Pad Production EVB MC33810 Automotive Engine Control IC Engine control IC with four MOSFET/IGBT gate drivers and four Low-side switches. 6.0 100 SPI, Parallel 4.5 to 36 32-pin SOICW Exposed Pad Production EVB MC33811 Solenoid Monitor Integrated Circuit 5 input solenoid monitoring to verify proper electrical and mechanical solenoid operation. - - SPI 10.5 to 15.5 16-pin SOICW Production EVB MC33812 Single Cylinder Engine Control Integrated Circuit Engine control power IC, with three low-side drivers, one predriver, +5.0 V pre-regulator, IOS-9141 physical interface and MCU watchdog circuit. 2 @ 6.0 1 @ 2.0 2 @ 200 1 @ 1000 Parallel 4.5 to 36 32-pin SOICW Exposed Pad Production EVB Ref. Design MC33813 One Cylinder Small Engine Control IC Engine control analog power IC intended for one cylinder motorcycle and other small engine control applications. Includes ISO9141 communication interface. 1 @ 3.0 1 @ 6.0 2 @ 2.4 1 @ .110 1 @ 400 1 @ 300 2 @ 1500 1 @ 20000 SPI, Parallel 6.0 to 18 48-pin LQFP, Exposed Pad Production EVB MC33814 Two Cylinder Small Engine Control IC Engine control analog power IC intended for two cylinder motorcycle and other small engine control applications. Includes ISO9141 communication interface. 2 @ 3.0 1 @ 6.0 2 @ 2.4 1 @ .110 2 @ 400 1 @ 300 2 @ 1500 1 @ 20000 SPI, Parallel 6.0 to 18 48-pin LQFP, Exposed Pad Production EVB MC33816 Automotive Engine Control IC with Smart Gate Control The 33816 is a 12-channel gate driver IC for automotive engine control applications. The IC consist of five external MOSFET high-side predrivers and seven external MOSFET low-side predrivers. Also contains four independent and concurrent digital microcores SPI Parallel 9.0 to 16 64-pin LQFP Exposed Pad Production FRDM EVB - - MC33899 Programmable H-Bridge Power IC Designed to drive a DC motor in both forward and reverse shaft rotation under Pulse Width Modulation (PWM) of speed and torque. Can be controlled by SPI or parallel control lines. 15.0 90 SPI, Parallel 6.0 to 26.5 30-pin HSOP Production MC33926 5.0A Throttle Control H-Bridge H-Bridge power IC for DC servo motor control like engine throttle control. Load can be PWM’ed up to 20 kHz 8.0 120 Parallel 8.0 to 28 32-pin PQFN Production EVB PT2000 Programmable Solenoid Controller for Automotive/Truck Engine (Direct Injection) Control The PT2000 is a programmable gate driver IC for precision solenoid control applications. The chip integrates six microcores used to control, seven external MOSFET high-side pre-drivers, eight external MOSFET low-side pre-drivers (two of them with higher switching frequency can be used for DC/DC converters), integrated end of injection detection, current measurement, and diagnostics and protection for both high-side and low-side. - - SPI Parallel 5.0 to 36 80-pin LQFP 4Q 2015 FRDM EVB 5.Products available with SPI Control work with the KITUSBSPIEVME and the KITUSBSPIDGLEVME USB-SPI Interface Boards. SG1002 (Selector Guide) (3Q2015) – 14 Engine and DC Motor Control - Automotive Alternator Voltage Regulators Product TC80310 Description Main Characteristics Bus Type Operating Voltage (VDC) Regulation Voltage (VDC) Other Features Diagnostics Protection Features Packaging Status An integrated circuit intended to regulate the output voltage of an automotive alternator. It supplies a current via a high-side MOSFET to the excitation coil of the alternator and provides an internal free-wheeling diode. High-side field driver, Internal freewheeling diode, Up to 8.0 A rotor current (excitation coil), Load response control (LRC), LIN interface, Set point voltage selectable LIN 1.3 8.0 to 27 150 Factory Selectable Features: LRC Rate, LRC disable RPM, Self start, Self start threshold, Alternator Pole pairs, Thermal Fault Threshold, Thermal Compensation Threshold, Phase Sensitivity, Phase Start Regulating RPM, Phase Stop Regulating RPM LIN communication used for Electrical, Mechanical and Thermal fault reporting Load Dump Protection, Thermal protection, Thermal compensation Die Production No of Outputs RDS(on) (m) of Each Output Current Limit Threshold Max (A) Sleep Current Max Control (6) Status/Fault Reporting Protection Features Packaging Status Short-circuit, Current Limit, Overtemperature, Undervoltage 20-pin HSOP Production Engine and DC Motor Control — H-Bridges Product Description Main Characteristics MC33186 H-Bridge Driver (5.0 A) Monolithic H-Bridge ideal for fractional horsepower DC-motor and bi-directional thrust solenoid control. Load can be PWM'ed up to 10 kHz 2 150 7.8 — Parallel Status Flag MC33879 (1.0 RDS(on)) Configurable Eight Output SPI Controlled Switch 8-output hardware configurable, high-side/ low- side switch with 16-bit serial input control using SPI with up to 1.2 A current driving capability 8 750 1.2 5 µA SPI w/2 PWM SPI Short-circuit, Current Limit, 32-pin SOICW Production Overtemperature, Open Exposed Pad EVB load detection, Overvoltage MC33880 Configurable Eight Output SPI Controlled Switch 8-output hardware configurable, high-side/ low- side switch with 16-bit serial input control using SPI with up to 2.0 A current driving capability 8 550 2.0 5 µA SPI w/2 PWM SPI Short-circuit, Current Limit, 32-pin SOICW Production Overtemperature, Open EVB load detection, Overvoltage MC33886 H-Bridge Driver (5.2 A) Monolithic H-Bridge ideal for fractional horsepower DC-motor and bi-directional thrust solenoid control. Load can be PWM'ed up to 10 kHz 2 120 7.8 — Parallel Status Flag Short-circuit, Current Limit, Overtemperature, Undervoltage 20-pin HSOP MC33887 H-Bridge Driver with Sleep Mode and current feedback (5.0 A) Monolithic H-Bridge ideal for fractional horsepower DC-motor and bi-directional thrust solenoid control. Load can be PWM'ed up to 10 kHz 2 120 7.8 50 A Parallel Status Flag Short-circuit, Current Limit, Overtemperature, Undervoltage 20-pin HSOP, Production 36-pin PQFN, EVB 54-pin SOICW Exposed Pad MC33899 Programmable H-Bridge Power IC H-Bridge with SPI based diagnostics and configurability designed to drive a DC motor in both forward and reverse shaft rotation under Pulse Width Modulation (PWM) of speed and torque 2 — 10.6 145 A SPI and Parallel SPI Open Circuit detect, Undervoltage, Overtemperature Shutdown, Output Short-circuit Current Limit 30-pin HSOP Production MC33926 5.0 A Throttle Control H-Bridge H-Bridge power IC for DC servo motor control like engine throttle control. Load can be PWM’ed up to 20 kHz. 2 120 8.0 50 A Parallel Status Flag Output Short-circuit Protect, Overcurrent Limit, Overtemperature 32-pin PQFN Production EVB SG1002 (Selector Guide) (3Q2015) – 15 Production EVB Engine and DC Motor Control — H-Bridges (continued) Product Description Main Characteristics No of Outputs RDS(on) (m) of Each Output Current Limit Threshold Max (A) Sleep Current Max Control (6) Status/Fault Reporting Protection Features Packaging Status MC33931 5.0 A Throttle Control H-Bridge H-Bridge power IC for DC servo motor control like engine throttle control. Load can be PWM'ed up to 11 kHz 2 120 8.0 50 A Parallel Status Flag Output Short-circuit 44-pin HSOP, Production Protect, Overcurrent Limit, 32-pin SOICW EVB Overtemperature with Exposed Pad MC33932 5.0 A Throttle Control Dual H-Bridge H-Bridge power IC for DC servo motor control like engine throttle control. Load can be PWM'ed up to 11 kHz 4 120 8.0 50 A Parallel Status Flag Output Short-circuit 44-pin HSOP, Production Protect, Overcurrent Limit, 54-pin SOICW EVB Overtemperature with Exposed Pad HB2000 10 A H-Bridge, Programmable Brushed DC Motor H-Bridge power IC for brushed DC Driver motor control. Load can be controlled via parallel inputs as well as SPI with advanced diagnostic to meet ISO26262 functional safety standards 2 — SPI selectable 5.1/6.7/8.4/ 10.3 50 A SPI, Parallel SPI, Status Flag Charge pump undervoltage, overvoltage, and undervoltage on VPWR, short to ground and short to VPWR for each output, open load, temperature warning, and overtemperature shutdown 32-pin PQFN 4Q 2015 FRDM EVB Planned HB2001 10 A H-Bridge, Programmable Brushed DC Motor H-Bridge power IC for brushed DC Driver motor control. Load can be controlled via parallel inputs as well as SPI with advanced diagnostic to meet ISO26262 functional safety standards 2 — SPI selectable 5.1/6.7/8.4/ 10.3 50 A SPI, Parallel SPI, Status Flag Charge pump undervoltage, overvoltage, and undervoltage on VPWR, short to ground and short to VPWR for each output, open load, temperature warning, and overtemperature shutdown 32-pin PQFN 4Q 2015 FRDM EVB Planned MC34931 5.0 A H-Bridge Brushed DC Motor Driver, Single, 5-36 V, 5.0 A Automatic thermal back-off; Realtime current output Feedback; Low leakage current 2 120 6.5 20 A Parallel Status Flag Output Short-circuit 32-pin SOICW Protect, Overcurrent Limit, Exposed Pad Overtemperature Production EVB MC34932 5.0 A Dual H-Bridge Brushed DC/Stepper Motor Driver, 5.0-36 V, 5.0 A Automatic thermal back-off; Realtime current output Feedback; Low leakage current 4 120 6.5 20 A Parallel Status Flag Output Short-circuit 54-pin SOICW Protect, Overcurrent Limit, Exposed Pad Overtemperature Production EVB MC34933 Dual H-Bridge Motor Driver, 7.0V, 1.4 A Peak, 200 Monolithic dual H-Bridge driver IC kHZ PWM, for Stepper Motor or two H-Bridges in ultra-small 3X3 mm UQFN package, integrated charge pump and protection 2 400 1.4 1 A Parallel Shutdown Shoot Through Protect, Undervoltage Detect, Thermal detection 16-pin UQFN Production FRDM EVB MPC17C724 Dual H-Bridge Motor Driver, 5.5 V, 0.8 A Peak, 200 kHZ PWM, for Stepper Motor or two HBridges Monolithic dual H-Bridge driver IC in ultra-small 3X3 mm QFN package and 1 uA sleep mode 2 1000 0.8 1.0 A Parallel Shutdown Shoot Through Protect, Undervoltage Detect 16-pin QFN Production FRDM EVB MPC17510 H-Bridge Motor Driver, 15 V, 3.8 A Peak, 200 kHZ PWM, with integrated MOSFET driver Monolithic H-Bridge driver IC with integrated charge pump and protection. Includes unique MOSFET gate drive option. 1 450 3.8 1.0 mA Parallel Shutdown Shoot Through Undervoltage Detect 24-pin TSSOP Production FRDM EVB MPC17511 H-Bridge Motor Driver, 6.8 V, 3.0 A Peak, 200 kHZ Monolithic H-Bridge driver IC with PWM, with integrated MOSFET driver integrated charge pump and protection. Includes unique MOSFET gate drive option. 2 600 3.0 1.0 A Parallel Shutdown Shoot Through Undervoltage Detect 24 pin QFN, 16-pin VMFP Production FRDM EVB MPC17529 Dual H-Bridge Motor Driver, 6.8 V, 1.4 A Peak, 200 kHZ PWM, for Stepper Motor or two HBridges 2 700 1.4 1.0 mA Parallel Shutdown Shoot Through Undervoltage Detect 20-pin VMFP Production FRDM EVB Monolithic dual H-Bridge driver IC with integrated charge pump and protection SG1002 (Selector Guide) (3Q2015) – 16 Engine and DC Motor Control — H-Bridges (continued) Product Description Main Characteristics No of Outputs RDS(on) (m) of Each Output Current Limit Threshold Max (A) Sleep Current Max Control (6) Status/Fault Reporting Protection Features Packaging Status MPC17531 700 mA Dual H-Bridge Motor Driver with 3.0 V Compatible Logic I/O Monolithic dual H-Bridge driver IC with integrated charge pump and protection 4 120 1.4 1.0 A Parallel Shutdown Shoot Through Undervoltage Detect 16-pin VMFP Production FRDM EVB MPC17533 Dual H-Bridge Motor Driver, 6.8 V, 1.4 A Peak, 200 kHZ PWM, for Stepper Motor or two HBridges Monolithic dual H-Bridge driver IC with integrated charge pump and protection, 2 uA sleep mode 2 800 1.4 < 200 A Parallel Shutdown Shoot Through Undervoltage Detect 16-pin VMFP Production FRDM EVB 6.Products available with SPI Control work with the KITUSBSPIEVME and the KITUSBSPIDGLEVME USB-SPI Interface Boards Engine and DC Motor Control - High Current Motor Control Product Description Main Characteristics Power Features MM908E621 DC Motor/Mirror Control and LIN Mirror Control, Integrated Quad Half-bridge and Triple High-side with Embedded MCU and LIN Voltage Regulator 5.0 V/60 mA, LIN Physical Layer with Selectable Slew rates, Window Watchdog, “Normal/Stop/Sleep Mode “Control MM908E622 DC Motor/Mirror Control and LIN Mirror Control, Integrated Quad Half-bridge, Triple High-side and EC Glass Driver with Embedded MCU and LIN Voltage Regulator 5.0 V/60 mA, LIN Physical Layer with Selectable Slew rates, Window Watchdog, “Normal/Stop/Sleep Mode “Control MCU Reference Additional Information Packaging Status 2 x 275 m Half-Bridges; 2 x 750 m Half-Bridges; 1 x 185 m High-side; 2 x 440 m High-side; Switched 5.0 V Output (25 mA) 2/3 Pin Hall Sensor Input, Analog Input with Current Source, 40 V Rated Wake-up Input, VSUP, Chip Temp. and Current Sensing 54-pin SOICW Exposed Pad Production 2 x 275 m Half-bridges; 2 x 750 m Half-bridges; 1 x 185 m High-side; 2 x 440 m High-side; Switched 5.0 V Output (25 mA) EC Glass Driver 2/3 Pin Hall Sensor Input, Analog Input with Current Source, 40 V Rated Wake-up Input, VSUP, Chip Temp. and Current Sensing 54-pin SOICW Exposed Pad Production Operational Amplifier, 2 x 40 V Rated Wake-up Inputs 54-pin SOICW Production EVB 8-bit MCU HC908EY16 MCU Detail HC08 Core, 16 k Flash, 512 Bytes RAM, ESCI, 8-Channel 10-bit ADC, Two 16-bit 2 Channel Timers, Internal Clock Generator MM908E624 DC Motor Control Using Relays (for example, Window Lift, Sun Roof, and Power Seats), Triple High-side Switch with Embedded MCU + Power + LIN Voltage Regulator 5.0 V/50 mA, LIN Physical Layer with Selectable Slew rates, Window Watchdog with Selectable Timing, Normal/Stop/Sleep Mode Control 1 x 7 High-side, 2 x 2.5 High-side Switches for Relay Control MM908E625 Mirror Control, Stepper Motor Control, Door Lock Quad Half-bridge and Single High-side with Embedded MCU and LIN Voltage Regulator 5.0 V/60 mA, LIN Physical Layer with Selectable Slew rates, Timeout Watchdog with Periodic Wake-up Feature, Normal/Stop Mode Control 4 x 400 m Half-bridges with Current Control; 1 x 600 m High-side; Switched 5.0 V Output (25 mA) 3 x 2 Pin Hall Sensor Inputs with Cyclic Wake-up Feature, Analog Input with Current Source, VSUP, Chip Temp. and Current Sensing 54-pin SOICW Exposed Pad Production EVB MM908E626 Stepper Motor Control, Quad Halfbridge with Embedded MCU and LIN Voltage Regulator 5.0 V/60 mA, LIN Physical Layer with Selectable Slew rates. High Temperature use, TJ = 135 °C 4 x 400 m Half-bridges with Current Control; Switched 5.0 V Output (24 mA) VSUP, Chip Temperature and Current Sensing 54-pin SOICW Exposed Pad Production EVB (‘625) SG1002 (Selector Guide) (3Q2015) – 17 Engine and DC Motor Control - Microcontroller (MCU) and Injection Driver Product Description Main Characteristics MCU Reference MCU Detail MM912_P812 S12P MCU and Multifunctional Ignition An engine control IC combining an MCU and Injector Driver System In Package (S12P) and analog control die (MC33812) (SiP) intended for motorcycle and other single/ dual cylinder small engine control applications. 16-bit MCU S12P The MCU S12P has 6 KB RAM, and flash memory size of 96 KB or 128 KB. The S12P family uses many of the same features found on the S12XS family, including error correction code (ECC) on flash memory, a separate data-flash module for diagnostic or data storage, a fast analog-to-digital converter (ATD), and a frequency modulated phase locked loop (IPLL) that improves the electromagnetic compatibility (EMC) performance. Analog functions consists of 100 lead LQFP, Production three integrated low-side Exposed Pad Ref. Design drivers, one pre-driver, a +5.0 V, voltage pre-regulator, an MCU watchdog circuit, an ISO 9141 K-Line interface, and a parallel interface for MCU communication. The three low-side drivers are provided for driving a fuel injector, a lamp or LED, and a relay, another injector or fuel pump. MM912_S812 S12XS MCU and Multifunctional Ignition and Injector Driver System In Package (SiP) 16-bit MCU S12XS The MCU S12XS has 8 KB or 12 KB RAM, and flash memory size of 128 KB or 256 KB. The S12XS family uses many of the same features found on the S12P family, including error correction code (ECC) on flash memory, a separate dataflash module for diagnostic or data storage, a fast analog-todigital converter (ATD), and a frequency modulated phase locked loop (IPLL) that improves the electromagnetic compatibility (EMC) performance. Analog functions consists of 100 lead LQFP, Production three integrated low-side Exposed Pad Ref. Design drivers, one pre-driver, a +5.0 V, voltage pre-regulator, an MCU watchdog circuit, an ISO 9141 K-Line interface, and a parallel interface for MCU communication. The three low-side drivers are provided for driving a fuel injector, a lamp or LED, and a relay, another injector or fuel pump. An engine control IC combining an MCU (S12XS) and analog control die (MC33812) intended for motorcycle and other single/dual cylinder small engine control applications. Additional Features Packaging Status Interface - Audio Codec Product SGTL5000 Description Ultra Low-power Audio Codec Main Characteristics A low-power stereo codec that includes headphones amplifier and is designed to provide a comprehensive audio solution for portable products that require line-in, mic-in, line-out, headphone-out and digital I/O. Operating Power Frequency Voltage (V) Dissipation Band (mW) (KHz) 1.62 to 3.6 <10 .020 to 20 Additional Features Packaging Status PLL clocking; I2S, I2C and SPI communications; 2 internal power supplies; stereo line in; ADC & DAC; Mic/line-in; Integrated Digital Processing 20-pin QFN, 32-pin QFN Production EVB Power Management — Regulators Product Description Main Characteristics MC33730 Switch Mode Power Supply with Multiple Linear Regulators and Power Sequencing Step-down switching regulator (2.0 A), with 3 Programmable Linear Regulators (15 mA, 15 mA, 15 mA) and 2 x 5.0 V sensor supply (100 mA, 100 mA). MC34700 9.0 to 18 V, Quad Output, Integrated MOSFET Power Supply High-efficiency power supply. It features three step-down switching regulators and one low dropout linear regulator. Voltage mode control with external compensation Internal soft-start, and internal power MOSFETs enable Operating Voltage (V) Output Voltages Protection Features Packaging Status 4.5 to 28 4.9 to 5.1 V, 2.0 to 3.3 V, 1.5 to 3.3 V, 1.0 to 5.0 V, 5.0 V Reverse Battery Protect, Undervoltage and Overvoltage Lockout, Reset monitor signals for regulators (4) 32-pin SOICW Exposed Pad Production EVB 9.10 to 18.0 2.0 to 5.25 V 0.7 to 3.6 V 0.7 to 3.6 V 0.7 to 3.6 V Undervoltage, Overcurrent, and Overtemperature protection 32-pin QFN Exposed Pad Production EVB SG1002 (Selector Guide) (3Q2015) – 18 Power Management — Regulators (continued) Product Description Main Characteristics Operating Voltage (V) Features 8(A) or 5(B) buck & boost DC/DC switching regulators, with up to ±2% output voltage accuracy. It provides dynamic voltage scaling on all regulators. It is capable of operating at a switching frequency of up to 2.0 MHz. The 34704 utilizes I2C programmability. 2.7 to 5.5 Output Voltages Protection Features 15.0 V (adj.) @ 30 mA Output Undervoltage & Overvoltage detect, 15.0 V (adj.) @ 60 mA (A Overcurrent limit detection and Shortonly) circuit protect, Thermal limit detect 5.0 V @ 500 mA (A only) 3 - 3.6 V (adj.) @ 300/ 500 mA 1.8 V (adj.) @ 550 mA -9.0 V (adj.) @ 60 mA (A only) Packaging Status 56-pin QFN Exposed Pad Production EVB(A) EVB(B) MC34704 Multiple Channel DC-DC Power Management IC MC34712 Single Synchronous DDR Switch-Mode Synchronous buck switching regulator with adjustable output and regulator (±3.0 A) an accuracy of ±2% and a programmable switch frequency of 200 kHz to 1.0 MHz 3.0 to 6.0 0.7 to 1.35 V Overcurrent limit, Short-circuit protect, Thermal shutdown, Output Overvoltage & Undervoltage detect 24-pin QFN Production EVB MC34713 Single Synchronous Buck Switching regulator (5.0 A) Synchronous buck switching regulator with adjustable output and an accuracy of ±2% and a programmable switch frequency of 200 kHz to 1.0 MHz 3.0 to 6.0 0.7 to 3.6 V Overcurrent limit, Short-circuit protect, Thermal shutdown, Output Overvoltage & Undervoltage detect 24-pin QFN Production EVB MC34716 Dual Synchronous DDR Switch-Mode regulators (5.0 A, ±3.0 A) Synchronous buck switching regulators with adjustable outputs and an accuracy of ±2% and a programmable switch frequency of 200 kHz to 1.0 MHz. 3.0 to 6.0 Chan. 1: 0.7 to 3.6 V, Chan. 2: 0.7 to 1.35 V Overcurrent limit, Short-circuit protect, Thermal shutdown, Output overvoltage & Undervoltage detect 26-pin QFN Production EVB MC34717 Dual Synchronous Buck Switching regulators (5.0 A, 5.0 A) Synchronous buck switching regulators with adjustable outputs and an accuracy of ±2% and a programmable switch frequency of 200 kHz to 1.0 MHz. 3.0 to 6.0 Chan. 1: 0.7 to 3.6 V, Chan. 2: 0.7 to 3.6 V Overcurrent limit, Short-circuit protect, Thermal shutdown, Output Overvoltage & Undervoltage detect 26-pin QFN Production EVB VR500 Power Management Integrated Circuit for QorlQ LS1 networking communications processors Quad buck regulator with up to 4.5 A output and five userprogrammable LDOs 2.8 to 4.5 SW1, 0.625 to 1.875 V ; 4.5 A SW2, 0.625 to 1.975 V ; 1.0 A SW3, 0.625 to 1.975 V ; 2.5 A SW4, operates in VTT mode (50% of SW3) or 0.625 To 1.975 V ; 2.5 A LDO1, 0.80 to 1.55 V, 250 mA LDO2, 1.8 to 3.3 V, 100 mA LDO3, 1.8 to 3.3 V, 350 mA LDO4, 1.8 to 3.3 V, 100 mA LDO5, 1.8 to 3.3 V, 200 mA Thermal protection, Undervoltage detection, V-Regs current limits 56-pin WFQFN Exposed pad Production EVB Power Management - PMICs for i.MX Processors Product Description Main Characteristics MCU Support Operating Voltage (V) Protection Features Light Management Additional Features Packaging Status MC13783 Highly Integrated, High 18 LDOs, 4 buck and 1 boost switching regulators; Li-Ion Tier Power Management battery charging; 2 handset mic & 1 headset mic & Audio IC transmitter amplifiers; Earpiece, loudspeaker and headset receiver amplifiers; 13-bit voice Codec; 16-bit stereo record; 16-bit stereo DAC; multiple charging modes; Dual SPI and Dual SSI interfaces. Single and dual i.MX31 and i.MX27 2.9 to 4.65 Overtemperature, overvoltage, undervoltage 3 zone LED drivers, 3 zone RGB drivers RTC, USB-OTG, CEA936-A Car kit, Dynamic Voltage Scaling (DVS), Coincell, Touchscreen Interface 247-pin BGA, (10x10 mm) Production MC13892 Power Management 18 regulators: 12 LDOs, 4 buck switchers, 2 boost Integrated Circuit (PMIC) switchers; Li-Ion and Coin cell battery charging, single and serial path, SPI, I2C, 10-bit ADC with 8 channels, 3 GPO ADCs, mux and scaling circuitry included. i.MX27, i.MX35, i.MX37, i.MX51 2.55 to 4.65 Overtemperature, overvoltage, overcurrent, shortcircuit 3 zone LED drivers, 3 zone RGB drivers RTC, USB - OTG, Dynamic Voltage Scaling (DVS) 139-pin BGA (7x7 mm), 186 pin BGA (12x12 mm) Production EVB (x2) SG1002 (Selector Guide) (3Q2015) – 19 Power Management - PMICs for i.MX Processors (continued) Product Description Main Characteristics MCU Support Operating Voltage (V) Protection Features Light Management Additional Features Packaging Status i.MX50, i.MX53, i.MX35, i.MX37, i.MX51 3.0 to 4.5 Regulators are overvoltage & undercurrent protected, Thermal limit protect, _ 4 wire Touch Screen, PWM outputs, RTC, Coincell 130-pin MAPBGA (8x8 mm) Production MC34709 Power Management 5 programmable buck converters and 8 low drop out (LDO) Integrated Circuit (PMIC) regulators for primary use with Freescale i.MX series of for i.MX50/53 Families microprocessors, graphics, peripheral and memory devices, as well as other system supplies. MMPF0100 Power Management Integrated Circuit for i.MX6 Series Highly integrated, fully programmable PMIC with 4/ 6 buck regulators, 5.0 V boost regulator, 6 general purpose LDOs, 1 VSNVS LDO/switch and DDR Reference i.MX6 series 3.0 to 4.5 Thermal protection, undervoltage detection, V-Regs. current limits _ Coincell charger, OTP memory, I2C bus, 6 Buck, 1 Boost and 6 LDO V-Regs. 56-pin QFN, (8x8x0.85 mm) Exposed pad (2 Types) Production EVB PRGM MMPF0200 12 Channel Configurable Highly integrated, fully programmable PMIC with 3/ 4 buck Power Management regulators, 5.0 V boost regulator, 6 general purpose LDOs, Integrated Circuit 1 VSNVS LDO/switch and DDR Reference i.MX6 series 2.8 to 4.5 Thermal protection, undervoltage detection, V-Regs. current limits _ Coincell charger, OTP memory, I2C bus, 4 Buck, 1 Boost and 6 LDO V-Regs. 56-pin QFN, (8x8x0.85 mm) Exposed pad Production EVB PRGM PF3000 Power Management Integrated Circuit for i.MX6 and i.MX7 Families Highly integrated, fully programmable PMIC with 3/4 buck regulators, 5.0 V boost regulator, 6 LDOs, 1 VSNVS LDO/ switch and DDR reference i.MX6 series and i.MX7 series 2.8 to 4.5 or 3.7 to 5.5 Thermal protection, undervoltage detection, V-Regs. current limits _ Coincell charger, OTP memory, I2C bus, 4 Buck, 1 Boost and 6 LDO V-Regs. 48-pin QFN, (7x7x0.85 mm) Exposed pad Production FRDM EVB PRGM PF3001 Power Management Integrated Circuit for i.MX6 and i.MX7 Families in “always ON” applications Highly integrated, fully programmable PMIC with 3 buck regulators, 6 LDOs and 1 VSNVS LDO/switch i.MX6 series and 2.8 V to 4.5 V or i.MX7 series 3.7 V to 5.5 V Thermal protection, undervoltage detection, V-Regs. current limits _ Coincell charger, I2C 48-pin QFN, Production bus, 3 Buck, and 6 LDO (7 x7 x 0.85 mm) FRDM EVB V-Regs. Exposed pad PRGM Power Management - System Basis Chip Product Description Main Characteristics Bus Type and Standard Operating Voltage (V) Current Limitation Standby (A) Typ. Max. CAN highspeed, dual wires. 5.5 to 27 60 150 PSI5 5.2 to 20 - - Control and Status Reporting (8) Protection Features Packaging Status Low power modes, remote and local wake-up capabilities SPI Current and thermal protection for CAN and regulator 28-pin SOICW, 48-pin QFN Exposed Pad Production EVB Safing state machine, 9 switch input monitors, 2 config. high/low-side drivers, Power-on-reset, watchdog timer, Squib energy reserve SPI Safing state machine, Scrap mode 64-pin LQFP Exposed Pad Production EVB Ref. Design Fault tolerant Other Features MC33742 System Basis Chip with SBC, Dual VREG, Enhance HS CAN with Bus failure Enhanced High Speed diagnostic capability, 4 wake-up inputs CAN (250 k to 1.0 Mbps) MC33789 Airbag System Basis Chip (SBC) with Power Supply and PSI5 Sensor Interface Air bag control module which monitors battery voltage, sensor status and supplies various voltages to the air bag system. Uses SPI for MCU communication. Uses PSI5 for satellite sensors communication. MC33889 System Basis Chip with Low Speed Fault Tolerant CAN Dual 5.0 V regulators LS CAN, 2 wake-up inputs CAN lowspeed, dual wires 5.5 to 27 60 100 Dual voltage regulator, watchdog, wake input, sleep and stop modes SPI MC33903 System Basis Chip (SBC)-Gen 2-with High Speed CAN & LIN Interfaces High speed CAN and 1 or 2 LIN physical interface. 5.0 or 3.3 V VDD regulator. LIN single wire 5.5 to 27 15 35 Config. I/O, MUX - out, pin compatible with MC33905 “Secured” SPI Overcurrent, 32-pin SOICW Production Overtemperature, Exposed Pad EVB Short-circuit, Undervoltage detect MC33904 System Basis Chip (SBC)-Gen 2-with High Speed CAN Interface High-speed CAN physical interface. 5.0 or 3.3 VDD and VAUX regulators w/current sharing CAN highspeed, dual wires 5.5 to 27 15 35 Config. I/O, MUX - out, pin compatible with MC33905 “Secured” SPI Overcurrent, 32-pin SOICW Production Overtemperature, Exposed Pad EVB(‘905) Short-circuit, Undervoltage detect SG1002 (Selector Guide) (3Q2015) – 20 28-pin SOICW Production EVB Power Management - System Basis Chip (continued) Product Description Main Characteristics Bus Type and Standard Operating Voltage (V) Current Limitation Standby (A) Typ. Max. Other Features Control and Status Reporting (8) Protection Features Packaging Status MC33905 System Basis Chip (SBC)-Gen 2-with High Speed CAN & LIN Interfaces CAN highspeed, dual wires. LIN single wire 5.5 to 27 15 35 Config. I/O, MUX - out, SAFE output, Low power modes w/INT and RST capability. “Secured” SPI Overcurrent, Overtemperature, Short-circuit, Undervoltage detect MC33907 Safe System Basis Chip Multiple switching and linear voltage regulators, built-in CAN highwith Buck and Boost DC/ enhanced high speed CAN interface fulfills the ISO11898-2 speed, dual DC up to 800 mA and -5 standards. wires 5.6 to 40 32 60 Safe Assure product “Secured” SPI Overcurrent, 48-pin LQFP Overtemperature, Exposed Pad Over & Undervoltage detect Production EVB MC33908 Safe System Basis Chip Multiple switching and linear voltage regulators, built-in CAN highwith Buck and Boost DC/ enhanced high speed CAN interface fulfills the ISO11898-2 speed, dual DC up to 1.5 A and -5 standards. wires. 5.6 to 40 32 60 Safe Assure product “Secured” SPI 48-pin LQFP Overcurrent, Overtemperature, Exposed Pad Over & Undervoltage detect Production EVB MC33909 System Basis Chip with CAN, LIN Multiple Switch-to-Ground Interface Two high speed CAN interfaces plus four LINs, compatible CAN highwith specification 2.1 and SAEJ2602-2. Also contains 17 speed, dual switch to ground inputs for switch detection. wires. LIN single wire 3.5 to 27 125 - MC33910 System Basis Chip with High-side Drivers and LIN Physical Interface LIN 2.0 compatible, 5.0 V 60 mA LDO, 2 High-side drivers w/PWM, 1 analog/digital input LIN single wire 5.5 to 18 48 MC33911 System Basis Chip with LIN 2.0 compatible, 5.0 V 60 mA LDO, 1 High-side driver & DC Motor Pre-driver and 2 Low-side drivers w/PWM, 2 analog/digital inputs LIN Physical Interface LIN single wire 5.5 to 18 MC33912 System Basis Chip with LIN 2.0 compatible, 5.0 V 60 mA LDO, DC Motor Pre-driver and 2 High-side drivers & 2 Low-side drivers w/PWM, 4 analog/ Current Sense and LIN digital inputs Physical Interface LIN single wire MC33989 System Basis Chip with High Speed CAN Dual 5.0 V regulators HS CAN, 4 wake-up inputs MC34903 System Basis Chip (SBC)-Gen 2-with High Speed CAN & LIN Interfaces High-speed CAN and one LIN physical interface. 5.0 or 3.3 V VDD regulator. MC34904 System Basis Chip (SBC)-Gen 2-with High Speed CAN Interface MC34905 System Basis Chip (SBC)-Gen 2-with High Speed CAN & LIN Interfaces High speed CAN & 1 or 2 LIN physical interfaces. 5.0 or 3.3 VDD and VAux regulators w/current sharing. 32-pin SOICW Production Exposed Pad, EVB 54-pin SOICW Exposed Pad Watchdog timer, Switched inputs wake-up, Fail safe mode SPI Overvoltage 48-pin LQFP Exposed Pad Production EVB 80 Hall Sensor supply, Configurable Window Watchdog SPI Multiple wake-up sources, LDO Fault Detect, Low Voltage Reset 32-pin LQFP Production EVB (‘912) 48 80 Configurable Window Watchdog SPI Multiple wake-up sources, LDO Fault Detect, Low Voltage Reset 32-pin LQFP Production EVB (‘912) 5.5 to 18 48 80 Hall Sensor supply, Configurable Window Watchdog, Current Sense SPI Multiple wake-up sources, LDO Fault Detect, Low Voltage Reset 32-pin LQFP Production EVB CAN high speed, dual wires 5.5 to 27 80 150 Dual voltage regulator, watchdog, wake input, sleep and stop modes SPI Current limitation, 28-pin SOICW Production Thermal protection EVB LIN single wire 5.5 to 27 15 35 Config. I/O, MUX-out, pin compatible with MC34905. “Secured” SPI Overcurrent, 32-pin SOICW Production Overtemperature, Exposed Pad EVB Short-circuit, Undervoltage detect High-speed CAN physical interface. 5.0 or 3.3 VDD and VAUX regulators with current sharing. CAN highspeed, dual wires 5.5 to 27 15 35 Config. I/O, MUX - out, pin compatible with MC34905. “Secured” SPI Overcurrent, 32-pin SOICW Production Overtemperature, Exposed Pad EVB (‘905) Short-circuit, Undervoltage detect High-speed CAN and one LIN physical interfaces. 5.0 or 3.3 VDD and VAUX regulators with current sharing. CAN highspeed, dual wires. LIN single wire 5.5 to 27 15 35 Config. I/O, MUX-out, SAFE output, Low-power modes with INT and RST capability. “Secured” SPI Overcurrent, 32-pin SOICW Production Overtemperature, Exposed Pad, EVB Short-circuit, Undervoltage detect SG1002 (Selector Guide) (3Q2015) – 21 Power Management - System Basis Chip (continued) Product Description Main Characteristics Bus Type and Standard Operating Voltage (V) Current Limitation Standby (A) Typ. Max. Other Features Control and Status Reporting (8) Protection Features Packaging Status FS6407 Safe System Basis Chip Multiple switching and linear voltage regulators, built-in CAN highwith Buck and Boost DC/ enhanced high speed CAN interface fulfills the ISO11898-2 speed, dual DC up to 800 mA and -5 standards. wires. 5.6 to 40 32 60 SafeAssure product “Secured” SPI Overcurrent, 48-pin LQFP Overtemperature, Exposed Pad Over & Undervoltage detect 4Q 2015 EVB Planned FS6408 Safe System Basis Chip Multiple switching and linear voltage regulators, built-in CAN highwith Buck and Boost DC/ enhanced high speed CAN interface fulfills the ISO11898-2 speed, dual DC up to 1.5 A and -5 standards. wires. 5.6 to 40 32 60 SafeAssure product “Secured” SPI Overcurrent, 48-pin LQFP Overtemperature, Exposed Pad Over & Undervoltage detect 4Q 2015 EVB Planned FS4409 System Basis Chip with DC-DC and Multiple Switch-to-Ground Interface Buck/Boost DC/DC and linear voltage regulators. Single CAN highenhanced high speed CAN interface fulfills the ISO11898-2 speed, dual and -5 standards) plus four LIN's compatible with specifica- wires. LIN tion 2.1 and SAEJ2602-2. Also contains 6 switch to ground single wire inputs. 2.5 to 35 100 200 Multiple source wake-up, 3.3 or 5.0V MCU supply, Watchdog timer, Switched inputs, MUX output SAFE output “Secured” SPI Overcurrent, Overtemperature, Short-circuit, Undervoltage detect 7.Products available with SPI Control work with the KITUSBSPIEVME and the KITUSBSPIDGLEVME USB-SPI Interface Boards. SG1002 (Selector Guide) (3Q2015) – 22 48-pin LQFP Exposed Pad Production EVB (33909) Power Management - LED Drivers Product Description Main Characteristics Operating Voltage (V) Output Voltages Protection Features Packaging Status MC34844 10 Channel LED Backlight Driver with Integrated Power Supply High efficiency LED driver for use in backlighting LCD displays. Capable of driving more than 150 LEDs, in 10 parallel strings, with 50/80 mA per string. Currents in the 10 strings are matched to within ± 2%. Controlled through an I2C bus. Contains an PWM generator for LED dimming. 7.0 to 28 60 V, @ 3.0 A Undervoltage lockout, Overvoltage protection, Overtemperature protect, Overcurrent protection, Output short protect 32-pin QFN Exposed Pad Production EVB (8) MC34845 Low Cost Six Channel LED Backlight Driver with Integrated Power Supply High efficiency LED driver for use in backlighting LCD displays. Capable of driving more up to 16 LEDs in series per channel, programmable LED current from 3mA to 30mA per string. Currents in the 6 strings are matched to within ± 2%. External PWM control. 5.0 to 21 8.0 to 60 V @ 2.1 A Overtemperature shutdown, Overcurrent protection, Undervoltage lockout, Overvoltage protection 24-pin QFN Exposed Pad Production EVB Protection Features Packaging Status Fast Short-circuit Detect, Thermal Shutdown, Overvoltage Shutdown, Inrush Current Limit, Overvoltage Lock Out 20-pin SOICW Production EVB 8.Supporting backlight EVB - KITLEDBKLT16EVBE Power Management - Power over Ethernet (PoE) Product MC34670 Description IEE 802.3af Powered Device with Current Mode Switching Regulator Main Characteristics Operating Voltage (V) Integrated IEEE 802.3af Compliant Interface, Signature Detection and Power Classification Functionality, High Performance Current Mode Switching Regulator Max Current LImit Number of (A) Channels 30 to 60 2.1 1 Radar — ADAS Transceiver Product MR2001 Description Multi-channel 77 GHz Radar Transceiver Chipset Main Characteristics Operating Temp Range (°C) TA= Ambient Temp TB= Backside of Die Temp TB TA Scalable number of transmitter and receiver channels -40 to +125 -— Packaging Status 6x6 mm BGA Production KITRADAR 2001EVM Transceivers — CAN Physical Interface Components Product Description Main Characteristics Bus Type and Standard Operating Voltage (V) Current Limit Standby (A) Typ. Max. Other Features Control and Status Reporting (9) Protection Features Packaging Status CM0902 Dual High-Speed CAN Transceiver The CM0902 is a dual high-speed CAN transceiver device, providing the physical interface between the CAN protocol controller of an MCU and the physical dual wire CAN bus. Both channels are completely independent, featuring CAN bus wake-up on each CAN interface, and TXD dominant timeout functionality Dual CAN HS dual wire 4.5 to 5.5 - 15 CAN bus wake-up, 3.3 or 5.0 V MCU I/O, TXD dominant time-out Parallel High system ESD spec. 14-pin SOICN Production EVB MC33897 Single-Wire CAN Low or high (33.3 kbps or 83.3 kbps) data rates, wake-up capability (GMW3089 v2.3 compatible) Single-wire CAN 6.0 to 27 45 60 Regulator Control Output Waveshaping, Undervoltage lockout and loss of GND 2 Mode Control Pins Thermal shutdown, Current limit 14-pin SOICN Production SG1002 (Selector Guide) (3Q2015) – 23 Transceivers — CAN Physical Interface Components (continued) Product Description Main Characteristics Bus Type and Standard Operating Voltage (V) Current Limit Standby (A) Typ. Max. Other Features Control and Status Reporting (9) Protection Features Packaging Status MC33901 High-Speed CAN Transceiver Single CAN high-speed physical layer provides operation up to 2 Mbps and the physical interface between an MCU and the physical dual wires of the CAN bus. CAN HS dual wire 4.5 to 5.5 - 15 CAN bus wake-up. TXD dominant timeout, 3.3 or 5.0 V MCU I/O Parallel High system ESD spec. 8-pin SOICN Production EVB MC34901 High-Speed CAN Transceiver Single CAN high-speed physical layer provides the physical interface between an MCU and the physical dual wires of the CAN bus.The MC34901 supports longlength CAN node interconnects for industrial applications. CAN HS dual wire 4.5 to 5.5 - 15 CAN bus wake-up, 3.3 or 5.0 V MCU I/O Parallel High system ESD spec. 8-pin SOICN Production EVB 9.Products available with SPI Control work with the KITUSBSPIEVME and the KITUSBSPIDGLEVME USB-SPI Interface Boards. Transceivers — LIN, ISO9141, J1850 Physical Interface Components Product Description Main Characteristics Bus Type and Standard Operating Voltage (V) Current Limitation Standby (A) Typ. Max. Protection Features Packaging Status Additional switching output, DC-DC buck converter, On-chip RC oscillator, integrated frame handler SPI Overvoltage protection, Highcurrent protection, High-temperature detection 24 QFN 2Q 2016 EVB Planned Three different operation modes, Master/Device operation, integrated frame handler SPI Overcurrent protection for the IO link channels Over temperature monitoring and protection Overvoltage protection 48 QFN 4Q 2015 EVB Planned (10) CM3010 IO-Link Device CM3010 includes one fully-featured IOLink channel and one switching output channel. It integrates an advanced power management block consisting of a DC-DC buck pre-regulator followed by an LDO. IO-Link 9.0 to 30 - CM3120 IO-Link Master CM3120 includes two fully-featured IOLink channels which can work in three different operation modes. Circuit integrates an IO-Link frame handler fully compliant with the IO-Link v1.1 specification and which implements most of the IO-Link communication tasks. IO-Link 8.0 to 32 - MC33399 Local Interconnect Network (LIN) Physical Layer Offers speed communication from 1.0 kbps to 20 kbps, and up to 60 kbps for Programming Mode. It supports LIN Protocol Specification 1.3. LIN single wire 7.0 to 18 20 50 Wake-up input pin, control of external voltage regulator Parallel Current limitation, Thermal protection 8-pin SOICN Production EVB MC33660 ISO K Line Serial Link Interface ISO9141 physical interface device ISO9141 8.0 to 18 — 50 Data rates up to 50 kbps Serial Output shortcircuit Thermal protection 8-pin SOICN Production EVB MC33661 eLIN – Enhanced LIN Physical Layer (Local Interconnect Network) Selectable slew rate for operations at 10, 20, 100 kbps; bus short to ground fail safe; excellent EMC behavior. LIN single wire 7.0 to 18 8.0 12 Compatibility with 5.0 V and 3.3 V micros, wakeup input control of external regulator Parallel Current limitation, Thermal protection 8-pin SOICN Production EVB MC33662 LIN 2.1/SAE J2602-2 LIN Physical Layer Transceiver Single wire LIN supports normal baud rates of 10 kbps (J) or 20 kbps (L) and fast rate of 100 kbps LIN single wire 7.0 to 18 6.0 11 Active bus waveshaping, EMI immunity, Local & Remote wake-up Parallel Current limitation, Thermal protection 8-pin SOICN Production EVB MC33663 LIN 2.1 / SAEJ2602-2 Dual LIN Physical Layer Transceivers Integrates two physical layer LIN bus LIN Single-wire, transceivers. The devices offer baud rates SAE J2602-2 of 10 and 20 kbps as well as 100 kbps for test/programming modes. 7.0 to 18 12 36 Active bus waveshaping, EMI immunity, 2 wake-up input pins, Compatibility with 5.0 V and 3.3 V micros Parallel Overtemperature protection, Output short-circuit 14-pin SOICN Production EVB SG1002 (Selector Guide) (3Q2015) – 24 500 Control and Status Reporting Other Features Transceivers — LIN, ISO9141, J1850 Physical Interface Components (continued) Product MC33664 Description Isolated Network High Speed Transceiver Main Characteristics Bus Type and Standard 2.0 Mbps isolated network communication rate, Dual SPI architecture for message confirmation, Robust conducted and radiated immunity with wake-up, 3.3 V and 5.0 V compatible logic thresholds, Engineered for 5.0 meter, 15 node system, Low sleep mode current with automatic bus wake-up, Ultra-low radiated emissions Dual wires Operating Voltage (V) 4.75 to 5.5 (VCC5) 3.1 to 5.5 (VIO) Current Limitation Standby (A) Typ. Max. 30 50 Other Features Control and Status Reporting Protection Features Packaging Status SPI Current limitation on RDTX+ and RDTXTermination and Termination verification of CSB_TX, SCLK_TX, DATA_TX, and CSB_RX, SCLK_RX, DATA_RX 16-pin SOICN 1Q 2016 EVB (10) 3.0 V and 5.0 V compatible, low sleep mode current with automatic bus wake up, current limit protection 10.Products available with SPI Control work with the KITUSBSPIEVME and the KITUSBSPIDGLEVME USB-SPI Interface Boards. Transceivers — Distributed Systems Interface (DSI) Components Product Description Main Characteristics Max Data Rate Operating Temp Range (°C) Bus Sw. Resistance, typ/max () Packaging Status MC33780 Dual DSI Master with Differential Drive Bus controller for two differential DSI channels. SPI port for uC interface. Variable CRC generation and detection, thermal protection, frequency spreading. 150 kbps -40 to +85 n/a 16-pin SOICW Production MC33781 Quad DSI Master with Differential Drive Bus controller for four differential DSI channels. Dual SPI ports for microcontroller and safing interfaces. Variable CRC generation and detection, comprehensive fault detection, thermal protection, frequency spreading 200 kbps -40 to +90 n/a 32-pin SOICW Exposed Pad Production MC33784 DSI Sensor Interface DSI slave device optimized as a sensor interface. Differential bus capability & dual bus switches for improved EMC performance, 2-channel 10-bit ADC, 5.0 V regulated output, 3 configurable logic pins, CRC generation and checking. n/a -40 to +150 3.0/6.0 16-pin SOICN Production MC33789 Airbag System Basis Chip (SBC) with Power Supply and PSI5 Sensor Interface Air bag control module which monitors battery voltage, sensor status and supplies various voltages to the air bag system. Uses SPI for MCU communication. Uses PSI5 for satellite sensors communication. 125 kbps -40 to +125 n/a 64-pin LQFP Exposed Pad Production EVB Ref. Design MC33790 Distributed System Interface (DSI) Physical Interface (DSIP) Dual current-limited waveshaped outputs, current sensing inputs, 3.3 V and 5.0 V 5 - 150 kbps -40 to +85 6.0 16-pin SOICW Production MC33793 DSI Sensor Interface DSI slave device. 5.0 V regulated output, 4 configurable I/O pins (logic I/O or 8-bit ADC), fault tolerant, logic output high current buffer n/a -40 to +125 4.0/8.0 16-pin SOICN Production SG1002 (Selector Guide) (3Q2015) – 25 Product Numbering — Analog Auto and Power Management Devices MC mm FF r xxxx v PP RR FAMILY/ROADMAP PRODUCT CATEGORY MC - Qualified Standard SC - Custom Device PC - Prototype Device MARKET 32 - Consumer 33 - Automotive 34 - Industrial 35 - Medical/Military AR - Alternator Regulators BC - Battery Chargers BM - Battery Management CD - Configurable Detection CM - Communication FS - System Basis Chips GD - Gate Drivers HB - H-Bridge MM - Millimeter wave MR - MMIC Radar PF - Power Fusion SA - Safety Airbag SB - Safety Braking SD - Smoke Detection VR - Voltage Regulator XS - eXtreme switch PACKAGING DESIGNATOR SILICON REVISION (default blank) CORE 0000 (Defined by BU) Legacy product numbering is available in ANALOGPN on www.freescale.com SG1002 (Selector Guide) (3Q2015) – 26 VARIATION (default blank) TAPE AND REEL INDICATOR How to Reach Us: Home Page: freescale.com Web Support: freescale.com/support For current information, please visit freescale.com/analog Freescale and the Freescale logo are trademarks of Freescale Semiconductor, Inc., Reg. U.S. Pat. & Tm. Off. SMARTMOS is a trademark of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. © 2015 Freescale Semiconductor, Inc. SG1002 Q3 2015, Rev. 47 8/2015