Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK HMC3653LP3BE v01.0113 Amplifiers - Linear & Power - SMT HBT GAIN BLOCK MMIC AMPLIFIER, 7 - 15 GHz Typical Applications Features The HMC3653LP3BE is ideal for: High Output IP3: +28 dBm • Point-to-Point Radios Single Positive Supply: +5V • Point-to-Multipoint Radios Low Noise Figure: 4.0 dB [1] • VSAT 12 Lead 3x3 mm SMT Package: 9mm² • LO Driver for HMC Mixers • Military EW & ECM Functional Diagram General Description The HMC3653LP3BE is a HBT Gain Block MMIC amplifier covering 7 GHz to 15 GHz and packaged in a 3x3 mm plastic QFN SMT package. This versatile amplifier can be used as a cascadable IF or RF gain stage in 50 Ohm applications. The HMC3653LP3BE delivers 15 dB gain, and +15 dBm output P1dB with only 4 dB noise figure. Electrical Specifications, TA = +25° C, Vcc =5V, Vpd = 5V Parameter Min. Frequency Range Gain [1] Input Return Loss Output Return Loss Output Third Order Intercept (IP3) (Pout = 0 dBm per tone, 1 MHz spacing) Max. Min. 7-9 10.5 Gain Variation Over Temperature Output Power for 1 dB Compression (P1dB) [1] Typ. Max. Min. 9 - 14 14 12 Typ. Max 14 - 15 15 12 Units GHz 15 dB 0.016 0.016 0.022 dB / °C 14 15 11 dB 8 13 Typ. 8 16 12 26 15 10.5 28 7 dB 13.5 dBm 26 dBm Noise Figure [1] 6 Supply Current 1 (Idd1) 40 55 40 55 40 55 mA Supply Current 2 (Idd2) 4 6 4 6 4 6 mA 4 4 dB [1] Board loss subtracted out 1 For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC3653LP3BE v01.0113 HBT GAIN BLOCK MMIC AMPLIFIER, 7 - 15 GHz Gain & Return Loss Gain vs. Temperature 20 17 16 GAIN (dB) RESPONSE (dB) 10 0 -10 15 14 13 12 -20 11 10 -30 6 8 10 12 14 16 7 8 9 S21 S11 11 +25 C S22 Input Return Loss vs. Temperature 12 13 14 15 +85 C -40 C Output Return Loss vs Temperature 0 0 -5 -5 RESPONSE (dB) RETURN LOSS (dB) 10 FREQUENCY (GHz) FREQUENCY (GHz) -10 -15 -20 -10 -15 -20 -25 -25 -30 7 8 9 10 11 12 13 14 7 15 8 9 +25 C 10 11 12 13 14 15 FREQUENCY (GHz) FREQUENCY (GHz) +85 C -40 C +25 C Noise Figure vs. Temperature +85 C -40 C Amplifiers - Linear & Power - SMT 18 P1dB vs. Temperature 20 10 9 18 7 P1dB (dBm) NOISE FIGURE (dB) 8 6 5 4 16 14 12 3 2 10 1 0 8 7 8 9 10 11 12 13 14 15 7 8 9 +25 C +85 C 10 11 12 13 14 15 FREQUENCY (GHz) FREQUENCY (GHz) -40 C +25 C +85 C -40 C For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 2 HMC3653LP3BE v01.0113 HBT GAIN BLOCK MMIC AMPLIFIER, 7 - 15 GHz 35 20 30 IP3 (dBm) Psat (dBm) Output IP3 vs Temperature 22 18 16 25 20 15 14 10 12 7 8 9 10 11 12 13 14 15 7 8 9 FREQUENCY (GHz) +25 C +85 C -40 C 12 13 14 15 +85 C -40 C Power Compression @ 8 GHz -100 20 Pout (dBm), GAIN (dB), PAE (%) -110 -120 -130 -140 -150 -160 -170 10 10 2 10 3 10 4 10 5 10 6 10 7 10 15 10 5 0 -5 -20 -180 8 -16 -12 OFFSET(Hz) 8 GHz 12 GHz 15 GHz Pout -4 0 4 8 Gain PAE Power Compression @ 14 GHz Pout (dBm), GAIN (dB), PAE (%) 20 15 10 5 0 -5 -20 -8 INPUT POWER (dBm) 20 Pout (dBm), GAIN (dB), PAE (%) 11 +25 C Power Compression @ 11 GHz -17 -14 -11 -8 -5 -2 1 4 7 15 10 5 0 -5 -20 -15 -10 INPUT POWER (dBm) Pout 3 10 FREQUENCY (GHz) Phase Noise @ Pin=0 dBm PHASE NOISE (dBc/Hz) Amplifiers - Linear & Power - SMT Psat vs. Temperature Gain -5 0 5 INPUT POWER (dBm) PAE Pout Gain PAE For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC3653LP3BE v01.0113 HBT GAIN BLOCK MMIC AMPLIFIER, 7 - 15 GHz 0 ISOLATION (dB) -10 -20 -30 -40 -50 7 8 9 10 11 12 13 14 15 FREQUENCY (GHz) +25 C +85 C -40 C Absolute Maximum Ratings Drain Bias Voltage 6 Vdc RF Input Power (RFIN) +12 dBm Channel Temperature 150 °C Continuous Pdiss (T=85 °C) (derate 7.87 mW/ °C Above +85 °C) 512 mW Thermal Resistance (channel to ground paddle) 127 °C/W Storage Temperature -65 to 150 °C Operating Temperature -40 to +85 °C ESD Sensitivity (HBM) Class 1A ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] Amplifiers - Linear & Power - SMT Reverse Isolation 4 HMC3653LP3BE v01.0113 HBT GAIN BLOCK MMIC AMPLIFIER, 7 - 15 GHz Amplifiers - Linear & Power - SMT Outline Drawing Package Information Part Number Package Body Material Lead Finish MSL Rating [2] Package Marking [1] HMC3653 RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 H3653 XXXX [1] 4-Digit lot number XXXX [2] Max peak reflow temperature of 260 °C 5 For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC3653LP3BE v01.0113 HBT GAIN BLOCK MMIC AMPLIFIER, 7 - 15 GHz Pin Descriptions Function Description 1, 3, 4, 5, 6, 7, 9, 11 NC No connection necessary. These pins may be connected to RF/DC ground. Performance will not be affected. 2 RFIN This pin is AC coupled and matched to 50 Ohms. 8 RFOUT This pin is AC coupled and matched to 50 Ohms. 10 Vcc Power supply voltage for the amplifier 12 Vpd Power Control Pin for proper control bias GND Paddle GND Ground Paddle must be connected to RF/DC ground. Interface Schematic For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] Amplifiers - Linear & Power - SMT Pid Number 6 HMC3653LP3BE v01.0113 HBT GAIN BLOCK MMIC AMPLIFIER, 7 - 15 GHz Amplifiers - Linear & Power - SMT Application Circuit 7 For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC3653LP3BE v01.0113 HBT GAIN BLOCK MMIC AMPLIFIER, 7 - 15 GHz Amplifiers - Linear & Power - SMT Evaluation PCB List of Material for Evaluation PCB 113589-HMC3653LP3B-rev D Item Description J1, J4 PCB Mount SMA RF Connector C1 - C2 10 pF Capacitor, 0402 Pkg. C3 - C4 10000 pF Capacitor, 0603 Pkg. C5 -C6 4.7 uF Capacitor, Tantalum. U1 HMC3653LP3BE PCB [2] 111173-1 Evaluation Board 1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 or Arlon 25FR [1] The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 8