NTSV30120CT Very Low Forward Voltage Trench-based Schottky Rectifier Exceptionally Low VF = 0.522 V at IF = 5 A http://onsemi.com Features • Fine Lithography Trench−based Schottky Technology for Very Low • • • • • • Forward Voltage and Low Leakage Fast Switching with Exceptional Temperature Stability Low Power Loss and Lower Operating Temperature Higher Efficiency for Achieving Regulatory Compliance Low Thermal Resistance High Surge Capability This Device is Pb−Free, Halogen Free/BFR Free and is RoHS Compliant PIN CONNECTIONS 1 2, 4 3 4 Typical Applications • Switching Power Supplies including Notebook/Netbook Adapters, • • • • 1 ATX and Flat Panel Display High Frequency and DC−DC Converters Freewheeling and OR−ing Diodes Reverse Battery Protection Instrumentation 2 3 TO−220 CASE 221A STYLE 6 MARKING DIAGRAM Mechanical Characteristics • Case: Epoxy, Molded • Epoxy Meets Flammability Rating UL 94−0 @ 0.125 in • Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable • Lead Temperature for Soldering Purposes: 260°C Maximum for AY WW TSV30120Cx AKA 10 sec A Y WW AKA x G H = Assembly Location = Year = Work Week = Polarity Designator = G or H = Pb−Free Package = Halide−Free Package ORDERING INFORMATION © Semiconductor Components Industries, LLC, 2014 September, 2014 − Rev. 1 1 Device Package NTSV30120CTG TO−220 (Pb−Free) Shipping 50 Units / Rail Publication Order Number: NTSV30120CT/D NTSV30120CT MAXIMUM RATINGS Symbol Value Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Rating VRRM VRWM VR 120 V Average Rectified Forward Current (Rated VR, TC = 115°C) Per Device Per Diode IF(AV) Peak Repetitive Forward Current (Rated VR, Square Wave, 20 kHz, TC = 110°C) Per Device Per Diode IFRM Non-repetitive Peak Surge Current (Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz) IFSM A 30 15 A 60 30 A 100 Operating Junction Temperature TJ −40 to +150 °C Storage Temperature Tstg −40 to +150 °C Voltage Rate of Change (Rated VR) dv/dt 10,000 V/ms Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. THERMAL CHARACTERISTICS Rating Symbol Value RqJC RqJA 2.0 70 Unit °C/W Maximum Thermal Resistance Junction−to−Case Junction−to−Ambient ELECTRICAL CHARACTERISTICS (Per Leg unless otherwise noted) Rating Symbol Maximum Instantaneous Forward Voltage (Note 1) (IF = 5 A, TJ = 25°C) (IF = 7.5 A, TJ = 25°C) (IF = 15 A, TJ = 25°C) Typ Max 0.591 0.677 0.934 − − 1.18 0.522 0.575 0.678 − − 0.92 vF (IF = 5 A, TJ = 125°C) (IF = 7.5 A, TJ = 125°C) (IF = 15 A, TJ = 125°C) Maximum Instantaneous Reverse Current (Note 1) (VR = 90 V, TJ = 25°C) (VR = 90 V, TJ = 125°C) V IR mA mA 7.60 6.70 (Rated dc Voltage, TJ = 25°C) (Rated dc Voltage, TJ = 125°C) Unit 20.1 11.8 800 100 mA mA Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 1. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0% http://onsemi.com 2 NTSV30120CT TYPICAL CHARACTERISTICS 100 TA = 25°C TA = 150°C 10 TA = 125°C 1 IR, INSTANTANEOUS REVERSE CURRENT (mA) iF, INSTANTANEOUS FORWARD CURRENT (A) 100 TA = 125°C 1 0.1 TA = 25°C 0.001 0 0.2 0.4 0.8 0.6 1.0 1.2 1.4 1.6 20 1.8 30 40 50 60 70 80 90 100 110 120 VF, INSTANTANEOUS FORWARD VOLTAGE (V) VR, INSTANTANEOUS REVERSE VOLTAGE (V) Figure 1. Typical Instantaneous Forward Characteristics Figure 2. Typical Reverse Characteristics 10,000 30 RqJC = 1.3°C/W TJ = 25°C IF(AV), AVERAGE FORWARD CURRENT (A) C, JUNCTION CAPACITANCE (pF) 10 0.01 0.1 1000 100 25 dc 20 Square Wave 15 10 5 0 10 0.1 1 10 0 100 20 40 60 80 100 120 VR, REVERSE VOLTAGE (V) TC, CASE TEMPERATURE (°C) Figure 3. Typical Junction Capacitance Figure 4. Current Derating per Leg 60 55 50 30 RqJC = 1.3°C/W dc 45 40 Square Wave 35 30 25 20 15 10 5 0 PF(AV), AVERAGE FORWARD POWER DISSIPATION (W) IF(AV), AVERAGE FORWARD CURRENT (A) TA = 150°C IPK/IAV = IPK/IAV = 10 20 25 140 IPK/IAV = 5 20 Square Wave 15 dc 10 5 TJ = 150°C 0 0 20 40 60 80 100 120 0 140 2 4 6 8 10 12 14 16 18 TC, CASE TEMPERATURE (°C) IF(AV), AVERAGE FORWARD CURRENT (A) Figure 5. Current Derating Figure 6. Forward Power Dissipation http://onsemi.com 3 20 NTSV30120CT TYPICAL CHARACTERISTICS R(t), TYPICAL TRANSIENT THERMAL RESISTANCE (°C/W) 10 1 50% 20% 10% P(pk) 0.1 5% t1 2% 1% t2 DUTY CYCLE, D = t1/t2 Single Pulse 0.01 0.000001 0.00001 0.0001 0.001 0.01 0.1 1 t, PULSE TIME (sec) Figure 7. Typical Transient Thermal Response http://onsemi.com 4 10 100 1000 NTSV30120CT PACKAGE DIMENSIONS TO−220 CASE 221A−09 ISSUE AH −T− B SEATING PLANE C F T S 4 DIM A B C D F G H J K L N Q R S T U V Z A Q 1 2 3 U H K Z L R V NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. J G D INCHES MIN MAX 0.570 0.620 0.380 0.415 0.160 0.190 0.025 0.038 0.142 0.161 0.095 0.105 0.110 0.161 0.014 0.024 0.500 0.562 0.045 0.060 0.190 0.210 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 0.045 ----0.080 MILLIMETERS MIN MAX 14.48 15.75 9.66 10.53 4.07 4.83 0.64 0.96 3.61 4.09 2.42 2.66 2.80 4.10 0.36 0.61 12.70 14.27 1.15 1.52 4.83 5.33 2.54 3.04 2.04 2.79 1.15 1.39 5.97 6.47 0.00 1.27 1.15 ----2.04 N STYLE 6: PIN 1. 2. 3. 4. ANODE CATHODE ANODE CATHODE ON Semiconductor and the are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries. SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 http://onsemi.com 5 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative NTSV30120CT/D