Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK HMC479MP86 / 479MP86E v03.0810 AMPLIFIERS - DRIVER & GAIN BLOCK - SMT 8 SiGe HBT GAIN BLOCK MMIC AMPLIFIER, DC - 5 GHz Typical Applications Features The HMC479MP86 / HMC479MP86E is an ideal RF/ IF gain block & LO or PA driver: P1dB Output Power: +18 dBm • Cellular / PCS / 3G Output IP3: +34 dBm • Fixed Wireless & WLAN Cascadable 50 Ohm I/Os • CATV, Cable Modem & DBS Single Supply: +5V to +12V • Microwave Radio & Test Equipment Included in the HMC-DK001 Designer’s Kit Functional Diagram General Description Gain: 15 dB The HMC479MP86 & HMC479MP86E are SiGe Heterojunction Bipolar Transistor (HBT) Gain Block MMIC SMT amplifiers covering DC to 5 GHz. This Micro-P packaged amplifier can be used as a cascadable 50 Ohm RF/IF gain stage as well as a LO or PA driver with up to +21 dBm output power. The HMC479MP86(E) offers 15 dB of gain with a +34 dBm output IP3 at 850 MHz while requiring only 72 mA from a single positive supply. The Darlington feedback pair used results in reduced sensitivity to normal process variations and excellent gain stability over temperature while requiring a minimal number of external bias components. Electrical Specifi cations, Vs= 8.0 V, Rbias= 51 Ohm, TA = +25° C Parameter Gain Gain Variation Over Temperature Input Return Loss Output Return Loss Reverse Isolation Output Power for 1 dB Compression (P1dB) Output Third Order Intercept (IP3) (Pout= 0 dBm per tone, 1 MHz spacing) Noise Figure Supply Current (Icq) DC - 1.0 GHz 1.0 - 2.0 GHz 2.0 - 3.0 GHz 3.0 - 4.0 GHz 4.0 - 5.0 GHz DC - 5 GHz DC - 1.0 GHz 1.0 - 2.0 GHz 2.0 - 4.0 GHz 4.0 - 5.0 GHz DC - 1.0 GHz 1.0 - 3.5 GHz 3.5 - 5.0 GHz DC - 5 GHz 0.5 - 1.0 GHz 1.0 - 2.5 GHz 2.5 - 4.0 GHz 4.0 - 5.0 GHz 0.5 - 1.0 GHz 1.0 - 2.5 GHz 2.5 - 4.0 GHz 4.0 - 5.0 GHz DC - 2.0 GHz 2.0 - 5.0 GHz Min. Typ. 12.5 11.5 10.5 9 7.5 14.5 13 12 11 9.5 0.008 12 16 18 15 18 25 15 18 18.5 17 14 12 34 32 28 25 4.0 4.8 16 13 11 9 72 Max. 0.012 100 Units dB dB dB dB dB dB/ °C dB dB dB dB dB dB dB dB dBm dBm dBm dBm dBm dBm dBm dBm dB dB mA Note: Data taken with broadband bias tee on device output. 8-1 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC479MP86 / 479MP86E v03.0810 SiGe HBT GAIN BLOCK MMIC AMPLIFIER, DC - 5 GHz Gain vs. Temperature 20 15 18 10 16 5 8 14 S21 S11 S22 0 -5 -10 12 10 8 -15 6 -20 4 -25 2 -30 +25 C +85 C -40 C 0 0 1 2 3 4 5 6 7 8 0 1 FREQUENCY (GHz) 2 3 Input Return Loss vs. Temperature 5 6 Output Return Loss vs. Temperature 0 0 -5 +25 C +85 C -40 C RETURN LOSS (dB) -5 RETURN LOSS (dB) 4 FREQUENCY (GHz) +25 C +85 C -40 C -10 -15 -10 -15 -20 -25 -20 -30 -25 -35 0 1 2 3 4 5 6 0 1 FREQUENCY (GHz) 2 3 4 5 6 5 6 FREQUENCY (GHz) Reverse Isolation vs. Temperature Noise Figure vs. Temperature 10 0 8 NOISE FIGURE (dB) REVERSE ISOLATION (dB) 9 -5 +25 C +85 C -40 C -10 -15 AMPLIFIERS - DRIVER & GAIN BLOCK - SMT 20 GAIN (dB) RESPONSE (dB) Broadband Gain & Return Loss +25 C +85 C -40 C 7 6 5 4 3 2 -20 1 0 -25 0 1 2 3 4 FREQUENCY (GHz) 5 6 0 1 2 3 4 FREQUENCY (GHz) For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 8-2 HMC479MP86 / 479MP86E v03.0810 SiGe HBT GAIN BLOCK MMIC AMPLIFIER, DC - 5 GHz P1dB vs. Temperature 22 20 20 18 18 16 16 14 14 Psat (dBm) P1dB (dBm) 22 12 10 8 +25 C +85 C -40 C 6 4 12 10 8 +25 C +85 C -40 C 6 4 2 2 0 0 0 1 2 3 4 5 0 1 2 FREQUENCY (GHz) Gain (dB), P1dB (dBm), Psat (dBm), IP3 (dBm) 35 30 25 +25 C +85 C -40 C 15 0 1 2 4 5 Gain, Power & OIP3 vs. Supply Voltage for Constant Icc= 72 mA @ 850 MHz 40 20 3 FREQUENCY (GHz) Output IP3 vs. Temperature IP3 (dBm) AMPLIFIERS - DRIVER & GAIN BLOCK - SMT 8 Psat vs. Temperature 3 4 5 36 30 24 18 12 Gain P1dB Psat IP3 6 0 5 6 7 8 9 10 11 12 Vs (V) FREQUENCY (GHz) Vcc vs. Icc Over Temperature for Fixed Vs= 8V, RBIAS= 51 Ohms 80 +85 C Icc (mA) 76 +25 C 72 68 -40 C 64 4 4.1 4.2 4.3 4.4 4.5 4.6 4.7 Vcc (V) 8-3 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC479MP86 / 479MP86E v03.0810 SiGe HBT GAIN BLOCK MMIC AMPLIFIER, DC - 5 GHz Absolute Maximum Ratings +6 Vdc Collector Bias Current (Icc) 100 mA RF Input Power (RFIN)(Vcc = +4.3 Vdc) +17 dBm Junction Temperature 150 °C Continuous Pdiss (T = 85 °C) (derate 10.8 mW/°C above 85 °C) 0.702 W Thermal Resistance (junction to lead) 92.6 °C/W Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. 5. THE MICRO-P PACKAGE IS DIMENSIONALLY COMPATIBLE WITH THE “MICRO-X PACKAGE” 8 AMPLIFIERS - DRIVER & GAIN BLOCK - SMT Collector Bias Voltage (Vcc) Package Information Part Number Package Body Material Lead Finish MSL Rating HMC479MP86 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 HMC479MP86E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 Package Marking [1] 479 [2] 479 [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 8-4 HMC479MP86 / 479MP86E v03.0810 SiGe HBT GAIN BLOCK MMIC AMPLIFIER, DC - 5 GHz Pin Descriptions AMPLIFIERS - DRIVER & GAIN BLOCK - SMT 8 Pin Number Function Description Interface Schematic 1 RFIN This pin is DC coupled. An off chip DC blocking capacitor is required. 3 RFOUT RF output and DC Bias (Vcc) for the output stage. 2, 4 GND These pins must be connected to RF/DC ground. Application Circuit Recommended Bias Resistor Values for Icc= 72 mA, Rbias= (Vs - Vcc) / Icc Supply Voltage (Vs) 5V 6V 8V 10V 12V RBIAS VALUE 13 Ω 27 Ω 51 Ω 82 Ω 110 Ω RBIAS POWER RATING 1/8 W 1/4 W 1/2 W 1/2 W 1W Note: 1. External blocking capacitors are required on RFIN and RFOUT. 2. RBIAS provides DC bias stability over temperature. Recommended Component Values for Key Application Frequencies Frequency (MHz) Component 8-5 50 900 1900 2200 2400 3500 5000 L1 270 nH 56 nH 18 nH 18 nH 15 nH 8.2 nH 6.8 nH C1, C2 0.01 μF 100 pF 100 pF 100 pF 100 pF 100 pF 100 pF For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC479MP86 / 479MP86E v03.0810 SiGe HBT GAIN BLOCK MMIC AMPLIFIER, DC - 5 GHz Evaluation PCB List of Materials for Evaluation PCB 107489 [1] Item Description J1 - J2 PCB Mount SMA Connector J3 - J4 DC Pin C1, C2 Capacitor, 0402 Pkg. C3 100 pF Capacitor, 0402 Pkg. C4 1000 pF Capacitor, 0603 Pkg. C5 2.2 μF Capacitor, Tantalum R1 Resistor, 1210 Pkg. L1 Inductor, 0603 Pkg. U1 HMC479MP86 / HMC479MP86E PCB [2] 107087 Evaluation PCB The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. AMPLIFIERS - DRIVER & GAIN BLOCK - SMT 8 [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 8-6