RS201-01 THRU 2.0A GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIERS RS207-01 RS-1 PACKAGE FEATURES RS-1 * Ideal for printed circuit board * Surge overload rating: 60 amperes peak * Mounting position: Any * Glass Passivated chip Junctions * RoHS product for packing code suffix "G" .472(12.00) .416(10.57) .512(13.00) .460(11.68) AC Halogen free product for packing code suffix "H" MECHANICAL DATA * UL listed the recognized component directory, file #E195711 * Epoxy: Device has UL flammability classification 94V-O * Weight: 1 . 6 3 5 grams Approximated .390 MIN. (9.90) .035(0.90) DIA. .028(0.70) TYP. .160(4.10) SPACING .140(3.60) .600(15.24) .560(14.22) .157(4.00) .141(3.60) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. .053(1.35) .045(1.15) Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) MAXIMUM RATINGS (At T A = 25 oC unless otherwise noted) RATINGS SYMBOL RS201 RS202 RS203 RS204 RS205 RS206 RS207 Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Bridge Input Voltage VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 Maximum DC Blocking Voltage Maximum Average Forward Output Current T A = 50oC Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Thermal Resistance (Note 1) Operating Temperature Range Storage Temperature Range Typical Junction Capacitance (Note 2) UNITS Volts IO 2.0 Amps I FSM 60 Amps R q JC 15 R q JA 30 TJ -55 to + 150 0 C TSTG -55 to + 150 0 C CJ 15 0 C/ W pF ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted) CHARACTERISTICS SYMBOL Maximum Forward Voltage Drop per Bridgeat Element at 2.0A DC VF o Maximum Reverse Current at Rated @T A = 25 C Dc Blocking Voltage per element @T A = 100 oC IR RS201 RS202 RS203 RS204 1.1 RS205 RS206 RS207 UNITS Volts 10 uAmps 0.5 mAmps NOTES : 1. Thermal Resistance : Heat-sink case mounted or if PCB mounted. 2. Measured at 1 MHZ and applied reverse voltage of 4.0 volts 2013.04 WILLAS ELECTRONIC CORP. RS201-01 THRU 2.0A GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIERS RS207-01 RS-1 PACKAGE RATING AND CHARACTERISTIC CURVES FIG. 2 - TYPICAL FORWARD CURRENT DERATING CURVE FIG. 1 - MAXIMUM NON-REPETITIVE FORWARD 2.0 60 AVERAGE FORWARD CURRENT, (A) PEAK FORWARD SURGE CURRENT, (A) SURGE CURRENT 50 8.3ms Single Half Sine-Wave (JEDED Method) 40 30 20 10 0 0 2 4 6 10 20 40 60 NUMBER OF CYCLES AT 60Hz 1.5 1.0 0 100 Single Phase Half Wave 60Hz Inductive or Resistive Load .5 0 25 50 75 100 125 150 AMBIENT TEMPERATURE, ( ) FIG. 4 - TYPICAL REVERSE CHARACTERISTICS 10 1.0 0.1 TJ = 25 Pulse Width = 300us 1% Duty Cycle .01 .4 2013.04 .5 .6 .7 .8 .9 1.0 1.1 1.2 INSTANTANEOUS FORWARD VOLTAGE, (V) INSTANTANEOUS REVERSE CURRENT, (uA) INSTANTANEOUS FORWARD CURRENT, (A) FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 10 6 4 2 1.0 .6 TJ = 25 .2 .1 .06 .02 .01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) WILLAS ELECTRONIC CORP. RS201-01 2.0A GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIERS RS-1 PACKAGE THRU RS207-01 Ordering Information: Device PN Part Number G(1)-WS Packing Bulk Pack :900pcs/box; 14,400pcs/Carton Note: 1. RoHS product for packing code suffix ”G”, Halogen free product for packing code suffix "H" . ***Disclaimer*** WILLAS reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. WILLAS or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on WILLAS data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. WILLAS does not assume any liability arising out of the application or use of any product or circuit. WILLAS products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of WILLAS. Customers using or selling WILLAS components for use in such applications do so at their own risk and shall agree to fully indemnify WILLAS Inc and its subsidiaries harmless against all claims, damages and expenditures. 2013.04 WILLAS ELECTRONIC CORP.