FMC INTERCONNECT BOARD CYUSB3ACC-002 Top View Bottom View FMC INTERCONNECT BOARD CYUSB3ACC-002 1. Connect the EZ-USB® FX3TM Development Kit (CYUBS3KIT-001) to the Xilinx® FPGA board using the FMC interconnect board (CYUSB3ACC-002), as shown below Xilinx FPGA board CYUSB3KIT-001 CYUSB3ACC-002 2. Learn to use FX3 in applications involving Xilinx FPGA with the application note AN65974 - Designing with the EZ-USB FX3 Slave FIFO Interface available at http://www.cypress.com/go/AN65974 For the latest information about this interconnect board and to download the hardware files, visit www.cypress.com/go/CYUSB3ACC-002 For the latest information about EZ-USB FX3 Development Kit (CYUSB3KIT-001) and to download the kit software and hardware files, visit www.cypress.com/go/CYUSB3KIT-001 © 2014 Cypress Semiconductor Corporation. All rights reserved. All trademarks or registered trademarks referenced herein are the properties of their respective owners. Doc.# 001-92794 Rev.**