TE Analog Devices Welcomes Hittite Microwave Corporation O B SO LE NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com TE O B SO LE THIS PAGE INTENTIONALLY LEFT BLANK HMC412AMS8G / 412AMS8GE v02.0614 Typical Applications Features The HMC412AMS8G / HMC412AMS8GE is ideal for: Conversion Loss: 8 dB • Long Haul Radio Platforms Noise Figure: 8 dB • Microwave Radio Input IP3: 19 dBm • VSAT No External Components TE MSOP8G SMT Package General Description Functional Diagram B SO LE The HMC412AMS8G & HMC412AMS8GE are passive double balanced mixers that operate between 9.0 GHz and 15 GHz. The HMC412AMS8G(E) operate with LO drive levels between +9 dBm and +13 dBm, and provides 8 dB conversion loss across the entire specified frequency band. This mixer requires no external components or bias. Electrical Specifications, TA = +25° C, IF = 1.45 GHz, LO = +13 dBm [1] O MIXER - SINGLE & DOUBLE BALANCED - SMT DOUBLE-BALANCED MIXER, 9 - 15 GHz Parameter Min. Typ. Frequency Range, RF & LO 9.0 - 15.0 Frequency Range, IF DC - 2.5 Max. Units GHz GHz Conversion Loss 8 Noise Figure (SSB) 8 dB LO to RF Isolation 44 dB 42 dB LO to IF Isolation 33 11 dB RF to IF Isolation 30 dB IP3 (Input) 19 dBm 11.5 dBm 1 dB Compression (Input) [1] Unless otherwise noted, all measurements performed as downconverter, IF= 1.45 GHz. 1 For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 • Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC412AMS8G / 412AMS8GE v02.0614 DOUBLE-BALANCED MIXER, 9 - 15 GHz Conversion Gain vs. Temperature @ LO = +13 dBm Isolation @ LO = +13 dBm 60 ISOLATION (dB) -10 30 20 -15 10 0 -20 8 9 10 11 12 13 14 15 16 8 10 11 12 13 14 15 16 +85C RF/IF -40C LO/RF LO/IF LE +25C 9 FREQUENCY (GHz) FREQUENCY (GHz) Conversion Gain vs. LO Drive Return Loss @ LO = +13 dBm 0 0 -10 -15 -20 8 9 10 11 12 13 14 15 RETURN LOSS (dB) -5 -5 B SO CONVERSION GAIN (dB) 40 TE CONVERSION GAIN (dB) 50 -5 -10 -15 -20 -25 16 8 9 10 FREQUENCY (GHz) +7 dBm +11 dBm +9 dBm +13 dBm 11 12 13 14 15 16 FREQUENCY (GHz) +15 dBm RF LO Upconverter Performance Conversion Gain @ LO = +13 dBm O IF Bandwidth @ LO = +13 dBm 0 0 MIXER - SINGLE & DOUBLE BALANCED - SMT 0 CONVERSION GAIN (dB) RESPONSE (dB) -5 -10 -15 -20 -25 -30 -5 -10 -15 -20 0 0.5 1 1.5 2 2.5 3 IF FREQUENCY (GHz) CG 8 9 10 11 12 13 14 15 16 FREQUENCY (GHz) IF RL For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 2 HMC412AMS8G / 412AMS8GE v02.0614 DOUBLE-BALANCED MIXER, 9 - 15 GHz Input IP3 vs. Temperature @ LO = +13 dBm [1] 30 25 25 IP3 (dBm) IP3 (dBm) 30 20 20 15 TE 15 10 10 9 10 11 12 13 14 15 16 17 9 FREQUENCY (GHz) 11 12 13 14 15 16 17 FREQUENCY (GHz) +13 dBm Input IP2 vs. LO Drive 10 +15 dBm +25C +85C -40C Input P1dB vs. Temperature @ LO = +13 dBm LE +11 dBm [1] 90 15 14 80 13 50 40 30 9 B SO 60 10 11 12 13 14 15 16 17 P1dB (dBm) 12 70 IP2 (dBm) 11 10 9 8 7 6 5 8 9 10 +11 dBm +13 dBm +15 dBm MxN Spurious @ IF Port 11 12 13 14 15 16 FREQUENCY (GHz) FREQUENCY (GHz) O MIXER - SINGLE & DOUBLE BALANCED - SMT Input IP3 vs. LO Drive [1] +25C +85C -40C Harmonics of LO nLO nLO Spur @ RF Port mRF 0 1 2 3 4 LO Freq. (GHz) 1 2 3 4 0 xx 9 28 41 N/A 9 41 33 56 55 1 34 0 38 37 41 10.5 44 45 57 71 2 >85 >85 71 >85 >85 12 47 52 52 N/A 3 >85 >85 >85 >85 >85 13.5 43 60 60 N/A 4 N/A >85 >85 >85 >85 15 37 63 55 N/A 16.5 32 67 50 N/A RF = 14.45 GHz @ -10 dBm LO = 13 GHz @ +13 dBm All values in dBc relative to the IF. Measured as downconverter. LO = +13 dBm All values in dBc below input LO level @ RF port. [1] Two-tone input power= -10 dBm each tone, 1 MHz spacing. 3 For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC412AMS8G / 412AMS8GE v02.0614 DOUBLE-BALANCED MIXER, 9 - 15 GHz RF/IF Input +24 dBm LO Drive +24 dBm Channel Temperature 150 °C IF DC current ± 4mA Continuous Pdiss ( T = 85°C) (derate 4.3mW / ° C above 85 °C 280 mW Thermal Resistance (channel to ground paddle) 230.5 °C/W Storage Temperature -65 to + 150 °C Operating Temperature -55 to + 85 °C ESD Sensitivity (HBM) Class 1A O B SO LE Outline Drawing TE ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS MIXER - SINGLE & DOUBLE BALANCED - SMT Absolute Maximum Ratings Package Information Part Number Package Body Material Lead Finish MSL Rating HMC412AMS8G Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] HMC412AMS8GE RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] Package Marking [3] H412A XXXX H412A XXXX [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 4 HMC412AMS8G / 412AMS8GE v02.0614 DOUBLE-BALANCED MIXER, 9 - 15 GHz 5 Function Description Pin Schematic 1, 8 GND These pins and the exposed ground paddle must be connected to RF ground. 2 LO This pin is DC coupled and matched to 50 Ohms. 3, 4, 6 N/C These pins are not connected internally. 5 IF This pin is DC coupled. For applications not requiring operation to DC, this port should be DC blocked externally using a series capacitor whose values has been chosen to pass the necessary IF frequency range. For operation to DC, this pin must not source/sink more than 4mA of current or die non-function and possible die failure will result. 7 RF This pin is AC coupled and matched to 50 Ohms. B SO LE TE Pin Number O MIXER - SINGLE & DOUBLE BALANCED - SMT Pin Descriptions For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC412AMS8G / 412AMS8GE v02.0614 DOUBLE-BALANCED MIXER, 9 - 15 GHz O List of Materials for Evaluation PCB 103350 [1] Item Description J1 - J2 PCB Mount SMA RF Connector, SRI J3 PCB Mount SMA Connector, Johnson U1 HMC412AMS8G / HMC412AMS8GE Mixer PCB [2] 101650 Evaluation Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] MIXER - SINGLE & DOUBLE BALANCED - SMT B SO LE TE Evaluation PCB 6