PDF Data Sheet

Analog Devices Welcomes
Hittite Microwave Corporation
NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
www.analog.com
www.hittite.com
THIS PAGE INTENTIONALLY LEFT BLANK
HMC570LC5
v06.0514
MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT
GaAs MMIC I/Q DOWNCONVERTER
17 - 21 GHz
Typical Applications
Features
The HMC570LC5 is ideal for:
10 dB Conversion Gain
• Point-to-Point and Point-to-Multi-Point Radio
Image Rejection: 18 dB
• Military Radar, EW & ELINT
2 LO to RF Isolation: 65 dB
• Satellite Communications
Noise Figure: 3 dB
Input IP3: +2 dBm
32 Lead 5x5mm SMT Package: 25mm²
Functional Diagram
General Description
The HMC570LC5 is a compact GaAs MMIC I/Q
downconverter in a leadless RoHS compliant
SMT package. This device provides a small signal
conversion gain of 10 dB with a noise figure of 3 dB
and 18 dB of image rejection across the frequency
band. The HMC570LC5 utilizes an LNA followed by
an image reject mixer which is driven by an active x2
multiplier. The image reject mixer eliminates the need
for a filter following the LNA, and removes thermal
noise at the image frequency. I and Q mixer outputs
are provided and an external 90° hybrid is needed to
select the required sideband. The HMC570LC5 is a
much smaller alternative to hybrid style image reject
mixer downconverter assemblies, and it eliminates the
need for wire bonding by allowing the use of surface
mount manufacturing techniques.
Electrical Specifications, TA = +25 °C, IF = 100 MHz, LO = +4 dBm, Vdd = 3.5 Vdc*
Parameter
Min.
Typ.
Max.
Min.
Typ.
Max.
Units
Frequency Range, RF
17.7 - 19.7
17 - 21
GHz
Frequency Range, LO
7 - 12
7 - 12
GHz
Frequency Range, IF
DC - 3.5
DC - 3.5
GHz
10
dB
3
dB
22
dB
Conversion Gain (As IRM)
9
Noise Figure
Image Rejection
10
8
3
14
17
14
1 dB Compression (Input)
-5
-4
-10
-5
dBm
2 LO to RF Isolation
55
70
50
60
dB
2 LO to IF Isolation
35
50
35
45
dB
IP3 (Input)
-5
-2
-5
+2
dBm
Amplitude Balance
0.5
0.5
dB
Phase Balance
12
4
Deg
Total Supply Current
125
165
125
165
mA
*Data taken as IRM with external IF Hybrid
1
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC570LC5
v06.0514
GaAs MMIC I/Q DOWNCONVERTER
17 - 21 GHz
Data Taken As IRM With External IF Hybrid
30
15
25
10
5
+25C
+85C
-40C
0
-5
-10
20
15
+25C
+85C
-40C
10
5
0
16
17
18
19
20
21
22
16
17
18
RF FREQUENCY (GHz)
Conversion Gain vs. LO Drive
21
22
0
15
-5
RETURN LOSS (dB)
CONVERSION GAIN (dB)
20
Return Loss
20
10
5
0
0 dBm
+2dBm
+4dBm
+6dBm
+8dBm
-5
-10
-15
RF
LO
-20
-25
-10
16
17
18
19
20
21
6
22
8
10
12
14
16
18
20
22
FREQUENCY (GHz)
RF FREQUENCY (GHz)
Input IP3 vs. LO Drive
Input P1dB vs. Temperature
-1
10
-3
5
-5
0
IP3 (dBm)
P1dB (dBm)
19
RF FREQUENCY (GHz)
MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT
Image Rejection vs. Temperature
20
IMAGE REJECTION (dB)
CONVERSION GAIN (dB)
Conversion Gain vs. Temperature
-7
-9
LO = 0 dBm
LO = +2 dBm
LO = +4 dBm
LO = +6 dBm
LO = +8 dBm
-10
+25C
+85C
-40C
-11
-5
-15
-13
-15
16
17
18
19
20
RF FREQUENCY (GHz)
21
22
-20
16
17
18
19
20
21
22
RF FREQUENCY (GHz)
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
2
HMC570LC5
v06.0514
GaAs MMIC I/Q DOWNCONVERTER
17 - 21 GHz
Quadrature Channel Data Taken Without IF Hybrid
IF Bandwidth*
10
20
RF/IF2
15
10
RF/IF1
-30
RESPONSE (dB)
ISOLATION (dB)
-10
2LO/IF2
-50
2LO/IF1
5
CONVERSION GAIN
RETURN LOSS
0
-5
-10
2LO/RF
-70
-15
-90
16
17
18
19
20
21
-20
0.5
22
1
RF FREQUENCY (GHz)
1.5
2
2.5
3
3.5
21
22
21
22
IF FREQUENCY (GHz)
Amplitude Balance vs. LO Drive
Phase Balance vs. LO Drive
20
2
PHASE BALANCE (degrees)
AMPLITUDE BALANCE (dB)
1.5
1
0.5
0
-0.5
LO = 0 dBm
LO = +2 dBm
LO = +4 dBm
LO = +6 dBm
LO = +8 dBm
-1
-1.5
-2
15
10
5
LO = 0 dBm
LO = +2 dBm
LO = +4 dBm
LO = +6 dBm
LO = +8 dBm
0
-5
16
17
18
19
20
21
16
22
17
RF FREQUENCY (GHz)
19
20
Noise Figure vs. LO Drive,
IF Frequency = 100 MHz
8
6
5
CONVERSION GAIN (dB)
0dBm
+2dBm
+4dBm
+6dBm
+8dBm
6
4
2
0
0.5
18
RF FREQUENCY (GHz)
Noise Figure vs. LO Drive,
LO Frequency = 8.6 GHz
CONVERSION GAIN (dB)
MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT
Isolations
0dBm
+2dBm
+4dBm
+6dBm
+8dBm
4
3
2
1
0
1
1.5
2
2.5
IF FREQUENCY (GHz)
3
3.5
4
16
17
18
19
20
RF FREQUENCY (GHz)
* Conversion gain data taken with external IF hybrid, LO frequency fixed at 8.6 GHz and RF varied
3
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC570LC5
v06.0514
GaAs MMIC I/Q DOWNCONVERTER
17 - 21 GHz
Absolute Maximum Ratings
nLO
mRF
0
RF
2 dBm
1
2
3
4
LO Drive
13 dBm
0
xx
21
25
32
35
Vdd
5.5V
1
32
26
0
25
41
Channel Temperature
175°C
2
54
81
69
61
46
860 mW
3
xx
xx
xx
79
79
Continuous Pdiss (T=85°C)
(derate 9.56 mW/°C above 85°C)
4
xx
xx
xx
xx
xx
Thermal Resistance (RTH)
(channel to package bottom)
104.6 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-55 to +85 °C
ESD Sensitivity (HBM)
Class 1B
RF = 18 GHz @ -20 dBm
LO = 8.5 GHz @ +4 dBm
Data taken without IF hybrid
All values in dBc below IF power level (1RF -2LO = 1 GHz)
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT
MxN Spurious Outputs
4
HMC570LC5
v06.0514
GaAs MMIC I/Q DOWNCONVERTER
17 - 21 GHz
MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT
Outline Drawing
NOTES:
1.. PACKAGE BODY MATERIAL: ALUMINA
2.. LEAD AND GROUND PADDLE PLATING: 30 - 80 MICROINCHES
GOLD OVER 50 MICROINCHES MINIMUM NICKLE
3.. DIMENSIONS ARE IN INCHES [MILLIMETERS]
4.. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
5.. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM
6.. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED
TO PCB RF GROUND
Package Information
Part Number
Package Body Material
Lead Finish
HMC570LC5
Alumina, White
Gold over Nickel
MSL Rating
MSL3
[1]
Package Marking [2]
H570
XXXX
[1] Max peak reflow temperature of 260 °C
[2] 4-Digit lot number XXXX
5
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC570LC5
v06.0514
GaAs MMIC I/Q DOWNCONVERTER
17 - 21 GHz
Pin Descriptions
Function
Description
1
VddLO
Power supply for first stage of LO amplifier.
2, 4 - 6, 8, 9,
12 - 18, 21, 22,
25 - 28, 31, 32
N/C
No connection required. These pins may be connected
to RF/DC ground without affecting performance.
3
VddLO2
Power supply for second stage of LO amplifier.
7
VddRF
Power supply for RF LNA.
10, 19, 24, 29
GND
These pins and ground paddle must be connected to
RF/DC ground.
11
RF
This pin is AC coupled
and matched to 50 Ohms
20
IF2
23
IF1
30
LO
Interface Schematic
This pin is DC coupled for applications not requiring
operation to DC. This port should be DC blocked
externally using a series capacitor whose value has
been chosen to pass the necessary frequency range.
For operation to DC, this pin must not sink / source more
than 3 mA of current or part non-function and possible
failure will result.
This pin is AC coupled
and matched to 50 Ohms.
Typical Application
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT
Pin Number
6
HMC570LC5
v06.0514
GaAs MMIC I/Q DOWNCONVERTER
17 - 21 GHz
MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT
Evaluation PCB
List of Materials for Evaluation PCB 113758 [1]
Item
Description
C1 - C4
Capacitor 0603, 0.01 µF
J1, J4
PCB Mount SMA RF Connector, SRI
J2, J3
PCB Mount SMA Connector, Johnson
J5 - J7
DC Pin
U1
HMC570LC5
PCB [2]
113756 Evaluation Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
7
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation circuit board shown is available from
Hittite upon request.
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC570LC5
v06.0514
MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT
GaAs MMIC I/Q DOWNCONVERTER
17 - 21 GHz
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
8