TE Analog Devices Welcomes Hittite Microwave Corporation O B SO LE NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com TE O B SO LE THIS PAGE INTENTIONALLY LEFT BLANK HMC422MS8 / 422MS8E GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 1.2 - 2.6 GHz Features The HMC422MS8 / HMC422MS8E is ideal for: Integrated LO Amplifier w/ Pdiss <100 mW • MMDS & ISM Conversion Loss / Noise Figure: 8 dB • Wireless Local Loop Low LO Drive: 0 dBm • WirelessLAN Input IP3: +15 dBm • Cellular Infrastructure Single Positive Supply: 3V, 30 mA Functional Diagram General Description TE Typical Applications B SO LE The HMC422MS8 & HMC422MS8E are double balanced mixer ICs with integrated LO amplifiers. This mixer can operate as an upconverter or downconverter between 1.2 GHz and 2.6 GHz. With the integrated LO amplifier, the mixer requires an LO drive level of only 0 dBm, and requires only 30mA from a single positive +3V rail. The mixer has 8 dB of conversion loss, an input P1dB of +8 dBm and an input third order intercept point of +15 dBm at 2 GHz. Electrical Specifications, TA = +25° C O Mixers - SINGLE & DOUBLE BALANCED - SMT v04.0712 IF = 100 MHz LO = 0 dBm & Vdd = 3V Parameter Min. Frequency Range, RF & LO Frequency Range, IF Typ. Units Max. 1.2 - 2.6 GHz DC - 1 GHz Conversion Loss 8 10.5 dB Noise Figure (SSB) 8 10.5 dB LO to RF Isolation 23 30 dB LO to IF Isolation 9 15 - 20 dB RF to IF Isolation 9 15 - 20 dB IP3 (Input) 12 15 dBm 1 dB Compression (Input) 5 8 dBm 37 mA Supply Current (Idd) * Unless otherwise noted, all measurements performed as downconverter, IF= 100 MHz. 1 For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC422MS8 / 422MS8E v04.0712 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 1.2 - 2.6 GHz Isolation @ LO = 0 dBm 0 0 -5 -10 +25 C -40 C +85 C -15 -20 TE -10 RF/IF LO/RF LO/IF -30 -40 -20 1 1.2 1.4 1.6 1.8 2 2.2 2.4 2.6 2.8 1 3 1.5 2 2.5 3 FREQUENCY (GHz) LE FREQUENCY (GHz) Conversion Gain vs. LO Drive Return Loss @ LO = 0 dBm 0 0 -2 dBm 0 dBm +2 dBm +4 dBm +6 dBm -15 -20 1 1.2 1.4 1.6 1.8 2 2.2 2.4 2.6 2.8 RETURN LOSS (dB) -10 B SO CONVERSION GAIN (dB) -5 -5 -10 -15 -20 LO RF -25 -30 1 3 1.5 2 Conversion Gain vs. Vdd @ LO = 0 dBm 3 3.5 4 O IF Bandwidth @ LO = 0 dBm 0 0 -5 -5 RESPONSE (dB) CONVERSION GAIN (dB) 2.5 FREQUENCY (GHz) FREQUENCY (GHz) -10 +2.7V +3.0V +3.3V +5.0V -15 -10 -15 -20 Mixers - SINGLE & DOUBLE BALANCED - SMT ISOLATION (dB) CONVERSION GAIN (dB) Conversion Gain vs. Temperature @ LO = 0 dBm CONVERSION GAIN RETURN LOSS -25 -30 -20 1 1.2 1.4 1.6 1.8 2 2.2 2.4 FREQUENCY (GHz) 2.6 2.8 3 0 0.5 1 1.5 2 FREQUENCY (GHz) For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 2 HMC422MS8 / 422MS8E v04.0712 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 1.2 - 2.6 GHz Upconverter Performance Conversion Gain @ LO = 0 dBm Input P1dB vs. Temperature @ LO = 0 dBm 15 INPUT P1dB (dBm) 11 9 TE -10 -15 7 1 1.2 1.4 1.6 1.8 2 2.2 2.4 2.6 2.8 5 1.4 3 FREQUENCY (GHz) 2.6 -2 dBm 0 dBm +3 dBm 1.6 1.8 2 2.2 2.4 2.6 2.8 3 14 11 +25 C -40 C +85 C 8 5 1.4 1.6 1.8 FREQUENCY (GHz) O MxN Spurious @ IF Port nLO 1 2 3 4 0 XX 2 22 26 41 1 10 0 27 48 57 2 66 60 64 53 73 3 >85 >85 83 69 80 >85 >85 2.2 2.4 2.6 nLO Spur @ RF Port 0 >85 2 FREQUENCY (GHz) Harmonics of LO mRF 4 2.4 17 B SO 5 1.4 2.2 20 17 8 2 LE 20 11 1.8 Input IP3 vs. Temperature @ LO = 0 dBm* Input IP3 vs. LO Drive* 14 1.6 FREQUENCY (GHz) INPUT IP3 (dBm) CONVERSION GAIN (dB) +25 C -40 C +85 C 13 -5 -20 INPUT IP3 (dBm) Mixers - SINGLE & DOUBLE BALANCED - SMT 0 >85 >85 RF = 2.1 GHz @ -10 dBm LO = 2 GHz @ 0 dBm All values in dBc relative to the IF power level. LO Freq. (GHz) 1 2 3 4 1.5 33 14 38 35 1.75 30 16 39 44 2 29 17 45 47 2.25 27 20 50 52 2.5 25 26 49 61 3 22 37 69 72 LO = 0 dBm All values in dBc below input LO level @ RF port. * Two-tone input power= 0 dBm each tone, 1 MHz spacing. 3 For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC422MS8 / 422MS8E v04.0712 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 1.2 - 2.6 GHz Absolute Maximum Ratings RF / IF Input (Vdd = +3V) +13 dBm LO Drive (Vdd = +3V) +13 dBm Vdd +7 Vdc IF DC Current ±10 mA Channel Temperature (Tc) 150 °C Continuous Pdiss (T = 85°C) (Derate 5.8 mW/°C above 85 C) 0.38 W Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C ESD Sensitivity (HBM) Class 1A B SO LE Outline Drawing 1. PACKAGE BODY MATERIAL: LOW STRESS INJECTION MOLDED PLASTIC SILICA AND SILICON IMPREGNATED. O 2. LEAD MATERIAL: COPPER ALLOY 3. LEAD PLATING: 100% MATTE TIN. 4. DIMENSIONS ARE IN INCHES [MILLIMETERS] 5. CHARACTERS TO BE HELVETICA MEDIUM, .030 HIGH, LASER OR WHITE INK, LOCATED APPROXIMATELY AS SHOWN. 6. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 7. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 8. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND Package Information Part Number Package Body Material Lead Finish MSL Rating HMC422MS8 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] HMC422MS8E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] Mixers - SINGLE & DOUBLE BALANCED - SMT TE ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Package Marking [3] H422 XXXX H422 XXXX [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 4 HMC422MS8 / 422MS8E v04.0712 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 1.2 - 2.6 GHz 5 Function Description 1 LO This pin is AC coupled and matched to 50 Ohms. 2, 3, 6, 7 GND Pins must connect to RF ground. 4 Vdd Power supply for the LO Amplifier. One external RF bypass capacitor (10,000 pF) is required. IF This pin is DC coupled. For applications not requiring operation to DC, this port should be DC blocked externally using a series capacitor whose value has been chosen to pass the necessary IF frequency range. For operation to DC, this pin must not source/sink more than 10 mA of current or die non-function and possible die failure will result. 8 LE B SO 5 Interface Schematic TE Pin Number RF This pin is DC coupled and matched to 50 Ohms. O Mixers - SINGLE & DOUBLE BALANCED - SMT Pin Descriptions For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC422MS8 / 422MS8E v04.0712 GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 1.2 - 2.6 GHz O List of Materials for Evaluation PCB 105188 Item Description J1 - J3 PCB Mount SMA RF Connector J4 - J5 DC Pin C1 10k pF Chip Capacitor, 0603 Pkg. U1 HMC422MS8 / HMC422MS8E Mixer PCB [2] 104813 Evaluation PCB, 1.0” x 1.0” [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 [1] The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] Mixers - SINGLE & DOUBLE BALANCED - SMT B SO LE TE Evaluation PCB 6