SD10PU200 High Current Density Surface Mount Schottky Rectifier Description This Schottky rectifier is designed for switch mode power supply and high frequency DC to DC converters. Packaged in DFN 3.3mmx3.3mm, this device is intended for use in low voltage, high frequency, inverters, free-wheeling, by-pass diode and polarity protection applications. Its low profile was especially designed to be used in applications with space-saving constraints. Features • Very low conduction losses • Negligible switching losses • Extremely fast switching • Low thermal resistance • Avalanche capacity specified • High junction temperature • RoHS compliant package Mechanical Data • Case:DFN 3.3*3.3 Graphic symbol •Molding compound meets UL 94 V-0 flammability Packing & Order Information 3,000/Reel Device summary Publication Order Number: [SD10PU200] Symbol Value IF(AV) 10A VRRM 200V Tj(max) 150℃ VF(typ) 0.78 © Bruckewell Technology Corporation Rev. A -2014 SD10PU200 High Current Density Surface Mount Schottky Rectifier MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Maximum Ratings (Tc=25°C unless otherwise noted) Parameter Symbol SD10PU200 Unit Maximum repetitive peak reverse voltage VRRM 200 V Working peak reverse voltage VRWM 140 V Maximum DC blocking voltage VDC 200 V IF(AV) 10 A IFSM 160 A EAS 30 m’J TJ -55 to +150 °C TSTG -55 to +150 °C Maximum average forward rectified current Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Non-repetitive avalanche energy at 25 °C IAS = 2 A per diode Operating junction temperature range Storage temperature range Note: (1) Mounted on 30 mm x 30 mm Al P.C.B. with 50 mm x 25 mm x 100 mm fin heat sink (2) Free air, mounted on recommended copper pad area Electrical characteristics (Tc=25°C unless otherwise noted) Parameter Symbol Instantaneous forward voltage at IF=5A, Tj=25°C at IF=10A, Tj=25°C at IF=5A, Tj=125°C VF at IF=10A, Tj=125°C Maximum reverse current per leg Value Typical Max 0.81 0.87 0.90 1.05 0.67 0.72 0.78 0.88 Tj=25°C Unit V 10 u’A 2 m’A IR at working peak reverse voltage Tj=125°C Thermal characteristics (Tc=25°C unless otherwise noted) Parameter Typical thermal resistance Symbol Value RθJA 90 RθJM 4 Unit °C/W Notes: (1) Mounted on 30 mm x 30 mm Al P.C.B.; thermal resistance RθJM - junction to mount (2) Free air, mounted on recommended copper pad area Publication Order Number: [SD10PU200] © Bruckewell Technology Corporation Rev. A -2014 SD10PU200 High Current Density Surface Mount Schottky Rectifier ■Characteristics Curve FIG.1-FORWARD CURRENT DERATING FIG.2-FORWARD POWER LOSS CURVE CHARACTERISTICS FIG.3-TYPICAL INSTARTANECLS FORWARD FIG.4-TYPICAL REVERSE CHARACTERISTICS CHARACTERISTICS PER LEG FIG.5-TYPICAL JUNCTION CAPACITANCE Publication Order Number: [SD10PU200] FIG.6-TYPICAL TRANSIENT THERMAL IMPEDANCE © Bruckewell Technology Corporation Rev. A -2014 SD10PU200 High Current Density Surface Mount Schottky Rectifier Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Bruckewell Technology Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Bruckewell”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Bruckewell makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Bruckewell disclaims (i) Any and all liability arising out of the application or use of any product. (ii) Any and all liability, including without limitation special, consequential or incidental damages. (iii) Any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Bruckewell’s knowledge of typical requirements that are often placed on Bruckewell products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. Product specifications do not expand or otherwise modify Bruckewell’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Publication Order Number: [SD10PU200] © Bruckewell Technology Corporation Rev. A -2014