EBL0501T Low Profile , 1-Line ESD protection Description Applications: TVS arrays are designed to protect sensitive electronics • Cellular Handsets & Accessories from damage or latch-up due to ESD. • Personal Digital Assistants (PDAs) It is designed to replace multilayer varistors (MLVs) in • Notebooks & Handhelds portable applications such as cell phones, note- book • Portable Instrumentation computers, and other portable electronics. It features • Digital Cameras large cross-sectional area junctions for conducting high • Peripherals transient currents. They offer desirable characteristics for • MP3 Players board level protection including fast response time, low Packing & Order Information operating and clamping voltage, and no device Shipping:3,000/Reel degradation. Features • Transient protection for data lines to IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact) IEC 61000-4-4 (EFT) 40A (tp = 5/50ns) • Cable Discharge Event (CDE) • Ultra-small package (1.0 x 0.6 x 0.4mm) • Protects one data line • Low clamping voltage • Working voltage: 5V • Low leakage current • Solid-state silicon-avalanche technology • RoHS compliant package Mechanical Data • Molded DFN1006 • RoHS/WEEE Compliant Graphic symbol • Nominal Dimensions: 1.0 x 0.6 x 0.4 mm • Lead Finish: NiPdAu • Molding compound flammability rating: UL 94V-0 • Marking: Marking code, cathode band • Packaging : Tape and Reel Packing & Order Information Shipping:3,000/Reel Publication Order Number: [EBL0501T] © Bruckewell Technology Corporation Rev. A -2014 EBL0501T Low Profile , 1-Line ESD protection MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Maximum Ratings (Tc=25°C unless otherwise noted) Symbol Parameter EBL0501T Unit Ppk Peak Pulse Power (tp = 8/20μs) 25 W Ipp Maximum Peak Pulse Current (tp = 8/20μs) 2 A VESD ESD per IEC 61000-4-2 (Air) +/- 20 KV ESD per IEC 61000-4-2 (Contact) +/- 15 TJ Operating Temperature -55 to +125 °C TSTG Storage Temperature -55 to +150 °C Absolute ratings (limiting value) Symbol Parameter Conditions VRWM Reverse Stand-Off Voltage VBR Reverse Breakdown Voltage It=1mA IR Reverse Leakage Current VRWM=5V , T=25°C VF Forward Voltage IF=10mA VC Clamping Voltage IPP=2A , tp=8/20μs Cj Junction Capacitance VR=0V , f=1 MHz Cj Junction Capacitance VR=3.3V , f=1 MHz Publication Order Number: [EBL0501T] Min Typ. Max. Units 5 V 6 V 1 4.5 0.25 uA 1.2 V 12.5 V 10 pF pF © Bruckewell Technology Corporation Rev. A -2014 EBL0501T Low Profile , 1-Line ESD protection ■Typical Device Characteristics FIG.1-NON-REPETITIVE PEAK PULSE POWER VS. TIME FIG.2-POWER DERATING CURVE FIG.3-CLAMPING VOLTAGE VS. PEAK PULSE FIG.4-FORWARD VOLTAGE VS. FORWARD CURRENT CURRENT Publication Order Number: [EBL0501T] © Bruckewell Technology Corporation Rev. A -2014 EBL0501T Low Profile , 1-Line ESD protection Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Bruckewell Technology Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Bruckewell”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Bruckewell makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Bruckewell disclaims (i) Any and all liability arising out of the application or use of any product. (ii) Any and all liability, including without limitation special, consequential or incidental damages. (iii) Any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Bruckewell’s knowledge of typical requirements that are often placed on Bruckewell products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. Product specifications do not expand or otherwise modify Bruckewell’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Publication Order Number: [EBL0501T] © Bruckewell Technology Corporation Rev. A -2014