ϴϬϱϬ,^>dϭ EWEWůĂƐƚŝĐͲŶĐĂƉƐƵůĂƚĞdƌĂŶƐŝƐƚŽƌƐ PRIMARY CHARACTERISTICS PC SOT-23 PACKAGE 300mW VCEO 25V IC 1.5A hFE@VCE=1V ,IC=100mA Marking Code : Y1 150℃ TJ Max FEATURES MECHANICAL DATA Complimentary to SS8550 CASE：TRANSFER MOLDED Moisture Sensitivity Level 1 POLARITY：AS MARKED TERMINALS：PURETIN PLATED MAXIMUM RATINGS (Ta=25℃ unless otherwise noted) Value Unit VCBO Symbol Collector-Base Voltage Parameter 40 V VCEO Collector-Emitter Voltage 25 V VEBO Emitter-Base Voltage 5 V IC Collector Current -Continuous 1.5 A PC Collector Power Dissipation 0.3 W Tj Junction Temperature 150 ℃ Tstg Storage Temperature -55-150 ℃ ELECTRICAL CHARACTERISTICS (Ta=25℃ unless otherwise specified) Parameter Symbol Test conditions Min Typ Max Unit Collector-base breakdown voltage V(BR)CBO IC= 100μA, IE=0 40 V Collector-emitter breakdown voltage V(BR)CEO IC= 0.1mA, IB=0 25 V Emitter-base breakdown voltage V(BR)EBO IE=100μA, IC=0 5 V Collector cut-off current ICBO VCB=40V, IE=0 0.1 μA Collector cut-off current ICEO VCE=20V, IE=0 0.1 μA Emitter cut-off current IEBO VEB= 5V, IC=0 0.1 μA hFE(1) VCE=1V, IC= 100mA 0 0 hFE(2) VCE=1V, IC= 800mA DC current gain 40 Collector-emitter saturation voltage VCE(sat) IC=800mA, IB= 80mA 0.5 V Base-emitter saturation voltage VBE(sat) IC=800mA, IB= 80mA 1.2 V Transition frequency 201ϱ.Ϭϵ fT VCE=10V, IC= 50mA f=30MHz www.willas.com.tw 100 MHz Rev. J0ϯ P1 ϴϬϱϬ,^>dϭ EWEWůĂƐƚŝĐͲŶĐĂƉƐƵůĂƚĞdƌĂŶƐŝƐƚŽƌƐ Typical Characteristics Static Characteristic 140 hFE 350uA 80 300uA 250uA 60 200uA 40 IC Ta=100℃ 400uA DC CURRENT GAIN (mA) IC COLLECTOR CURRENT 450uA 100 —— COMMON EMITTER VCE=1V COMMON EMITTER Ta=25℃ 500uA 120 hFE 1000 150uA 300 Ta=25℃ 100 30 100uA 20 IB=50uA 0 0.0 10 0.5 1.0 1.5 2.0 COLLECTOR-EMITTER VOLTAGE VCEsat 2.5 1 Ta=100℃ Ta=25℃ 30 VBEsat 1.2 300 100 100 30 COLLECTOR CURRENT IC —— 10 3 (V) BASE-EMITTER SATURATION VOLTAGE VBEsat (V) COLLECTOR-EMITTER SATURATION VOLTAGE VCEsat (mV) 1000 VCE 10 1000 1500 300 IC (mA) IC —— 1.0 Ta=25℃ 0.8 Ta=100℃ 0.6 0.4 3 β=10 β=10 1 0.2 1 10 3 100 30 COLLECTOR CURRENT VBE 1000 1500 300 IC 1 30 10 3 (mA) 100 COLLECTOR CURRENT —— IC Cob/ Cib 200 1500 1000 (mA) IC —— VCB/ VEB f=1MHz IE=0/IC=0 100 (pF) (mA) C 30 Ta=25℃ 10 Cob 10 COMMON EMITTER VCE=1V 0.4 0.6 fT 0.8 —— 1.0 VBE 1 0.1 1.2 REVERSE VOLTAGE IC PC 350 300 100 30 10 3 3 1 0.3 (V) COLLECTOR POWER DISSIPATION PC (mW) 1000 (MHz) 30 3 3 BASE-EMMITER VOLTAGE fT CAPACITANCE IC COLLCETOR CURRENT Ta=100℃ 100 1 0.2 TRANSITION FREQUENCY Ta=25℃ Cib 300 1000 1500 300 VCE=10V —— V 10 20 (V) Ta 300 250 200 150 100 50 Ta=25℃ 1 0 1 3 30 10 COLLECTOR CURRENT IC 100 0 (mA) 25 50 75 AMBIENT TEMPERATURE 100 Ta 125 150 (℃ ) www.cj-elec.com 201ϱ.Ϭϵ www.willas.com.tw Rev. J0ϯ A,Jun,2014 P2 ϴϬϱϬ,^>dϭ EWEWůĂƐƚŝĐͲŶĐĂƉƐƵůĂƚĞdƌĂŶƐŝƐƚŽƌƐ Outline Drawing .102(2.64) .063(1.60) .047(1.20) .122(3.10) .106(2.70) .083(2.10) .006(0.15)MIN. SOT-23 .008(0.20) .003(0.08) .95 TYP .080(2.04) .070(1.78) .020(0.50) .012(0.30) .049(1.25) .035(0.89) .004(0.10)MAX. Dimensions in inches and (millimeters) 201ϱ.Ϭϵ www.willas.com.tw Rev.E Rev. J0ϯ P3 ϴϬϱϬ,^>dϭ EWEWůĂƐƚŝĐͲŶĐĂƉƐƵůĂƚĞdƌĂŶƐŝƐƚŽƌƐ SOT-23 Suggested Soldering Pad Layout 0.0355 (0.90) 0.0435 0.0315 (0.80) (1.10) 0.0435 (1.10) Dimensions in inches and (millimeters) 201ϱ.Ϭϵ www.willas.com.tw RevA Rev. J0ϯ P4 ϴϬϱϬ,^>dϭ EWEWůĂƐƚŝĐͲŶĐĂƉƐƵůĂƚĞdƌĂŶƐŝƐƚŽƌƐ 201ϱ.Ϭϵ www.willas.com.tw Rev. J0ϯ P5 ϴϬϱϬ,^>dϭ EWEWůĂƐƚŝĐͲŶĐĂƉƐƵůĂƚĞdƌĂŶƐŝƐƚŽƌƐ Ordering Information: Device PN 8050HSLT1 G(1) ‐WS Packing Tape&Reel: 3 Kpcs/Reel Note: (1) RoHS product for packing code suffix ”G”；Halogen free product for packing code suffix “H” ***Disclaimer*** WILLAS reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. WILLAS or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on WILLAS data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. WILLAS does not assume any liability arising out of the application or use of any product or circuit. This is the preliminary specification. WILLAS products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of WILLAS. Customers using or selling WILLAS components for use in such applications do so at their own risk and shall agree to fully indemnify WILLAS Inc and its subsidiaries harmless against all claims, damages and expenditures. 201ϱ.Ϭϵ www.willas.com.tw Rev. J0ϯ P6