CS3031 Zero Crossing TRIAC Optocoupler

ISOCOM LTD
®
PART NUMBER
CS3031/3032/3033
COMPONENT
ISSUE 1
SPECIFICATION
October 2013
Component Specification
For Ceramic Hermetically Sealed, Radiation Hard
Zero Crossing Triac Optocoupler
BS9000
M1077 IECQ
1077/M
Further copies of this document may be obtained from:
ISOCOM LIMITED
WASHINGTON, UK
NE38 0AH
www.isocom.uk.com
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055
©2007 Copyright reserved to Isocom Limited
Page 1 of 10
ISOCOM LTD
®
Ceramic Hermetically Sealed, Radiation Hard
Zero Crossing Triac Optocoupler
■ CS3031/3032/3033
■ CS3031/3032/3033/L2
■ CS3031/3032/3033/L2S
Features
Applications
▪ Released to European Standard and complies to Mil Std
▪ Space Radiation Equipment
▪ Hermetically Sealed
▪ Military, high reliability system
▪ High Isolation 1500Vdc
▪ Medical instruments
▪ 6 Pin Dual In Line Package
▪ Power Supply
▪ 250V High Breakdown Voltage
▪ Zero Crossing Voltage
Description
These devices are single, hermetically sealed optically coupled isolators. The channel is composed of a Gallium Arsenide
infra-red emitting diode coupled to a silicon detector performing the function of a zero voltage crossing bilateral triac
driver. The CS3031 series is being used in environments encounted by space applications. It is manufactured to JANS
standard in conjunction with MIL-PRF-19500 procedures (please see next page for all other applicable specifications).
Package styles for this device include 6 Pin DIL Package with surface mount, solder dip option available.
Therefore absolute maximum ratings, recommended operating conditions, electrical specifications and performance
characteristics are identical for all units. Any exceptions, due to packaging variations and limitations, are as noted.
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055
©2007 Copyright reserved to Isocom Limited
Page 2 of 10
ISOCOM LTD
®
Standards
The following specifications have been included in the manufacturing of this product:
Military Compliance Specifications
MIL-PRF-19500 – General Specification for Discrete Semiconductor Devices
IECQ – M1077
Military Compliance Standards
MIL-STD-202 – Test Method Standard Electronic and Electrical Component Parts
MIL-STD-883 – Test Method Standard Microcircuits
MIL-STD-750 – Test Methods for Semiconductor Devices
ISO 9001:2008 – Manufacturing of Optocouplers and Optoelectronic components.
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055
©2007 Copyright reserved to Isocom Limited
Page 3 of 10
ISOCOM LTD
®
Selection Guide Package Styles and Configuration Options
Package
6 pin DIL
Lead Style
Channels
Common Channel Wiring
Isocom Part Number and Options
Commercial
Defense Screen Level
Space Screen Level
Standard Gold Plate Finish
Butt Joint
Solder Dipped
Gull Wing
Butt Joint
1
CS3031/3032/3033
CS3031/3032/3033/L2
CS3031/3032/3033/L2S
Gold Plate
Option 10
Option 20
Option 30
Option 60
Functional Diagrams
CS3031/3032/3030
6 pin DIL
1 Channel
Device Marking
ISOCOM
XXXXXXX
XXXX
Outline Drawings
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055
©2007 Copyright reserved to Isocom Limited
Page 4 of 10
Manufacturer
Isocom Part Number
Date Code (XX year XX week)
ISOCOM LTD
®
Hermetic Optocoupler Options
Option
10
Description
Surface mountable hermetic optocoupler with leads trimmed for butt joint assembly. This option is
available on commercial hi-rel product in 6, 8 and 16 pin DIP
4.32 (0.17)
Max
0.51 (0.02)
Min
1.14 (0.045)
1.40 (0.055)
2.29 (0.09)
2.79 (0.11)
0.51 (0.02)
Max
4.32 (0.17)
Max
0.51 (0.2)
Min
2.29 (0.09)
2.79 (0.11)
0.51 (0.02)
Max
0.2 (0.008)
0.33 (0.013)
7.36 (0.29)
7.87 (0.31)
1.14 (0.045)
1.40 (0.055)
20
30
Surface mountable hermetic optocoupler with leads cut and bent for gull wing assembly. This option is
available on commercial and hi-rel product in 6, 8 and 16 pin DIP.
4.57 (0.18)
Max
0.51 (0.02)
Min
2.29 (0.9)
2.79 (0.11)
5 deg
4.57 (0.18) Max
Max
0.51 (0.02)
Min
2.29 (0.09)
2.79 (0.11)
60
1.4 (0.055)
1.65 (0.065)
0.51 (0.02)
Max
4.57 (0.18)
Max
0.2 (0.008)
0.33 (0.013)
1.4 (0.055)
1.65 (0.065)
0.51 (0.02)
Max
9.65 (0.38)
9.91 (0.39)
Surface mountable hermetic optocoupler with leads trimmed for butt joint assembly. This option is
available on commercial hi-rel product in 6, 8 and 16 pin DIP
3.81 (0.15)
Min
0.51 (0.02)
Min
2.29 (0.09)
2.79 (0.11)
3.81 (0.15)
Max
0.2 (0.008)
0.33 (0.013)
7.36 (0.29)
7.87 (0.31)
1.14 (0.045)
1.25 (0.049)
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055
©2007 Copyright reserved to Isocom Limited
Page 5 of 10
0.51 (0.02)
Min
2.29 (0.09)
2.79 (0.11)
1.02 (0.04)
Typ
ISOCOM LTD
®
Absolute Maximum Ratings
TA = 25°C U.O.S.
Storage Temperature
Operating Temperature
Normal Temperature Range (No Derating)
Lead Soldering Temperature
Input-to-Output Isolation Voltage (Peak)
-40°C to +150°C
-40°C to +85°C
-55°C to +50°C
260°C 1.6mm from case for 10S
1500V (60Hz, 5 sec duration)
Input Diode
Forward DC Current
Reverse DC Voltage
Power Dissipation
60mA
3V
120mW
Derate linearly above 25°C at 1.33mW/°C.
250V
100mA
1.2A
150mW
250mW
P.W. = 10m.Sec
Derate linearly above 25°C at 4.0mW/°C
Derate linearly above 25°C at 4.4mW/°C
Output Photo Triac
Off-State Output Terminal Voltage
RMS Forward Current
Forward Current (Peak)
Power Dissipation
Total Power Dissipation
Electrical Characteristics
TA = 25°C U.O.S.
Input Diode Electrical Characteristics
Parameter
Forward Voltage
Reverse Current
Symbol
VF
IR
Test Conditions
IF = 30mA
VR= 3.0V
Min
-
Typ
1.5
-
Max
1.8
100
Units
V
µA
Output Photo-SCR Characteristics
Peak Off-State Current
Peak Blocking Voltage
On-State Voltage
Critical rate of rise of commutating
Off-state Voltage
IDRM
VDRM
VTM
dv/dt(C)
VDRM= 250V
IDRM= 100nA
ITM= 100mA(Peak)
250
1000
1.8
2000
100
3.0
-
nA
V
V
V/µS
IFT
Main Terminal Voltage = 3V CS3031
Main Terminal Voltage = 3V CS3032
Main Terminal Voltage = 3V CS3033
1500
100
-
15
10
5
-
mA
mA
mA
µA
Vac
VIH
IF = Rated IFM; MT-1,MT-2 voltage
above which the device will not
trigger.
IF= Rated IFT, VDRM= 250V, Off-State
5
20
V
-
500
µA
Coupled Electrical Characteristics
Input Current to Trigger
Holding Current, either Direction
Input-to-Output Isolation Voltage
Zero Crossing Characteristics
Inhibit Voltage
Leakage in Inhibited State
IR
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055
©2007 Copyright reserved to Isocom Limited
Page 6 of 10
-
ISOCOM LTD
®
GROUP TESTING to MIL-STD 750
GROUP
Group A
SG1
SG2
SG3
SG4
Group B
SG 1
SG 2
SG 3
TEST
MIL-STD-750
Visual inspection & mechanical
dimensions
DC static test at 25°C
DC static test at 125°C and ‐55°C
Dynamic test at 25°C
Method 2071
Physical dimensions
Solderability
Resistance to solvents
Thermal Shock
Electrical measurement
Bond strength
Acc. steady‐state operation life
Method 2066
Method 2026
Method 1022
Method 1056 Cond. B,
25 cycles
Method 1051, 100
cycles, -55/+125°C
Method 1071, Cond. H
(fine), Cond. C (gross)
pre and post
2075
Method 2037, Cond. D
Method 2017
Method 1037, 1042,
Cond D, Tab.5-5
Method 1071, Cond. H
(fine), Cond. C (gross)
pre and post
Method 2037, Cond. D
Method 1027
Electrical measurement
Bond strength
pre and post
Method 2037, Cond. D
Thermal Shock
Method 1056, Cond. B,
25 shocks
Method 1051, Cond. C,
‐55/+125°C , 25 cycles
(total 45 cycles
including screening)
Method 1071, Cond. H
(fine), Cond. C (gross)
Method 1021
pre and post
Method 2016,
non‐operating, 1500 G,
0.5 ms, 5 blows in each
orientation (X1,Y1,Z1)
Method 2056
Method 2006, at a peak
level of 5000 G
pre and post
Temperature cycling
Hermetic seal fine and gross leak
SG 4
Electrical measurement
Decap internal visual inspection
Bond strength
Die shear
Intermittent operation life
Hermetic seal fine and gross leak
SG 5
Group C
SG 2
Temperature cycling
Hermetic seal fine and gross leak
SG 3
Moisture resistance
Electrical measurement
Mechanical shock
Vibration
Constant acceleration
SG 6
Electrical measurement
Steady state operating life Not
required as B5 is available on same
lot
yes
yes
yes
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055
©2007 Copyright reserved to Isocom Limited
Page 7 of 10
READ AND
RECORD
yes
yes
yes
yes
yes
yes
yes
yes
yes
ISOCOM LTD
®
100% SCREENING to MIL-STD 750
TEST
MIL-STD-750
Internal Visual
2072
READ AND RECORD?
Sealing
(Fine Leak)
(Gross Leak)
Temp Cycling
Const. Acceler
PIND
Radiography
Initial Electrical
HTRB
Interim Electrical
Burn-In
Final Electrical
PDA
(Fine Leak)
(Gross Leak)
1071, Condition H1
1071, Condition C
1051, Condition
B‐55/+125°C, 20 Cycles.
2006, 5000G, Y1 only.
2052, Condition A
2076
125°C, ‐55°C, 25°C
1039
25°C only
1039
125°C, ‐55°C, 25°C
Max. 5%, pre/post B1
electrical and delta at RT
only
1071, Condition H1
1071, Condition C
Solder Dip
Fine Leak
Gross Leak
1071, Condition H1
1071, Condition C
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055
©2007 Copyright reserved to Isocom Limited
Page 8 of 10
R&R
R&R
R&R
Calculate & R
ISOCOM LTD
®
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055
©2007 Copyright reserved to Isocom Limited
Page 9 of 10
ISOCOM LTD
®
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055
©2007 Copyright reserved to Isocom Limited
Page 10 of 10