SD10PU120

SD10PU120
High Current Density Surface Mount
Schottky Rectifier
Description
This Schottky rectifier is designed for switch mode power
supply and high frequency DC to DC converters.
Packaged in DFN 3.3mmx3.3mm, this device is intended
for use in low voltage, high frequency, inverters,
free-wheeling, by-pass diode and polarity protection
applications. Its low profile was especially designed to be
used in applications with space-saving constraints.
Features
• Very low conduction losses
• Negligible switching losses
• Extremely fast switching
• Low thermal resistance
• Avalanche capacity specified
• High junction temperature
• RoHS compliant package
Packing & Order Information
3,000/Reel
aphic symbol
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Maximum Ratings (Tc=25°C unless otherwise noted)
Parameter
Symbol
SD10PU120
Unit
Maximum repetitive peak reverse voltage
VRRM
120
V
Working peak reverse voltage
VRWM
105
V
Maximum DC blocking voltage
VDC
120
V
IF(AV)
10
A
IFSM
100
A
Maximum average forward rectified current
Total device
Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method)
Publication Order Number: [SD10PU120]
© Bruckewell Technology Corporation Rev. A -2014
SD10PU120
High Current Density Surface Mount
Schottky Rectifier
Maximum Ratings (Tc=25°C unless otherwise noted)
Parameter
Non-repetitive avalanche energy at 25 °C
IAS = 2 A per diode
Operating junction temperature range
Storage temperature range
Symbol
SD10PU120
Unit
EAS
10
m’J
TJ
-55 to +150
°C
TSTG
-55 to +150
°C
Electrical characteristics (Tc=25°C unless otherwise noted)
Parameter
Symbol
Instantaneous forward voltage at IF=5A, Tj=25°C
at IF=10A, Tj=25°C
at IF=5A, Tj=125°C
VF
at IF=10A, Tj=125°C
Maximum reverse current per leg
Value
Typical
Max
0.60
0.66
0.80
0.85
0.55
0.60
0.68
0.72
Tj=25°C
Unit
V
100
u’A
5
m’A
IR
at working peak reverse voltage
Tj=125°C
Note:
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
(2) Pulse test: Pulse width ≤ 40 ms
Thermal characteristics (Tc=25°C unless otherwise noted)
Parameter
Typical thermal resistance
Symbol
Value
Unit
(1)
RθJM
4
RθJA
90
(2)
°C/W
Notes:
(1) Mounted on 30 mm x 30 mm Al P.C.B.; thermal resistance RθJM - junction to mount
(2) Free air, mounted on recommended copper pad area
Publication Order Number: [SD10PU120]
© Bruckewell Technology Corporation Rev. A -2014
SD10PU120
High Current Density Surface Mount
Schottky Rectifier
■CHARACTERISTICS CURVE
Publication Order Number: [SD10PU120]
© Bruckewell Technology Corporation Rev. A -2014
SD10PU120
High Current Density Surface Mount
Schottky Rectifier
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE
WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Bruckewell Technology Inc., its affiliates, agents, and employees, and all persons acting on its or
their behalf (collectively, “Bruckewell”), disclaim any and all liability for any errors, inaccuracies or
incompleteness contained in any datasheet or in any other disclosure relating to any product.
Bruckewell makes no warranty, representation or guarantee regarding the suitability of the products
for any particular purpose or the continuing production of any product. To the maximum extent
permitted by applicable law, Bruckewell disclaims
(i) Any and all liability arising out of the application or use of any product.
(ii) Any and all liability, including without limitation special, consequential or incidental damages.
(iii) Any and all implied warranties, including warranties of fitness for particular purpose,
non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on
Bruckewell’s knowledge of typical requirements that are often placed on Bruckewell products in
generic applications.
Such statements are not binding statements about the suitability of products for a particular
application. It is the customer’s responsibility to validate that a particular product with the properties
described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance
may vary over time.
Product specifications do not expand or otherwise modify Bruckewell’s terms and conditions of
purchase, including but not limited to the warranty expressed therein.
Publication Order Number: [SD10PU120]
© Bruckewell Technology Corporation Rev. A -2014