PDF Data Sheet

Analog Devices Welcomes
Hittite Microwave Corporation
NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
www.analog.com
www.hittite.com
THIS PAGE INTENTIONALLY LEFT BLANK
HMC481MP86 / 481MP86E
v03.0810
AMPLIFIERS - DRIVER & GAIN BLOCK - SMT
8
SiGe HBT GAIN BLOCK
MMIC AMPLIFIER, DC - 5 GHz
Typical Applications
Features
The HMC481MP86 / HMC481MP86E is an ideal RF/
IF gain block & LO or PA driver for:
P1dB Output Power: +20 dBm
• Cellular / PCS / 3G
Output IP3: +33 dBm
• Fixed Wireless & WLAN
Cascadable 50 Ohm I/Os
• CATV, Cable Modem & DBS
Single Supply: +6V to +12V
• Microwave Radio& Test Equipment
Included in the HMC-DK001 Designer’s Kit
Functional Diagram
General Description
Gain: 20 dB
The HMC481MP86 & HMC481MP86E are SiGe
Heterojunction Bipolar Transistor (HBT) Gain Block
MMIC SMT amplifiers covering DC to 5 GHz. This
Micro-P packaged amplifier can be used as a cascadable 50 Ohm RF/IF gain stage as well as a LO
or PA driver with up to +21 dBm output power. The
HMC481MP86(E) offers 20 dB of gain with a +33 dBm
output IP3 at 850 MHz while requiring only 74 mA
from a single positive supply. The Darlington feedback
pair used results in reduced sensitivity to normal
process variations and excellent gain stability over
temperature while requiring a minimal number of
external bias components.
Electrical Specifi cations, Vs= 8.0 V, Rbias= 39 Ohm, TA = +25° C
Parameter
Gain
Gain Variation Over Temperature
DC - 1.0 GHz
1.0 - 2.0 GHz
2.0 - 3.0 GHz
3.0 - 4.0 GHz
4.0 - 5.0 GHz
Min.
Typ.
18.5
15.5
12.5
10.5
9.0
20.0
17.0
14.0
12.0
10.5
Max.
Units
dB
dB
dB
dB
dB
DC - 5 GHz
0.008
Input Return Loss
DC - 1.0 GHz
1.0 - 5.0 GHz
13
17
dB
dB
Output Return Loss
DC - 1.0 GHz
1.0 - 4.0 GHz
4.0 - 5.0 GHz
20
25
15
dB
dB
dB
Reverse Isolation
DC - 5 GHz
16
15
14
12
9
0.012
dB/ °C
18
dB
20
18
17
15
12
dBm
dBm
dBm
dBm
dBm
Output Power for 1 dB Compression (P1dB)
0.5 - 1.0 GHz
1.0 - 2.0 GHz
2.0 - 3.0 GHz
3.0 - 4.0 GHz
4.0 - 5.0 GHz
Output Third Order Intercept (IP3)
(Pout= 0 dBm per tone, 1 MHz spacing)
0.5 - 2.0 GHz
2.0 - 3.0 GHz
3.0 - 4.0 GHz
4.0 - 5.0 GHz
33
31
29
26
dBm
dBm
dBm
dBm
Noise Figure
DC - 2.0 GHz
2.0 - 4.0 GHz
4.0 - 5.0 GHz
3.5
4.0
4.5
dB
dB
dB
Supply Current (Icq)
74
85
mA
Note: Data taken with broadband bias tee on device output.
8-1
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC481MP86 / 481MP86E
v03.0810
SiGe HBT GAIN BLOCK
MMIC AMPLIFIER, DC - 5 GHz
Gain vs. Temperature
24
15
20
5
S21
S11
S22
-5
16
12
-15
8
-25
4
-35
8
+25 C
+85 C
-40 C
0
0
1
2
3
4
5
6
7
8
0
1
FREQUENCY (GHz)
4
5
6
Output Return Loss vs. Temperature
0
0
-5
-5
+25 C
+85 C
-40 C
-10
RETURN LOSS (dB)
RETURN LOSS (dB)
3
FREQUENCY (GHz)
Input Return Loss vs. Temperature
-15
-20
-25
+25 C
+85 C
-40 C
-10
-15
-20
-25
-30
-30
-35
0
1
2
3
4
5
6
0
1
FREQUENCY (GHz)
2
3
4
5
6
5
6
FREQUENCY (GHz)
Reverse Isolation vs. Temperature
Noise Figure vs. Temperature
0
10
-5
+25 C
+85 C
-40 C
8
NOISE FIGURE (dB)
REVERSE ISOLATION (dB)
2
+25 C
+85 C
-40 C
-10
-15
-20
AMPLIFIERS - DRIVER & GAIN BLOCK - SMT
25
GAIN (dB)
RESPONSE (dB)
Broadband Gain & Return Loss
6
4
2
-25
0
-30
0
1
2
3
4
FREQUENCY (GHz)
5
6
0
1
2
3
4
FREQUENCY (GHz)
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
8-2
HMC481MP86 / 481MP86E
v03.0810
SiGe HBT GAIN BLOCK
MMIC AMPLIFIER, DC - 5 GHz
P1dB vs. Temperature
20
20
16
16
Psat (dBm)
P1dB (dBm)
24
12
+25 C
+85 C
-40 C
8
12
+25 C
+85 C
-40 C
8
4
4
0
0
0
1
2
3
4
5
0
1
2
FREQUENCY (GHz)
Gain (dB), P1dB (dBm), Psat (dBm), IP3 (dBm)
32
28
+25 C
+85 C
-40 C
20
16
0
1
2
4
5
Gain, Power & Output IP3 vs. Supply
Voltage for Constant Id= 74 mA @ 850 MHz
36
24
3
FREQUENCY (GHz)
Output IP3 vs. Temperature
3
4
5
36
30
24
18
12
Gain
P1dB
Psat
IP3
6
0
6
7
8
FREQUENCY (GHz)
9
10
11
12
Vs (V)
Vcc vs. Icc Over Temperature for
Fixed Vs= 8V, RBIAS= 39 Ohms
Icc (mA)
IP3 (dBm)
AMPLIFIERS - DRIVER & GAIN BLOCK - SMT
8
Psat vs. Temperature
24
84
82
80
78
76
74
72
70
68
66
64
62
60
58
4.8
+85 C
+25 C
-40 C
4.9
5
5.1
5.2
5.3
5.4
5.5
5.6
Vcc (V)
8-3
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC481MP86 / 481MP86E
v03.0810
SiGe HBT GAIN BLOCK
MMIC AMPLIFIER, DC - 5 GHz
Absolute Maximum Ratings
+6 Vdc
Collector Bias Current (Icc)
100 mA
RF Input Power (RFIN)(Vcc = +5.15 Vdc)
+10 dBm
Junction Temperature
150 °C
Continuous Pdiss (T = 85 °C)
(derate 11.6 mW/°C above 85 °C)
0.753 W
Thermal Resistance
(junction to lead)
86.3 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
ESD Sensitivity (HBM)
Class 1A
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND.
5. THE MICRO-P PACKAGE IS DIMENSIONALLY
COMPATIBLE WITH THE “MICRO-X PACKAGE”
8
AMPLIFIERS - DRIVER & GAIN BLOCK - SMT
Collector Bias Voltage (Vcc)
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
HMC481MP86
Low Stress Injection Molded Plastic
Sn/Pb Solder
MSL1
HMC481MP86E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL1
Package Marking
[1]
481
[2]
481
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
8-4
HMC481MP86 / 481MP86E
v03.0810
SiGe HBT GAIN BLOCK
MMIC AMPLIFIER, DC - 5 GHz
Pin Descriptions
AMPLIFIERS - DRIVER & GAIN BLOCK - SMT
8
Pin Number
Function
Description
Interface Schematic
1
RFIN
This pin is DC coupled.
An off chip DC blocking capacitor is required.
3
RFOUT
RF output and DC Bias (Vcc) for the output stage.
2, 4
GND
These pins must be connected to RF/DC ground.
Application Circuit
Recommended Bias Resistor Values
for Icc= 74 mA, Rbias= (Vs - Vcc) / Icc
Supply Voltage (Vs)
6V
8V
10V
12V
RBIAS VALUE
11 Ω
39 Ω
62 Ω
91 Ω
RBIAS POWER RATING
1/8 W
1/4 W
1/2 W
1W
Note:
1. External blocking capacitors are required on
RFIN and RFOUT.
2. RBIAS provides DC bias stability over temperature.
Recommended Component Values for Key Application Frequencies
Frequency (MHz)
Component
8-5
50
900
1900
2200
2400
3500
5000
L1
270 nH
56 nH
18 nH
18 nH
15 nH
8.2 nH
6.8 nH
C1, C2
0.01 μF
100 pF
100 pF
100 pF
100 pF
100 pF
100 pF
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC481MP86 / 481MP86E
v03.0810
SiGe HBT GAIN BLOCK
MMIC AMPLIFIER, DC - 5 GHz
Evaluation PCB
List of Materials for Evaluation PCB 107490 [1]
Item
Description
J1 - J2
PCB Mount SMA Connector
J3 - J4
DC Pin
C1, C2
Capacitor, 0402 Pkg.
C3
100 pF Capacitor, 0402 Pkg.
C4
1000 pF Capacitor, 0603 Pkg.
C5
2.2 μF Capacitor, Tantalum
R1
Resistor, 1210 Pkg.
L1
Inductor, 0603 Pkg.
U1
HMC481MP86 / HMC481MP86E
PCB [2]
107087 Evaluation PCB
The circuit board used in the application should
use RF circuit design techniques. Signal lines
should have 50 Ohm impedance while the package
ground leads should be connected directly to the
ground plane similar to that shown. A sufficient
number of via holes should be used to connect
the top and bottom ground planes. The evaluation
board should be mounted to an appropriate heat
sink. The evaluation circuit board shown is available
from Hittite upon request.
AMPLIFIERS - DRIVER & GAIN BLOCK - SMT
8
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
8-6