AEROFLEX DATA EXCHANGE PROGRAM TRANSMITTAL PRODUCT CHANGE NOTICE 1. TITLE 2. DOCUMENT NUMBER Microcircuit, 21 bit LVDS Serializer SPO-2012-PCN-0001 3. DATE (Year, Month, Date) 2012, February, 22 4. MANUFACTURER NAME AND ADDRESS 5. MANUFACTURER POINT OF CONTACT NAME AEROFLEX COLORADO SPRINGS, INC. Ronald Lake 4350 CENTENNIAL BOULEVARD COLORADO SPRINGS, COLORADO 80907-3486 6. MANUFACTURER POINT OF CONTACT TELEPHONE 719-594-8491 7. MANUFACTURER POINT OF CONTACT EMAIL [email protected] 8. CAGE CODE 9. EFFECTIVE DATE 10. PRODUCT IDENTIFICATION CODE 11. BASE PART 65342 2012, February, 22 WD11C UT54LVDS217 13. SMD NUMBER 14. DEVICE TYPE DESIGNATOR 5962-01534 01, 02 15. RHA LEVELS 16. QML LEVEL R, F, G, H Q, V 17. NON QML LEVEL 18. BLANK 12. BLANK C, P 19. PRODUCT CHANGE The UT54LVDS217 uses Case Outline X (as defined in the SMD) or Case Outline U (as identified in the data sheet) to identify the package outline drawing. The package dimensions are changing as noted below. The new drawing also indicates a “dog-leg” bend at the braze point of the leads to the package while the former package drawing indicated a straight lead brazed to the package. These changes will be applied to case outline “U” in the generic product datasheet and the case outline “X” in the SMD (5962-01534). SIDE VIEW OF PACKAGE CURRENT DIMENSIONS symbol inches CORRECTED DIMENSIONS millimeters min max min max E1 0.430 0.470 10.922 11.938 E2 0.280 -- 7.112 E3 0.050 -- Q 0.026 0.045 20. DISPOSITIONARY RECOMMENDATION: 21. ADEPT REPRESENTATIVE Timothy L. Meade ADEPT FORM F##### REV - symbol inches millimeters min max min max E1 -- 0.415 -- 10.541 -- E2 0.274 0.286 6.960 7.264 1.27 -- E3 0.030 -- 0.762 -- 0.6604 1.143 Q USE AS IS 22. ☐ SIGNATURE CONTACT MANUFACTURER ☐ 0.011 REF REMOVE & REPLACE ☐ 0.279 REF CHECK & USE AS IS 23. DATE ☒ 2012, February, 24 RELEASE DATE: 11/11/11