ISOCOM LTD ® PART NUMBER MC810/811 COMPONENT ISSUE 2 SPECIFICATION October 2014 Component Specification For Ceramic Hermetically Sealed, Radiation Hard High Speed Transistor Optocoupler M1077 IECQ Further copies of this document may be obtained from: ISOCOM LIMITED WASHINGTON, UK NE38 0AH www.isocom.uk.com For sales enquiries, or further information, please contact our sales office at: Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH Tel: +44 0191 4166 546 Fax: +44 0191 4155 055 ©2007 Copyright reserved to Isocom Limited Page 1 of 10 ISOCOM LTD ® Ceramic Hermetically Sealed, Radiation Hard High Speed Transistor Optocoupler ■ MC810/811 ■ MC810/811/L2 ■ MC810/811/L2S Features Applications ▪ Released to European Standard and Complies to Mil Std ▪ Space Radiation Equipment ▪ Military, high reliability system ▪ Total Ionizing Dose Tested to 1MRad(si) ▪ Medical instruments ▪ Low Input Requirements ▪ Mos, Cmos Applications ▪ Hermetically Sealed ▪ Logic Interfacing ▪ High Isolation Voltage ▪ Data Transmission ▪ 6 Pin TO-5 Metal Can Package ▪ Power Supply ▪ Minimum 100% CTR ▪ Modems Description These devices are single, hermetically sealed optically coupled isolators. Each channel is composed of a Gallium Arsenide infra-red emitting diode and a silicon phototransistor. The MC810 series are being used in environments encounted by space applications. It is manufactured to meet the JANS standard in conjunction with MIL-PRF19500 procedures (please see next page for all other applicable specifications). Package styles for this device include 6 Pin TO-5 Metal Can Package with solder dip option available. These packages have a shield effect to cut off ambient light as they are designed for high density mounting applications. For sales enquiries, or further information, please contact our sales office at: Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH Tel: +44 0191 4166 546 Fax: +44 0191 4155 055 ©2007 Copyright reserved to Isocom Limited Page 2 of 10 ISOCOM LTD ® Standards The following specifications have been included in the manufacturing of this product: Military Compliance Specifications MIL-PRF-19500 – General Specification for Discrete Semiconductor Devices IECQ – M1077 Military Compliance Standards MIL-STD-202 – Test Method Standard Electronic and Electrical Component Parts MIL-STD-883 – Test Method Standard Microcircuits MIL-STD-750 – Test Methods for Semiconductor Devices ISO 9001:2008 – Manufacturing of Optocouplers and Optoelectronic components. Amendment Record Issue 1 – Changed Page 5 - Absolute Maximum Ratings 14/10/2014 For sales enquiries, or further information, please contact our sales office at: Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH Tel: +44 0191 4166 546 Fax: +44 0191 4155 055 ©2007 Copyright reserved to Isocom Limited Page 3 of 10 ISOCOM LTD ® Selection Guide Package Styles and Configuration Options Package Lead Style Channels Common Channel Wiring Isocom Part Number and Options Commercial Defense Screen Level Space Screen Level Standard Gold Plate Finish Solder Dipped 6 pin TO-5 1 MC810/811 MC810/811/L2 MC810/811/L2S Gold Plate Option 20 Functional Diagrams MC810/811 6 pin TO-5 1 Channel Device Marking ISOCOM XXXXXXX XXXX For sales enquiries, or further information, please contact our sales office at: Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH Tel: +44 0191 4166 546 Fax: +44 0191 4155 055 ©2007 Copyright reserved to Isocom Limited Page 4 of 10 Manufacturer Isocom Part Number Date Code (XX year XX week) ISOCOM LTD ® Outline Drawings 0.040(1.02) 6 LEADS 0.0175 (0.445) 45. 0° 0.32 (8.13) 5 3 0.037 (0.935) 6 7 2 1 0.5 (12.70) 0.022 (5.08) 0.031 (0.787) 0.17 (4.32) Absolute Maximum Ratings TA = 25°C U.O.S. Storage Temperature Operating Temperature Lead Soldering Temperature Input-to-Output Isolation Voltage -65°C to +150°C -55°C to +125°C 260°C 1.6mm from case for 10S 1500VDC Reverse Voltage Input Diode Forward DC Current Power Dissipation Collector-Base Voltage Collector-Emitter Voltage Emitter–Base Voltage Collector Current 3V 40mA 80mW 40V 40V 4V 50 mA For sales enquiries, or further information, please contact our sales office at: Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH Tel: +44 0191 4166 546 Fax: +44 0191 4155 055 ©2007 Copyright reserved to Isocom Limited Page 5 of 10 ISOCOM LTD ® Electrical Characteristics Input Diode Electrical Characteristics TA = 25°C U.O.S. Parameter Forward Voltage Symbol VF Reverse Current IR Test Conditions IF = 10mA IF = 10mA -55°C IF = 10mA +125°C VR = 2.0V Min 0.7 0.7 0.7 - Type 1.2 1.3 1.1 - Max 1.8 1.8 1.8 100 Units V V V µA 40 - - V 40 - - V 7 - - V - - 100 100 nA µA 10.0 10.0 7.0 - - 0.3 1500 - 1011 6 20 Vdc Ω µS - 6 20 µS - - 3 µS - - 3 µS Output Detector Electrical Characteristics Collector-Emitter Breakdown Voltage Collector-Base Breakdown Voltage Emitter-Collector Breakdown Voltage Off State Collector Current V(BR)CEO V(BR)CBO V(BR)ECO IC(OFF) IC = 1mA IB = 100μA IE = 100μA VCE = 20v, IF = 0 VCE = 20v, IF = 0, +125°C Coupled Electrical Characteristics On State Collector Current IC(ON) Collector-Emitter Saturation Voltage Isolation Voltage Input to Output Resistance Rise Time Transistor VCE (Sat) V in-out R in-out tr Fall Time Transistor tf Rise Time Photodiode tr Fall Time Photodiode tf VCE = 1.0v, IF = 10 mA VCE = 1.0v, IF = 10 mA -55°C VCE = 1.0v, IF = 10 mA +125°C IC =10.0mA IF = 20mA T = 5s (Note 2) VIO = 500V (Note 2) RL = 100Ohms Vcc = 10V IF = 5mA RL = 100Ohms Vcc = 10V IF = 5mA RL = 100Ohms Vcc = 10V IF = 5mA RL = 100Ohms Vcc = 10V IF = 5mA For sales enquiries, or further information, please contact our sales office at: Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH Tel: +44 0191 4166 546 Fax: +44 0191 4155 055 ©2007 Copyright reserved to Isocom Limited Page 6 of 10 mA V ISOCOM LTD ® GROUP TESTING to MIL-STD 750 GROUP TEST MIL‐STD‐750 Group A SG1 Visual inspection & mechanical dimensions DC static test at 25°C DC static test at 125°C and ‐55°C Method 2071 READ AND RECORD yes yes Dynamic test at 25°C Physical dimensions Solderability Resistance to solvents Thermal Shock Method 2066 Method 2026 Method 1022 Method 1056 Cond. B, 25 cycles yes Method 1051, 100 cycles, ‐55/+125°C Method 1071, Cond. H (fine), Cond. C (gross) Temperature cycling Hermetic seal fine and gross leak Electrical measurement Decap internal visual inspection pre and post 2075 yes Bond strength Method 2037, Cond. D yes SG 4 Die shear Intermittent operation life Method 2017 Method 1037, 1042, Cond D, Tab.5‐5 yes Hermetic seal fine and gross leak Electrical measurement Bond strength Method 1071, Cond. H (fine), Cond. C (gross) pre and post Method 2037, Cond. D yes yes SG 5 Acc. steady‐state operation life Method 1027 Electrical measurement Bond strength pre and post Method 2037, Cond. D yes yes Group C SG 2 Thermal Shock Method 1056, Cond. B, 25 shocks Temperature cycling SG 3 Hermetic seal fine and gross leak Moisture resistance Electrical measurement Mechanical shock Method 1051, Cond. C, ‐55/+125°C , 25 cycles (total 45 cycles including screening) Method 1071, Cond. H (fine), Cond. C (gross) Method 1021 pre and post Method 2016, non‐operating, 1500 G, 0.5 ms, 5 blows in each orientation (X1,Y1,Z1) yes Vibration Constant acceleration Method 2056 Method 2006, at a peak level of 5000 G SG 6 Electrical measurement Steady state operating life Not required as B5 is available on same lot pre and post yes SG2 SG3 SG4 Group B SG 1 SG 2 SG 3 For sales enquiries, or further information, please contact our sales office at: Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH Tel: +44 0191 4166 546 Fax: +44 0191 4155 055 ©2007 Copyright reserved to Isocom Limited Page 7 of 10 ISOCOM LTD ® 100% SCREENING to MIL-STD 750 TEST Internal Visual Sealing (Fine Leak) (Gross Leak) Temp Cycling Const. Acceler PIND Radiography Initial Electrical HTRB Interim Electrical Burn‐In Final Electrical PDA (Fine Leak) (Gross Leak) Solder Dip Fine Leak Gross Leak MIL‐STD‐750 2072 1071, Condition H1 1071, Condition C 1051, Condition B‐55/+125°C, 20 Cycles. 2006, 5000G, Y1 only. 2052, Condition A 2076 125°C, ‐55°C, 25°C 1039 25°C only 1039 125°C, ‐55°C, 25°C Max. 5%, pre/post B1 electrical and delta at RT only 1071, Condition H1 1071, Condition C 1071, Condition H1 1071, Condition C READ AND RECORD? R & R R & R R & R Calculate & R For sales enquiries, or further information, please contact our sales office at: Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH Tel: +44 0191 4166 546 Fax: +44 0191 4155 055 ©2007 Copyright reserved to Isocom Limited Page 8 of 10 ISOCOM LTD ® For sales enquiries, or further information, please contact our sales office at: Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH Tel: +44 0191 4166 546 Fax: +44 0191 4155 055 ©2007 Copyright reserved to Isocom Limited Page 9 of 10 ISOCOM LTD ® For sales enquiries, or further information, please contact our sales office at: Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH Tel: +44 0191 4166 546 Fax: +44 0191 4155 055 ©2007 Copyright reserved to Isocom Limited Page 10 of 10