V60170PW-M3 www.vishay.com Vishay General Semiconductor Dual High-Voltage Trench MOS Barrier Schottky Rectifier Ultra Low VF = 0.52 V at IF = 10 A FEATURES • Trench MOS Schottky technology TMBS® • Low forward voltage drop, low power losses • High efficiency operation • Solder dip 275 °C max. 10 s, per JESD 22-B106 • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 TYPICAL APPLICATIONS TO-3PW PIN 1 PIN 2 PIN 3 CASE For use in high frequency DC/DC converters, switching power supplies, freewheeling diodes, OR-ing diode, and reverse battery protection. MECHANICAL DATA PRIMARY CHARACTERISTICS IF(AV) 2 x 30 A VRRM 170 V IFSM 260 A VF at IF = 30 A 0.65 V TJ max. 175 °C Package TO-3PW Diode variation Dual common cathode Case: TO-3PW Molding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free, RoHS-compliant, and commercial grade Terminals: Matte tin plated leads, solderable J-STD-002 and JESD 22-B102 M3 suffix meets JESD 201 class 1A whisker test per Polarity: As marked Mounting Torque: 10 in-lbs maximum MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Maximum repetitive peak reverse voltage Maximum average forward rectified current (fig. 1) SYMBOL V60170PW UNIT VRRM 170 V 60 per device per diode Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load Voltage rate of change (rated VR) Operating junction and storage temperature range IF(AV) A 30 IFSM 260 A dV/dt 10 000 V/μs TJ, TSTG -40 to +175 °C Revision: 04-Dec-13 Document Number: 89944 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V60170PW-M3 www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS SYMBOL IF = 10 A IF = 15 A TA = 25 °C IF = 30 A Instantaneous forward voltage per diode VF (1) IF = 10 A TA = 125 °C IF = 15 A Reverse current per diode - 0.72 - 0.80 0.93 0.52 - UNIT V - 0.65 0.73 TA = 25 °C 2.6 - μA TA = 125 °C 3.2 - mA - 500 μA 6.2 60 mA IR (2) TA = 25 °C VR = 170 V MAX. 0.66 0.56 IF = 30 A VR = 136 V TYP. TA = 125 °C Notes (1) Pulse test: 300 μs pulse width, 1 % duty cycle (2) Pulse test: Pulse width 20 ms THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL V60170PW UNIT 0.9 per diode Typical thermal resistance °C/W RJC per device 0.6 ORDERING INFORMATION (Example) PACKAGE PREFERRED P/N UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE TO-3PW V60170PW-M3/4W 4.5 4W 30/tube Tube 32 30.0 28 Average Power Loss (W) Average Forward Rectified Current (A) RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 24 20 16 12 8 4 0 D = 0.5 D = 0.3 25.0 D = 0.8 D = 0.2 20.0 D = 1.0 D = 0.1 15.0 10.0 T 5.0 D = tp/T tp 25 30 0.0 0 25 50 75 100 125 150 175 Case Temperature (°C) Fig. 1 - Maximum Forward Current Derating Curve 0 5 10 15 20 35 Average Forward Current (A) Fig. 2 - Forward Power Loss Characteristics Per Diode Revision: 04-Dec-13 Document Number: 89944 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V60170PW-M3 www.vishay.com Vishay General Semiconductor 10 000 TA = 175 °C Junction Capacitance (pF) Instantaneous Forward Current (A) 100 TA = 150 °C 10 TA = 125 °C TA = 100 °C 1 TA = 25 °C TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 1000 100 0.1 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.1 0.9 1 Fig. 5 - Typical Junction Capacitance Per Diode 1000 Transient Thermal Impedance (°C/W) Instantaneous Reverse Current (mA) Fig. 3 - Typical Instantaneous Forward Characteristics Per Diode TA = 175 °C TA = 150 °C 10 TA = 125 °C 1 TA = 100 °C 0.1 0.01 TA = 25 °C 0.001 0.0001 20 40 60 80 100 Reverse Voltage (V) Instantaneous Forward Voltage (V) 100 10 100 10 Junction to Case 1 0.1 0.01 Percent of Rated Peak Reverse Voltage (%) 0.1 1 10 100 t - Pulse Duration (s) Fig. 4 - Typical Reverse Characteristics Per Diode Fig. 6 - Typical Transient Thermal Impedance Per Device PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-3PW 0.645 (16.38) 0.625 (15.87) 0.323 (8.20) 0.313 (7.95) 30° Ref. 0.245 (6.23) 0.225 (5.72) 0.170 (4.32) 0.840 (21.34) 0.820 (20.83) 0.160 (4.06) 0.140 (3.56) 0.225 (5.72) 0.205 (5.21) 0.131 (3.33) 0.121 (3.07) 0.048 (1.22) 0.044 (1.12) 0.551 (14.00) 0.537 (13.64) 0.050 (1.27) 3° Ref. R0.155 (R3.94) R0.145 (R3.68) 0.077 (1.96) 0.063 (1.60) 10° Typ. Both Sides 0.079 (2.01) 0.065 (1.65) Ø 0.146 (3.71) Ø 0.136 (3.45) 0.090 (2.29) 0.080 (2.03) 0.565 (14.35) 0.545 (13.84) 0.175 (4.45) 0.165 (4.19) 3° Ref. 3° Ref. 0.467 (11.86) 0.453 (11.51) 5° Ref. Both Sides 0.098 (2.50) 0.083 (2.12) 0.030 (0.75) 0.020 (0.50) Revision: 04-Dec-13 Document Number: 89944 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000