Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK HMC410AMS8G / 410AMS8GE v00.0410 10 GaAs MMIC DOUBLE-BALANCED HIGH IP3 MIXER, 9 - 15 GHz Typical Applications Features The HMC410AMS8G(E) is ideal for: Conversion Loss: 8 dB • Long Haul Radio Platforms LO/RF Isolation: 40 dB • Microwave Radio LO/IF Isolation: 37 dB • VSAT Input IP3: +24 dBm Mixers - SINGLE & DOUBLE BALANCED - SMT No External Components MSOP8G SMT Package Functional Diagram General Description The HMC410AMS8G(E) is a passive double-balanced high IP3 mixer that operates between 9 and 15 GHz. The HMC410AMS8G(E) operates with LO drive levels between +13 dBm and +19 dBm, and provides 8 dB conversion loss across the entire specified frequency band. These mixers require no external components or bias. Electrical Specifications, TA = +25° C IF = 1.45 GHz LO = +17 dBm Parameter Min. Frequency Range, RF & LO Frequency Range, IF Typ. Units Max. 9 - 15 GHz DC - 2.5 GHz Conversion Loss 8 11 dB Noise Figure (SSB) 8 11 dB LO to RF Isolation 30 40 - 45 dB LO to IF Isolation 30 37 dB RF to IF Isolation 8 17 dB IP3 (Input) 20 24 dBm 1 dB Compression (Input) 11 14 dBm * Unless otherwise noted, all measurements performed as downconverter, IF= 1.45 GHz. 10 - 1 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC410AMS8G / 410AMS8GE v00.0410 GaAs MMIC DOUBLE-BALANCED HIGH IP3 MIXER, 9 - 15 GHz Conversion Gain vs. Temperature @ LO = +17 dBm Isolation @ LO = +17 dBm 0 RF/IF LO/RF LO/IF -10 +25 C -40 C +85 C -15 -30 -40 -50 -20 -60 8 9 10 11 12 13 14 15 16 8 9 10 FREQUENCY (GHz) 12 13 14 15 16 14 15 16 15 16 Return Loss @ LO = +17 dBm 0 0 +11 dBm +13 dBm +15 dBm -5 +17 dBm +19 dBm -5 RETURN LOSS (dB) CONVERSION GAIN (dB) 11 FREQUENCY (GHz) Conversion Gain vs. LO Drive -10 -15 -10 -15 RF LO -20 -25 -20 8 9 10 11 12 13 14 15 8 16 9 10 11 12 13 FREQUENCY (GHz) FREQUENCY (GHz) Upconverter Performance Conversion Gain @ LO = +17 dBm IF Bandwidth @ LO = +17 dBm 0 0 CONVERSION GAIN (dB) -5 RESPONSE (dB) 10 -20 -10 -15 -20 IF CONVERSION GAIN IF RETURN LOSS -25 -30 -5 -10 Mixers - SINGLE & DOUBLE BALANCED - SMT -10 -5 ISOLATION (dB) CONVERSION GAIN (dB) 0 -15 -20 0 0.5 1 1.5 2 FREQUENCY (GHz) 2.5 3 8 9 10 11 12 13 14 FREQUENCY (GHz) For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 10 - 2 HMC410AMS8G / 410AMS8GE v00.0410 GaAs MMIC DOUBLE-BALANCED HIGH IP3 MIXER, 9 - 15 GHz Input IP3 vs. Temperature @ LO = +17 dBm* 35 30 30 P1dB (dBm) 35 25 +15 dBm +17 dBm +19 dBm 20 25 +25 C -40 C +85 C 20 15 15 9 10 11 12 13 14 9 15 10 11 12 13 14 15 14 15 FREQUENCY (GHz) FREQUENCY (GHz) Input P1dB vs. Temperature @ LO = +17 dBm Input IP2 vs. LO Drive * 20 80 75 18 70 65 P1dB (dBm) IP2 (dBm) Mixers - SINGLE & DOUBLE BALANCED - SMT 10 P1dB (dBm) Input IP3 vs. LO Drive* 60 55 50 +25 C -40 C +85 C 14 12 +15 dBm +17 dBm +19 dBm 45 16 40 10 9 10 11 12 13 14 15 9 10 FREQUENCY (GHz) 11 MxN Spurious @ IF Port 0 1 2 0 XX 4 1 15 0 2 85 70 67 3 >90 >90 4 N/A >90 13 Harmonics of LO nLO Spur @ RF Port nLO mRF 12 FREQUENCY (GHz) LO Freq. (GHz) 1 2 3 4 3 4 28 23 N/A 9 34 28 46 60 40 62 46 10.5 37 37 50 69 78 83 12 44 45 46 60 >90 79 >90 13.5 47 46 62 N/A >90 >90 >90 15 40 56 58 N/A 16.5 34 47 51 N/A RF = 14.45 GHz @ -10 dBm LO = 13 GHz @ +17 dBm All values in dBc relative to the IF power level. Measured as downconverter. LO = +17 dBm All values in dBc below input LO level @ RF port. * Two-tone input power = 0 dBm each tone, 1 MHz spacing. 10 - 3 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC410AMS8G / 410AMS8GE v00.0410 GaAs MMIC DOUBLE-BALANCED HIGH IP3 MIXER, 9 - 15 GHz Absolute Maximum Ratings +20 dBm LO Drive +27 dBm IF DC Current ±4 mA Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C ESD Sensitivity (HBM) Class 1A 10 ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish MSL Rating HMC410AMS8G Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] HMC410AMS8GE RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] Mixers - SINGLE & DOUBLE BALANCED - SMT RF / IF Input Package Marking [3] H410A XXXX H410A XXXX [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 10 - 4 HMC410AMS8G / 410AMS8GE v00.0410 GaAs MMIC DOUBLE-BALANCED HIGH IP3 MIXER, 9 - 15 GHz Pin Descriptions Mixers - SINGLE & DOUBLE BALANCED - SMT 10 10 - 5 Pin Number Function Description 1, 8 GND Pins and exposed ground slug must be connected to RF ground. 2 LO This pin is AC coupled and matched to 50 Ohms. 3, 4, 6 N/C The pins are not connected internally; however, all data shown herein was measured with these pins connected to RF/DC ground externally. 5 IF This pin is DC coupled. For applications not requiring operation to DC this port should be DC blocked externally using a series capacitor whose value has been chosen to pass the necessary IF frequency range. For operation to DC, this pin must not source/sink more than 4mA of current or die nonfunction and possible die failure will result. 7 RF This pin is DC coupled and matched to 50 Ohms. Interface Schematic For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC410AMS8G / 410AMS8GE v00.0410 GaAs MMIC DOUBLE-BALANCED HIGH IP3 MIXER, 9 - 15 GHz Evaluation PCB List of Materials for Evaluation PCB 103350 [1] Item Description J1 - J2 PCB Mount SMA RF Connector, SRI J3 PCB Mount SMA Connector, Johnson U1 HMC410AMS8G(E) Mixer PCB [2] 101650 Evaluation Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] Mixers - SINGLE & DOUBLE BALANCED - SMT 10 10 - 6