WILLAS FM120-M+ DTA123JE THRU PNP Digital Transistor FM1200-M 1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS -20V- 200V Pb Free Produc SOD-123+ PACKAGE Package outline Features • Batch process design, excellent power dissipation offers better reverse leakage current and thermal resistance. • Low profile surface mounted application in order to Features optimize board space. • SOD-123H Pb-Free package is available • Low power loss, high efficiency. RoHS• High product forcapability, packinglow code suffix ”G”drop. current forward voltage • High surge capability. Halogen free product for packing code suffix “H” SOT-523 0.146(3.7) 0.130(3.3) • Guardring for overvoltage protection. Epoxy• meets UL 94 V-0 flammability rating Ultra high-speed switching. Moisure Sensitivity Level 1 chip, metal silicon junction. epitaxial planar • Silicon Built-in• Lead-free bias resistors the configuration of an parts enable meet environmental standards of inverter circuit /228 input resistors without MIL-STD-19500 connecting external productconsist for packing code suffixresistors "G" • RoHS The bias resistors of thin-film with complete Halogen free product for packing code "H"They also have the isolation to allow negative biasing of thesuffix input. Mechanical data eliminating parasitic effects. advantage of almost completely Only the on/off conditions need toretardant be set for operation, making : UL94-V0 rated flame • Epoxy device• design easy Case : Molded plastic, SOD-123H • • 0.071(1.8) 0.056(1.4) .067(1.70) .059(1.50) .035(0.90) .028(0.70) • • • 0.012(0.3) Typ. 0.040(1.0) 0.024(0.6) .014(0.35) 0.031(0.8) Typ. .010(0.25) 0.031(0.8) Typ. , Absolute• maximum ratings @ 25к Terminals :Plated terminals, solderable per MIL-STD-750 .043(1.10) Single phase half wave, 60Hz, resistive of inductive load. For capacitive load, derate current by 20% SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-M Symbol Parameter Min Typ Marking Code --VI(off) -0.5 Input voltage (VCC=-5V, IO=-100A) Maximum Recurrent Peak Voltage V (VReverse ---VRRM --I(on) O=-0.3V, IO=-5mA) VMaximum Output voltage = (IO/II -5mA/-0.25mA ---VRMS --O(on) RMS Voltage II = Input current (VI -5V) ----Maximum DC Blocking Voltage VDC IO(off) Output current (VCC= =-50V, VI 0) ----Maximum Average Forward Rectified GI DC current gain (V = ICurrent 80 IO --O=-5V, O -10mA) R1 Input resistance 1.54 2.2 Forward Surge Current 8.3 ms single half sine-wave RPeak Resistance ratio 17IFSM 21 2/R1 superimposed on ratedfrequency load (JEDEC method) Transition fT --250 (VO=-10V, IO=5mA, f=100MHz) Typical Thermal Resistance (Note 2) RΘJA Typical Junction Capacitance (Note 1) CJ Operating Temperature Range TJ Storage Temperature Range Max 12 --20 -1.1 14 -0.3 -3.6 20 -0.5 --2.86 26 --- Unit 13 V 30 V 21 V mA 30 A MHz 18 80 28 35 42 56 40 50 60 -55 to +125 10 100 .008(0.20)70 .004(0.10) 80 100 115 150 120 200 105 140 150 200 1.0 30 .004(0.10)MAX. 40 120 -55 to +150 .014(0.35) - 65 to +175.006(0.15) SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH *Marking: E32 VF Maximum Average Reverse Current at @T A=25℃ Rated DC Blocking Voltage 16 60 TSTG CHARACTERISTICS 15 50 K¡ Maximum Forward Voltage at 1.0A DC 14 40 .035(0.90) .028(0.70) Electrical Characteristics @ 25к RATINGS .069(1.75) .057(1.45) .004(0.10)MIN. Symbol Parameter Min Typ Max Unit Method 2026 .035(0.90) VCC Supply voltage ---50 --V Dimensions in inches and (millimeters) • Polarity : Indicated by cathode band V VIN Input voltage -12 --5 -100 IO Position : Any • Mounting Output current ----mA IC(MAX) -100 • Weight : Approximated 0.011 gram Pd Power dissipation --150 --mW Tj Junction temperature --150 --ć CHARACTERISTICS Tstg StorageMAXIMUM temperature RATINGS AND ELECTRICAL -55 --150 ć Ratings at 25℃ ambient temperature unless otherwise specified. @T A=125℃ IR 0.50 0.9 0.70 0.85 Dimensions in inches and (millimeters) 0.5 0.92 10 NOTES: 1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC. 2- Thermal Resistance From Junction to Ambient 2012-06 2012-0 WILLAS ELECTRONIC COR WILLAS ELECTRONIC CORP. WILLAS FM120-M DTA123JE THRU PNP Digital Transistor FM1200-M 1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS -20V- 200V Pb Free Produ SOD-123+ PACKAGE Package outline Features • Batch process design, excellent power dissipation offers better reverse leakage current and thermal resistance. SOD-123H • Low profile surface mounted application in order to optimize board space. • Low power loss, high efficiency. • High current capability, low forward voltage drop. • High surge capability. • Guardring for overvoltage protection. • Ultra high-speed switching. • Silicon epitaxial planar chip, metal silicon junction. • Lead-free parts meet environmental standards of 0.146(3.7) 0.130(3.3) 0.012(0.3) Typ. 0.071(1.8) 0.056(1.4) MIL-STD-19500 /228 • RoHS product for packing code suffix "G" Halogen free product for packing code suffix "H" Mechanical data 0.040(1.0) 0.024(0.6) • Epoxy : UL94-V0 rated flame retardant • Case : Molded plastic, SOD-123H , • Terminals :Plated terminals, solderable per MIL-STD-750 0.031(0.8) Typ. 0.031(0.8) Typ. Method 2026 • Polarity : Indicated by cathode band • Mounting Position : Any • Weight : Approximated 0.011 gram Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive of inductive load. For capacitive load, derate current by 20% RATINGS SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-M Marking Code Maximum Recurrent Peak Reverse Voltage VRRM 12 20 13 30 14 40 15 50 16 60 18 80 10 100 115 150 120 200 Maximum RMS Voltage VRMS 14 21 28 35 42 56 70 105 140 Maximum DC Blocking Voltage VDC 20 30 40 50 60 80 100 150 200 IO Maximum Average Forward Rectified Current Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) IFSM RΘJA Typical Thermal Resistance (Note 2) Typical Junction Capacitance (Note 1) CJ Operating Temperature Range TJ Storage Temperature Range 1.0 30 40 120 -55 to +125 -55 to +150 - 65 to +175 TSTG CHARACTERISTICS SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-M VF Maximum Forward Voltage at 1.0A DC Maximum Average Reverse Current at @T A=25℃ Rated DC Blocking Voltage @T A=125℃ IR 0.50 0.70 0.85 0.9 0.5 0.92 10 NOTES: 1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC. 2- Thermal Resistance From Junction to Ambient 2012-0 2012-06 WILLAS ELECTRONIC COR WILLAS ELECTRONIC CORP. WILLAS PNP Digital Transistor 1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS -20V- 200V SOD-123+ PACKAGE Features FM120-M+ DTA123JE THRU FM1200-M+ Pb Free Product Package outline • Batch process design, excellent power dissipation offers better reverse leakage current and thermal resistance. SOD-123H • Low profile surface mounted application in order to optimize board space. 0.146(3.7) high efficiency. • Low power loss, Device PN Packing 0.130(3.3) • High current capability, (1) low (2) forward voltage drop. G ‐WS Tape& Reel: 3 Kpcs/Reel surge capability. • High DTA123JE –T for overvoltage protection. • Guardring Note: (1) Packing code, Tape & Reel Packing • Ultra high-speed switching. (2) RoHS product for packing code suffix ”G”；Halogen free product for packing code suffix “H” epitaxial planar chip, metal silicon junction. • Silicon Lead-free parts meet environmental standards of • MIL-STD-19500 /228 • RoHS product for packing code suffix "G" Halogen free product for packing code suffix "H" Ordering Information: 0.012(0.3) Typ. 0.071(1.8) 0.056(1.4) Mechanical data • Epoxy : UL94-V0 rated flame retardant • Case : Molded plastic, SOD-123H , • Terminals :Plated terminals, solderable per MIL-STD-750 0.040(1.0) 0.024(0.6) 0.031(0.8) Typ. 0.031(0.8) Typ. Method 2026 • Polarity : Indicated by cathode band • Mounting Position : Any • Weight : Approximated 0.011 gram Dimensions in inches and (millimeters) ***Disclaimer*** MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS WILLAS reserves the right to make changes without notice to any product Ratings at 25℃ ambient temperature unless otherwise specified. specification herein, to make corrections, modifications, enhancements or other Single phase half wave, 60Hz, resistive of inductive load. For capacitive load, derate current by 20% changes. WILLAS or anyone on its behalf assumes no responsibility or liability SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH RATINGS for any errors or inaccuracies. Data sheet specifications and its information 12 13 14 15 16 18 10 115 120 contained are intended to provide a product description only. "Typical" parameters 20 30 40 50 60 80 100 150 200 Maximum Recurrent Peak Reverse Voltage VRRM 14 21 28 35 42 56 70 105 140 Maximum RMS Voltage VRMS which may be included on WILLAS data sheets and/ or specifications can Maximum DC Blocking Voltage 20 30 40 50 60 80 100 150 200 VDC and do vary in different applications and actual performance may vary over time. Maximum Average Forward Rectified Current IO 1.0 WILLAS does not assume any liability arising out of the application or Peak Forward Surge Current 8.3 ms single half sine-wave 30 IFSM use of any product or circuit. superimposed on rated load (JEDEC method) 40 Typical Thermal Resistance (Note 2) RΘJA 120 Typical Junction Capacitance (Note 1) CJ WILLAS products are not designed, intended or authorized for use in medical, -55 to +125 -55 to +150 Operating Temperature Range TJ Marking Code - 65 to +175 Storagelife‐saving implant or other applications intended for life‐sustaining or other related Temperature Range TSTG applications where a failure or malfunction of component or circuitry may directly CHARACTERISTICS SYMBOL FM120-MH FM130-MH FM140-MH FM150-MH FM160-MH FM180-MH FM1100-MH FM1150-MH FM1200-MH 0.9 0.92 VF 0.50 0.70 0.85 or indirectly cause injury or threaten a life without expressed written approval 0.5 Maximum Average Reverse Current at @T A=25℃ IR of WILLAS. Customers using or selling WILLAS components for use in 10 @T A=125℃ Rated DC Blocking Voltage such applications do so at their own risk and shall agree to fully indemnify WILLAS NOTES: 1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC. Inc and its subsidiaries harmless against all claims, damages and expenditures . Maximum Forward Voltage at 1.0A DC 2- Thermal Resistance From Junction to Ambient 2012-06 2012-0 WILLAS ELECTRONIC CORP WILLAS ELECTRONIC CORP.