ESRV05-4 - Bruckewell Technology Ltd.

ESRV05-4
Low Capacitance TVS Array
Description
SOT23-6
The ESRV05-4 has been specifically designed to protect
sensitive compo-nents which are connected to data and
transmission lines from overvoltage caused by
electrostatic dis-charge (ESD), electrical fast transients
(EFT), and lightning.
The unique design of the series devices incorpo-rates
eight surge rated, low capacitance steering diodes and a
TVS diode in a single package. During transient
conditions, the steering diodes direct the transient to
either the positive side of the power supply line or to
ground. The internal TVS diode prevents over-voltage on
the power line, protecting any down-stream components.
Applications:
• USB 2.0 Power and Data Line Protection
• Video Graphics Cards
• Monitors and Flat Panel Displays
• Digital Video Interface (DVI)
• 10/100/1000 Ethernet
• Notebook Computers、SIM Ports
• ATM Interfaces
• IEEE 1394 Firewire Ports
• RoHS compliant package
Packing & Order Information
Shipping:3,000/Reel
Graphic symbol
Publication Order Number: [ESRV05-4]
© Bruckewell Technology Corporation Rev. A -2014
ESRV05-4
Low Capacitance TVS Array
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Maximum Ratings @25°C unless otherwise Specified
Symbol
Parameter
Value
Unit
Ppk
Peak Pulse Power (tp = 8/20μs) See Figure 1
500
W
IPP
Peak Pulse Current (tp = 8/20μs)
43
A
TSTG
Storage Temperature Range
-55 to +150
°C
TJ
Operating Temperature
-55 to +150
°C
VF
Forward Surge Rating (1/20 seconds @ 25°C, IF=10 mA)
1.5
°C
Electrical Characteristics
Part Numbers
ERV05-4
Min.
V
VBR
Typ.
V
Max.
V
IT
VRWM
IR
mA
V
μA
Cj
TYP
PF
6.0
6.7
-
1
5.0
5
3.5
Publication Order Number: [ESRV05-4]
© Bruckewell Technology Corporation Rev. A -2014
ESRV05-4
Low Capacitance TVS Array
■Typical
Device Characteristics
FIG.1-PEAK PULSE POWER VS PULSE
TIME
FIG.2-POWER WAVE FORM
FIG.3-POWER DERATING CURVE
FIG.4-OVERSHOOT & CLAMPING VOLTAGE FOR
ERV05-4
Publication Order Number: [ESRV05-4]
© Bruckewell Technology Corporation Rev. A -2014
ESRV05-4
Low Capacitance TVS Array
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE
WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Bruckewell Technology Inc., its affiliates, agents, and employees, and all persons acting on its or
their behalf (collectively, “Bruckewell”), disclaim any and all liability for any errors, inaccuracies or
incompleteness contained in any datasheet or in any other disclosure relating to any product.
Bruckewell makes no warranty, representation or guarantee regarding the suitability of the products
for any particular purpose or the continuing production of any product. To the maximum extent
permitted by applicable law, Bruckewell disclaims
(i) Any and all liability arising out of the application or use of any product.
(ii) Any and all liability, including without limitation special, consequential or incidental damages.
(iii) Any and all implied warranties, including warranties of fitness for particular purpose,
non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on
Bruckewell’s knowledge of typical requirements that are often placed on Bruckewell products in
generic applications.
Such statements are not binding statements about the suitability of products for a particular
application. It is the customer’s responsibility to validate that a particular product with the properties
described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance
may vary over time.
Product specifications do not expand or otherwise modify Bruckewell’s terms and conditions of
purchase, including but not limited to the warranty expressed therein.
Publication Order Number: [ESRV05-4]
© Bruckewell Technology Corporation Rev. A -2014