SPO-2012-PCN-0007

AEROFLEX DATA EXCHANGE PROGRAM TRANSMITTAL
PRODUCT CHANGE NOTICE
1. TITLE
2. DOCUMENT NUMBER
MICROCIRCUIT, MEMORY, DIGITAL,CMOS, 512K X 32BIT (16M) with embedded EDAC, RADIATIONHARDENED, LOW VOLTAGE SRAM, MONOLITHIC
SILICON
SPO-2012-PCN-0007
4. MANUFACTURER NAME AND ADDRESS
5. MANUFACTURER POINT OF CONTACT NAME
3. DATE (Year, Month, Date)
2012, OCTOBER, 04
AEROFLEX COLORADO SPRINGS, INC.
Mike Leslie
4350 CENTENNIAL BOULEVARD
COLORADO SPRINGS, COLORADO 80907-3486
6. MANUFACTURER POINT OF CONTACT TELEPHONE
(719) 594-8148
7. MANUFACTURER POINT OF CONTACT EMAIL
[email protected]
8. CAGE CODE
9. EFFECTIVE DATE
10. PRODUCT IDENTIFICATION CODE
11. BASE PART
65342
2009, Feb, 23
WC04 / WC05
UT8ER512K32M/S
12. BLANK
13. SMD NUMBER
14. DEVICE TYPE DESIGNATOR
5962-06261
TYPE (01-06)
16. RHA LEVELS
17. QML LEVEL
R
Q, V
18. NON QML LEVEL
19. BLANK
HiRel, Protos
19. PRODUCT CHANGE
Aeroflex is working in coordination with DLA Land and Maritime to revise SMD 5962- 06261, revision
level B, for the following changes.
Section 1.5 (sheet 3)
PREVIOUS
with no latch-up ..................................................
Single event upset ................................................
> 111 MeV-cm2/mg 7/ 9/
-16
6.0 x 10 errors/bit-day 8/ 9/
CORRECTED
≤ 111 MeV-cm2/mg 7/ 9/
-16
8.1 x 10 errors/bit-day 8/ 9/
Table IB and note /5 (sheet 11)
PREVIOUS:
Table IB. SEP test limits
All
5/ Soft error rate = 6.0 x 10
5/
-16
1/ 2/
5/
>111
error/bit-day assuming ……………….
CORRECTED:
Table IB. SEP test limits
All
5/ Soft error rate = 8.1 x 10
5/
-16
1/ 2/
5/
≤111
error/bit-day assuming ……………….
NOTE: The revised soft error rate is based on improved calculations using additional heavy ion test data
gathered by Aeroflex. No changes to the device or test methods were made. The inequality symbol changes
( > to ≤ ) are required to achieve technical accuracy with the affected parameter’s description.
20. DISPOSITIONARY RECOMMENDATION:
21. ADEPT REPRESENTATIVE
Timothy L. Meade
ADEPT FORM F##### REV -
USE AS IS
22.
☐
SIGNATURE
CONTACT
MANUFACTURER
☐
REMOVE &
REPLACE
☐
CHECK &
☒
USE AS IS
23. DATE
2012, October, 04
RELEASE DATE: 11/11/11