Ϯ^ϮϬϮϵ ;WEWͿ'ĞŶĞƌĂůWƵƌƉŽƐĞWůĂƐƚŝĐͲŶĐĂƉƐƵůĂƚĞdƌĂŶƐŝƐƚŽƌ PRIMARY CHARACTERISTICS SOT-723 PC 150mW VCEO -50V IC -150mA VCE(sat) -0.5V hFE 120~560 TJ,Max 150℃ PACKAGE Marking Code 5XOH: 3OHDVH6HH7KH CLASSIFICATION OF hFE 1. BASE 2. EMITTER 3. COLLECTOR FEATURES MECHANICAL DATA Excellent hFE linearity Case：Molded plastic,SOT-723 Moisture Sensitivity Level 1 Polarity：As Above Marked Terminals :Plated terminals, solderable per MIL-STD-750,Method 2026 Epoxy : UL94-V0 rated flame retardant Absolute maximum ratings (Ta=25℃) Symbol Parameter Limit Unit VCBO Collector-Base Voltage -60 V VCEO Collector-Emitter Voltage -50 V VEBO Emitter-Base Voltage -6 V IC Collector Current -Continuous -150 mA PC Collector Dissipation 150 mW Tj Junction temperature 150 ℃ Tstg Storage Temperature -55~+150 ℃ Electrical characteristics (Ta=25℃ unless otherwise specified) Parameter Symbol Test conditions Min Typ Max Unit Collector-base breakdown voltage V(BR)CBO IC=-50μA,IE=0 -60 V Collector-emitter breakdown voltage V(BR)CEO IC=-1mA,IB=0 -50 V Emitter-base breakdown voltage -6 V(BR)EBO IE=-50μA,IC=0 Collector cut-off current ICBO VCB=-60V,IE=0 Emitter cut-off current IEBO VEB=-6V,IC=0 DC current transfer ratio hFE VCE=-6V,IC=-1mA Collector-emitter saturation voltage Transition frequency Output capacitance VCE(sat) fT Cob V 120 -0.1 μA -0.1 μA 560 IC=-50mA,IB=-5mA -0.5 VCE=-12V,IC=2mA, f=30MHz VCB=-12V,IE=0, f=1MHz 140 V MHz 5 pF Classification of hFE 2015.01 Rank Q R S Range 120~270 180~390 270~560 MAKING FQ FR FS www.willas.com.tw Rev. J01 P1 Ϯ^ϮϬϮϵ ;WEWͿ'ĞŶĞƌĂůWƵƌƉŽƐĞWůĂƐƚŝĐͲŶĐĂƉƐƵůĂƚĞdƌĂŶƐŝƐƚŽƌ Typical Characteristics Static Characteristic -8 (mA) IC hFE -21uA -18uA -4 —— Ta=100℃ -24uA DC CURRENT GAIN IC COLLECTOR CURRENT COMMON EMITTER Ta=25℃ -27uA -6 hFE 1000 -30uA -15uA -12uA -9uA Ta=25℃ 100 -2 -6uA COMMON EMITTER VCE=-6V IB=-3uA -0 -0 -2 -4 -6 -8 COLLECTOR-EMITTER VOLTAGE VBEsat —— VCE 10 -0.1 -10 IC COLLECTOR-EMITTER SATURATION VOLTAGE VCEsat (mV) BASE-EMITTER SATURATION VOLTAGE VBE(sat) (mV) -10 VCEsat -1000 -3000 -1000 -1 COLLECTOR CURRENT (V) Ta=25℃ Ta=100℃ IC -100 -150 (mA) IC —— -100 Ta=100℃ Ta=25℃ β=10 β=10 -100 -0.1 -1 COLLECTOR CURRENT IC -10 -0.1 -100 -150 -10 IC (mA) fT VBE —— -100 -150 -10 COLLECTOR CURRENT IC (mA) IC —— 1000 fT IC (mA) (MHz) -150 -100 TRANSITION FREQUENCY 100 -10 T =2 5℃ a T =1 00℃ a COLLECTOR CURRENT -1 -1 COMMON EMITTER VCE=-6V -0.1 -0.0 -0.2 -0.4 -0.6 -0.8 -1.0 10 VCE= -12V Ta=25℃ 1 -0.5 -1.2 -1 -10 COLLECTOR CURRENT BASE-EMMITER VOLTAGE VBE (V) Cob/ Cib —— VCB/ VEB 100 PC 200 —— -100 IC (mA) Ta COLLECTOR POWER DISSIPATION PC (mW) f=1MHz IE=0/IC=0 Cib 10 CAPACITANCE C (pF) Ta=25℃ Cob 1 0.1 -0.1 100 50 0 -1 REVERSE VOLTAGE 2015.01 150 -10 V -20 0 25 50 75 AMBIENT TEMPERATURE (V) www.willas.com.tw 100 Ta 125 150 (℃ ) Rev. J01 P2 Ϯ^ϮϬϮϵ ;WEWͿ'ĞŶĞƌĂůWƵƌƉŽƐĞWůĂƐƚŝĐͲŶĐĂƉƐƵůĂƚĞdƌĂŶƐŝƐƚŽƌ .034(0.85) .030(0.45) .006(0.15) Dimensions in inches and (millimeters) 2015.01 .049(1.25) .045(1.15) .007(0.17) .003(0.07) .031(0.80)Typ. .011(0.27) SOT-723 .006(0.15)MIN. .049(1.25) .045(1.15) .030(0.75) .034(0.85) Outline Drawing www.willas.com.tw Rev.D Rev. J01 P3 Ϯ^ϮϬϮϵ ;WEWͿ'ĞŶĞƌĂůWƵƌƉŽƐĞWůĂƐƚŝĐͲŶĐĂƉƐƵůĂƚĞdƌĂŶƐŝƐƚŽƌ 6277DSHDQG5HHO 2015.01 www.willas.com.tw Rev. J01 P4 Ϯ^ϮϬϮϵ ;WEWͿ'ĞŶĞƌĂůWƵƌƉŽƐĞWůĂƐƚŝĐͲŶĐĂƉƐƵůĂƚĞdƌĂŶƐŝƐƚŽƌ Ordering Information: Device PN P2SA2029 ‐T(1) G(2)‐WS Packing Tape&Reel: ϴ Kpcs/Reel Note: (1) Packing code, Tape & Reel Packing (2) RoHS product for packing code suffix ”G”；Halogen free product for packing code suffix “H” ***Disclaimer*** WILLAS reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. WILLAS or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on WILLAS data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. WILLAS does not assume any liability arising out of the application or use of any product or circuit. This is the preliminary specification. WILLAS products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of WILLAS. Customers using or selling WILLAS components for use in such applications do so at their own risk and shall agree to fully indemnify WILLAS Inc and its subsidiaries harmless against all claims, damages and expenditures. 2015.01 www.willas.com.tw Rev. J01 P5