AS1PD, AS1PG, AS1PJ, AS1PK, AS1PM Datasheet

AS1PD, AS1PG, AS1PJ, AS1PK, AS1PM
www.vishay.com
Vishay General Semiconductor
Standard Avalanche Surface Mount Rectifiers
FEATURES
• Glass passivated pellet chip junction
®
eSMP Series
Available
• Very low profile - typical height of 1.0 mm
• Ideal for automated placement
• Controlled avalanche characteristics
• Low forward voltage drop
• Low leakage current
• Meets MSL level 1, per J-STD-020; LF maximum peak
of 260 °C
DO-220AA (SMP)
• AEC-Q101 qualified
PRIMARY CHARACTERISTICS
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
IF(AV)
1.5 A
VRRM
200 V, 400 V, 600 V, 800 V,
1000 V
IFSM
30 A
IR
0.3 μA
VF at IF = 1.5 A
0.89 V
EAS
20 mJ
TJ max.
175 °C
Package
DO-220AA (SMP)
Diode variations
Single die
MECHANICAL DATA
Case: DO-220AA (SMP)
Molding compound meets UL 94 V-0 flammability rating
Base P/N-M3 - halogen-free, RoHS-compliant, and
commercial grade
Base P/NHM3 - halogen-free, RoHS-compliant, and
automotive grade
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
M3 suffix meets JESD 201 class 1A whisker test, HM3 suffix
meets JESD 201 class 2 whisker test
TYPICAL APPLICATIONS
For use in general purpose rectification of power supplies,
inverters, converters, and freewheeling diodes for
consumer, automotive, and telecommunication.
Polarity: Color band denotes cathode end
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Device marking code
AS1PD
AS1PG
AS1PJ
AS1PK
AS1PM
ASD
ASG
ASJ
ASK
ASM
200
400
600
800
1000
UNIT
Max. repetitive peak reverse voltage
VRRM
Max. DC forward current (see fig. 1)
IF (1)
1.5
A
Peak forward surge current 10 ms single half
sine-wave superimposed on rated load
IFSM
30
A
Non-repetitive avalanche energy
at IAS = 1.0 A, TA = 25 °C
EAS
20
mJ
TJ, TSTG
-55 to +175
°C
Operating junction and storage temperature range
V
Note
(1) Mounted on 5 mm x 5 mm pad areas PCB
Revision: 19-Feb-16
Document Number: 89290
1
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
AS1PD, AS1PG, AS1PJ, AS1PK, AS1PM
www.vishay.com
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS
SYMBOL
TA = 25 °C
IF = 1.0 A
TA = 125 °C
Instantaneous forward voltage
MAX.
0.95
-
0.84
-
0.99
1.15
TA = 125 °C
0.89
1.0
TA = 25 °C
0.3
5
35
100
VF (1)
TA = 25 °C
IF = 1.5 A
TYP.
IR (2)
UNIT
V
Reverse current
Rated VR
Typical reverse recovery time
IF = 0.5 A, IR = 1.0 A,
Irr = 0.25 A
trr
1.5
-
μs
Typical junction capacitance
4.0 V, 1 MHz
CJ
10.4
-
pF
TA = 125 °C
μA
Notes
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
(2) Pulse test: Pulse width  40 ms
THERMAL CHARACTERISTICS (TA = 25 °c unless otherwise noted)
PARAMETER
SYMBOL
RJA
Typical thermal resistance
AS1PD
AS1PG
AS1PJ
(1)
AS1PK
AS1PM
115
RJM (1)
UNIT
°C/W
15
Note
(1) Unit mounted on PCB with 5 mm x 5 mm copper pad areas. Thermal resistance R
JA - junction to ambient, RJM - junction to mount at the
terminal of cathode band
ORDERING INFORMATION (Example)
PREFERRED P/N
UNIT WEIGHT (g)
PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
0.024
84A
3000
7" diameter plastic tape and reel
0.024
85A
10 000
13" diameter plastic tape and reel
AS1PJ-M3/84A
AS1PJ-M3/85A
(1)
0.024
84A
3000
7" diameter plastic tape and reel
AS1PJHM3/85A (1)
0.024
85A
10 000
13" diameter plastic tape and reel
AS1PJHM3/84A
Note
(1) AEC-Q101 qualified
1.6
1.8
1.4
1.6
D = 0.5 D = 0.8
Average Power Loss (W)
Average Forward Rectified Current (A)
RATINGS AND CHARACTERISTICS CURVES (TA = 25 C unless otherwise noted)
1.2
1.0
0.8
0.6
Resistive or Inductive Load
0.4
TM Measured
at the Cathode Band Terminal
0.2
D = 0.3
1.4
D = 0.2
1.2
D = 1.0
D = 0.1
1.0
0.8
T
0.6
0.4
D = tp/T
0.2
0
tp
0
95
105
115
125
135
145
155
165
175
0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
TM - Mount Temperature (°C)
Average Forward Current (A)
Fig. 1 - Max. Forward Current Derating Curve
Fig. 2 - Forward Power Loss Characteristics
Revision: 19-Feb-16
Document Number: 89290
2
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
AS1PD, AS1PG, AS1PJ, AS1PK, AS1PM
www.vishay.com
Vishay General Semiconductor
100
TA = 175 °C
Junction Capacitance (pF)
Instantaneous Forward Current (A)
10
TA = 125 °C
1
TA = 75 °C
TA = 25 °C
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1
10
100
Instantaneous Forward Voltage (V)
Reverse Voltage (V)
Fig. 3 - Typical Instantaneous Forward Characteristics
Fig. 5 - Typical Junction Capacitance
1000
Transient Thermal Impedance (°C/W)
1000
Instantaneous Reverse Current (μA)
10
1
0.1
0.1
0.5
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
TA = 175 °C
100
TA = 125 °C
10
TA = 75 °C
1
TA = 25 °C
0.1
20
30
40
50
60
70
80
90
10
1
0.01
0.01
10
100
100
0.1
1
10
100
Percent of Rated Peak Reverse Voltage (%)
t - Pulse Duration (s)
Fig. 4 - Typical Reverse Characteristics
Fig. 6 - Typical Transient Thermal Impedance
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
DO-220AA (SMP)
0.012 (0.30) REF.
Cathode Band
0.053 (1.35)
0.041 (1.05)
0.086 (2.18)
0.074 (1.88)
0.142 (3.61)
0.126 (3.19)
0.036 (0.91)
0.024 (0.61)
0.103 (2.60)
0.087 (2.20)
0.032 (0.80)
0.016 (0.40)
0.158 (4.00)
0.146 (3.70)
0.105
(2.67)
0.013 (0.35)
0.004 (0.10)
0.025 0.030
(0.635) (0.762)
0.045 (1.15)
0.033 (0.85)
0.012 (0.30) 0.018 (0.45)
0.000 (0.00) 0.006 (0.15)
0.100
(2.54)
0.050
(1.27)
Revision: 19-Feb-16
Document Number: 89290
3
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000