EZ-USB FX3 USB 3.0 Peripheral Controller Product Overview

CYPRESS
EZ-USB® FX3TM
USB 3.0 Peripheral Controller
P R O D U C T O V E RV I E W
INTRODUCTION
F E AT U R E S
Cypress is the market leader in USB and has shipped over
S uper S peed IT TM WITH FX3 TM
1.2 billion USB controllers. We provide the industry’s most
• Add USB 3.0 capability to any system
comprehensive whole product support including software,
• Upto 32-bits, 100 MHz, parallel General
reference designs and driver suites. With a broad-based USB 3.0 product portfolio,
ENABLE POWERFUL DATA PROCESSING
AND CUSTOMIZATION
Cypress continues to innovate on USB technologies.
EZ-USB® FX3TM is the next-generation USB 3.0 peripheral controller that enables developers
to add USB 3.0 device functionality to any system. FX3 has a fully configurable General
Programmable Interface (GPIF™ II), which can interface with virtually any processor, ASIC,
image sensor or FPGA. GPIF II is an enhanced version of the GPIF in FX2LP™, Cypress’s
flagship USB 2.0 product. It provides easy and glueless connectivity to popular industry
interfaces such as synchronous Slave FIFO, asynchronous SRAM, asynchronous and
synchronous Address Data Multiplexed interface, parallel ATA, etc. The FX3’s programming
flexibility makes it an ideal solution to any USB 3.0 devices.
GPIFTM II
SPI
I2C
I 2S
FX3 Block Diagram
www.cypress.com/fx3
core with upto 512 KB of embedded SRAM
EASY CODE DEVELOPMENT AND
INTEGRATION
• EZ-USB tools: complete solution with silicon,
SDK, APIs, GPIF II Designer GUI and DVK
USB 2.0 OTG COMPLIANCE
• Hi-Speed On-The-Go (HS-OTG) host and
peripheral compliant with On-The-Go
Supplement Version 2.0
USB 3.0
EZ-Dtect
TM
32
End Points
USB 2.0
OTG
512 KB SRAM
ARM9
UART
• Full accessible 32-bits, 200 MHz, ARM9
ADDITIONAL CONNECTIVITY TO
PERIPHERALS
JTAG
µP
ASIC
FPGA
Image Sensor
Programmable Interface (GPIF II)
• Easy connectivity to peripherals such as I2C,
I2S, UART, SPI and GPIOs
To PC
via USB 3.0
IMPROVED BATTERY CHARGING
CAPABILITIES
• Compliant with USB BC v1.1
P R O D U C T O V E RV I E W
EZ- USB FX3 PART DETAILS
Part number
GPIF II
CYUSB3011-BZXC
16-bits, 100 MHz
CYUSB3012-BZXC
32-bits, 100 MHz
CYUSB3013-BZXC
16-bits, 100 MHz
CYUSB3014-BZXC
32-bits, 100 MHz
CYUSB3014-BZXI
32-bits, 100 MHz
Processor
SRAM
OTG Controller
Connectivity Support
Package
Batter y Charging
Operating Temperature
Hi-Speed
I2C, I2S, UART, SPI,
and GPIOs
121-ball
FBGA
USB battery charging
v1.1 compliant
0°C to +70°C
256 KB
ARM9 core
512 KB
- 40°C to +85°C
FX3 EX A MPLE APPLICATIONS
Video Streaming
FX3 can support uncompressed HD video streaming, which is ideal for next-generation webcams, machine vision and surveillance cameras
requiring a high data rate to send raw video data.
Image Sensor
Image Sensor
Image
Processing
FPGA/SoC
To PC over
USB 2.0
FX2
Image
Processing
FPGA/SoC
To PC over
USB 3.0
FX3
EZ-USB FX2 Solution
EZ-USB FX3 Solution
PC Peripherals
Printers, scanners and other multifunction peripherals need to transfer increasingly large amount of data in less time. The EZ-USB FX3, with
a 10x bandwidth increase over USB 2.0, is an ideal solution to support data-rich applications.
SRAM
Raw Data from
Image Sensor
FPGA
FX2
To PC over
USB 2.0
Raw Data from
Image Sensor
FPGA
To PC over
USB 3.0
EEPROM
EEPROM
EZ-USB FX2 Solution
FX3
EZ-USB FX3 Solution
GET STARTED NOW
Go to www.cypress.com/fx3 or email [email protected] for more information on Cypress’s EZ-USB FX3.
To purchase FX3 parts, visit us at www.cypress.com/buyonline. For information on our EZ-USB FX3 development kit, CYUSB3KIT-001,
contact your nearest sales representative.
Cypress Semiconductor Corporation
198 Champion Court, San Jose CA 95134
phone +1 408.943.2600
800.858.1810 (toll-free in U.S.) Press “1” to reach your local sales representative.
© 2012 Cypress Semiconductor Corporation. All rights reserved. All other trademarks are the property of their respective owners.
Doc# 001-73745 Rev*B 0712/STVC/TONE/BENY