Multiplying DACs Flexible Building Blocks

Multiplying DACs
Flexible Building Blocks
Analog Devices has a comprehensive family of 8-/10-/12-/14-/16-bit multiplying digital-to-analog converters. As a result of manufacture on a CMOS
submicron process, these DACs offer excellent 4-quadrant multiplication characteristics. By offering flexibility and simplicity, multiplying DAC products
are an ideal building block in a broad range of both fixed and varying input reference applications.
These parts can handle up to ±18 V inputs on the reference, despite operating from a single-supply power supply of up to 2.5 V to 5.5 V. An integrated
feedback resistor (RFB) provides temperature tracking and full-scale voltage output when combined with an external current-to-voltage precision amplifier.
Analog Devices has now revamped its portfolio of high resolution 14-/16-bit current output products to include:
• Improved linearity of ±1 LSB INL
HIGH ACCURACY
16-BIT, ±1LSB INL
• Improved analog THD, multiplying feedthrough, and higher multiplying bandwidth
performance for varying reference voltage multiplication
• Improved digital THD, midscale glitch, and digital feedthrough for fixed reference
voltage multiplication
With the launch of the improved AD55xx products, ADI has added to the already high
performance 8-/10-/12-bit AD54xx family of current output DACs. These updated
current output DAC products enable analog designers to address an even wider range
of both fixed and varying reference multiplying applications.
WIDE INPUT
REFERENCE RANGE
±18V
DIGITAL
INPUT
CODE
LOW OUTPUT GLITCH
IMPULSE 1nV/s
VREF
MULTIPLYING
DACS
FAST SETTLING
TIME 0.1𝛍s
12MHz MBW
8-BIT TO 16-BIT
RESOLUTION
www.analog.com/multiplyingDAC
Multiplying DACs
By offering both flexibility and simplicity, multiplying DACs can be used in a broad range of applications. The benefit of a discrete DAC and op amp solution
is that the op amp selection can be custom tailored to suit the application requirements. Multiplying DACs are ideal building blocks for fixed reference
applications, where the user wants to generate a waveform from a fixed dc voltage. They are also ideally suited for varying reference applications, where
the user wants to digitally condition an ac or arbitrary reference voltage. The AD54xx and revamped AD55xx families of multiplying DACs have been designed
to target both these application spaces.
Multiplying DACs have a number of extra features to assist designers in generating the desired output signal. Some multiplying DACs, such as the
AD5405 and AD5545, include uncommitted matched resistors, whereby a positive output can be obtained simply by connecting an additional op amp
(A2 in Figure 2), which could be the companion op amp within a dual device. Some generics of the family, including the AD5546 and AD5544, have the
added feature of resetting to midscale or zero scale, which is useful in bipolar applications. The required op amp to support these applications can be
selected for particular specifications, for example, high gain bandwidth, high slew rate, low noise, etc.
Key Advantages of AD55xx DACs for Multiplying AC/Arbitrary Reference Applications
• High multiplying bandwidth — signals can be multiplied up to this frequency before they are attenuated by more than 3 dB. The AD5544/AD5554 can
multiply signals up to 12 MHz. See Figure 1.
• Low multiplying feedthrough — this is the error due to capacitive feedthrough from the reference input to the DAC output, when all 0’s are loaded to the
DAC. This measures the amount of possible distortion in the multiplied signal — the AD5544 measures as low as –65 dB at 100 kHz.
• Excellent analog THD — a mathematical representation of the harmonic content in the multiplied waveform signal. It is the rms sum of the harmonics
(V2, V3, V4, and V5) of the DAC output to the fundamental value, V1, given by Equation 1. Measures as low as –103 dB on the AD5543.
THD = 20 log
V2 2 + V3 2 + V4 2 + V5 2
(1)
V1
AC REFERENCE
VDD
VREF
0V
C1
RFB
AD55xx
IOUT1
A1
0V
AGND
SYNC SCLK SDIN
ATTENUATED REFERENCE
AGND
MICROCONTROLLER
C1 = 2
C0
1
×
2𝛑 × RFB GBW
WHERE: CO = OUTPUT IMPEDANCE OF DAC
GBW = GAIN BANDWIDTH PRODUCT OF OP AMP
Figure 1. Multiplying DAC — varying reference — positive reference in/negative out configuration.
Circuit Note CN-0025, Precision, AC Reference Signal
Attenuator Using the AD5546/AD5556 Multiplying DAC.
www.analog.com/CN0025
AN-1094 Application Note, Multiplying DACs — Fixed Reference, Waveform Generation Applications.
www.analog.com/AN-1094
A2
C2
AC REFERENCE
RCOM
VREF
ROFS
R1
VDD
AD55xx
0V
SYNC SCLK SDIN
RFB
C1
IOUT1
ATTENUATED REFERENCE
A1
AGND
0V
AGND
MICROCONTROLLER
Figure 2. Multiplying DAC — varying*UNCOMMITTED
reference — positive
reference
in/positive
out configuration.
RESISTOR
VERSIONS
ONLY
2 | Multiplying DACs
Key Advantages of AD55xx DACs for Multiplying DC Reference Applications
• Fast settling time — the AD55xx benefit from a 0.5 µs settling time from zero scale to full scale within ±0.1%. The AD54xx have zero scale to full scale
settling time of sub 0.1 µs to within ±0.1%.
• High slew rate — due to fast switching architecture of the AD54xx and AD55xx families, an operational amplifier with a slew rate of >100 V/µs is
sufficient to not limit the DAC performance.
• Low glitch — low in R2R structures due to the fact that the current is steered either to ground or virtual ground. The worst case is the midscale glitch,
which can measure as low as –1 nV/s for the AD55xx parts.
• Low noise — the AD54xx and AD55xx family of IOUT DACs utilize low impedance architectures. These are inherently low noise architectures dominated by
the thermal noise of the RDAC resistor.
VDD
+VE VREF
VREF
C1
RFB
AD55xx
0V
IOUT1
GENERATED
WAVEFORM
A1
AGND
0V
SYNC SCLK SDIN
AGND
MICROCONTROLLER
Figure 3. Multiplying DAC — fixed reference — unipolar operation.
AN-1085 Application Note, Multiplying DACs — AC/Arbitrary Reference Applications.
www.analog.com/AN-1085
R3
10k𝛀
R5
10k𝛀
R2
VDD
+VE VREF
0V
R1
VREF
C1
RFB
AD55xx
IOUT1
A1
GENERATED
WAVEFORM
R4
5k𝛀
AGND
A2
0V
SYNC SCLK SDIN
AGND
MICROCONTROLLER
NOTES
1. R1 AND R2 ARE USED ONLY IF GAIN ADJUSTMENT IS REQUIRED.
ADJUST R1 FOR VOUT = 0V WITH CODE 10000000 LOADED TO DAC.
2. MATCHING AND TRACKING ARE ESSENTIAL FOR RESISTOR PAIRS
R3 AND R4.
Figure 4. Multiplying DAC — fixed reference — bipolar operation.
Circuit Note CN-0028, Precision, Bipolar Configuration for the AD5547/AD5557 DAC.
www.analog.com/CN0028
www.analog.com/multiplyingDAC | 3
IOUT Family Tree
AD5543/AD5544/AD5545/
AD5546/AD5547
16-BIT, 1LSB,
SINGLE-/DUAL-/QUAD-CHANNEL
SPI/PARALLEL
>10MHz MULTIPLYING BANDWIDTH
RESOLUTION
AD5553/AD5554/
AD5555/AD5556/AD5557/
AD5453/AD5446
AD5415/
AD5441/AD5443/AD5444/
AD5445/AD5447/AD5449/
AD5452/AD5405
AD5450/AD5451/
AD5424/AD5425/AD5426/
AD5428/AD5429/
AD5433/AD5440
14-BIT, 1LSB,
SINGLE-/DUAL-/QUAD-CHANNEL
SPI/PARALLEL
>10MHz MULTIPLYING BANDWIDTH
12-BIT, SINGLE-/DUAL-CHANNEL
SPI/PARALLEL
>10MHz MULTIPLYING BANDWIDTH
LFCSP/MSOP/TSSOP
8-/10-BIT, SINGLE-/DUAL-CHANNEL
SPI/PARALLEL
>10MHz MULTIPLYING BANDWIDTH
MSOP/TSSOP
AD54xx
AD55xx
AD5543 Specifications
AD5544 Specifications
• Single channel
• Quad channel
• 16-bit resolution
• 16-bit resolution
• ±1 LSB DNL
• ±1 LSB DNL
• ±1 LSB INL
• ±1 LSB INL
• Low noise: 12 nV/√Hz
• 2 mA full-scale current ±20%, with VREF = ±10 V
• Low power: IDD = 10 µA
• 0.9 µs settling time to ±0.1%
• 0.5 µs settling time
• 12 MHz multiplying bandwidth
• 7 MHz multiplying bandwidth
• Midscale glitch of −1 nV/sec
• Analog THD of –103 dB
• Midscale or zero-scale reset
• 2 mA full-scale current ±20%, with VREF = 10 V
• Four separate, 4-quadrant multiplying reference inputs
• Built-in RFB facilitates voltage conversion
• SPI-compatible, 3-wire interface
• SPI-compatible, 3-wire interface
• Simultaneous multichannel change
• Temperature range: −40°C to +125°C
• Temperature range: −40°C to +125°C
• Ultracompact 8-lead MSOP and 8-lead SOIC packages
• Compact 28-lead SSOP; 5 mm × 5 mm, 32-lead LFCSP
4 | Multiplying DACs
Applications
Low Noise LED Control
ADC
MICROCONTROLLER
DAC CONTROL
A
C1
RFB
IOUT1
A1
VDD
AD55xx
AGND
PHOTODIODE +
I/V AMP
VREF
LPF
AGND
Fast Settling Ramp Control on Motors
VDD
VREF
C1
RFB
AD55xx
IOUT1
A1
AGND
MOTOR CONTROL
SYNC SCLK SDIN
AGND
MASS
SPECTROMETER
MICROCONTROLLER
ADC
DETECTOR + SIGNAL
CONDITIONING
1
CH1 200mV
M400ns
A CH1
412mV
Circuits from the Lab™ by Analog Devices is a new design assistance resource that provides engineers
with tested circuit solutions for many common applications. Circuits from the Lab pairs at least two
complementary components, such as an ADC and amplifier, to present a circuit optimized for a targeted
application. Each circuit has been built and tested in the lab and can be easily integrated into designs,
resulting in reduced design risk and faster time to market.
Circuit note documentation accompanies each Circuits from the Lab design and describes the circuit function, benefits, and
implementation in detail, with common variations noted.
View the collection of circuit notes available for multiplying DAC designs at www.analog.com/circuits.
www.analog.com/multiplyingDAC | 5
Applications
Single-Ended-to-Differential Conditioning
A2
C2
RCOM
AC REFERENCE
VREF
ROFS
R1
VDD
C1
IOUT1
AD55xx
1.5V
A3
RFB
DIFFERENTIAL
OUTPUT VOLTAGE
A1
AGND
1.5V
SYNC SCLK SDIN
AGND
1.5V
A4
1.5V
MICROCONTROLLER
*UNCOMMITTED RESISTOR VERSION
Circuit Note CN-0143, Single-Ended-to-Differential Converters for Voltage Output and Current
Output DACs Using the AD8042 Op Amp. www.analog.com/CN0143
Fast Settling Ramp Generation and Offset Control
RFBA
GENERATED WAVEFORM
AD5545
16-BIT
ADR423
3.0V
VREFA
C1
OFFSET
DAC
IOUTA
A1
0V
VDD
AD5621
12-BIT
VOUT
VREFB
AWG
DAC
IOUTB
AGND
For more information on ADI’s
multiplying DAC portfolio see
www.analog.com/multiplyingDAC.
6 | Multiplying DACs
Multiplying DACs
Part Number
Bits
Outputs
Interface
Package
Comments
AD5424
8
1
Parallel
16-lead TSSOP, 20-lead LFCSP
AD5426
8
1
SPI
10-lead MSOP
>10 MHz BW, ±10 V signals; see also AD5425 fast load
AD5450
8
1
SPI
8-lead SOT-23
Small SOT-23 package; see also AD5425 fast load; pin- and softwarecompatible family —12 MHz update rate
AD5425
8
1
SPI, 8-bit load
10-lead MSOP
>10 MHz BW, ±10 V signals; see also AD5426
AD5428
8
2
Parallel
20-lead TSSOP
>10 MHz BW, ±10 V signals
AD5429
8
2
SPI
16-lead TSSOP
>10 MHz BW, ±10 V signals
AD5433
10
1
Parallel
20-lead TSSOP, 20-lead LFCSP
>10 MHz BW, ±10 V signals
AD5432
10
1
SPI
10-lead MSOP
>10 MHz BW, ±10 V signals
AD5451
10
1
SPI
8-lead SOT-23
Small SOT-23 package; pin- and software-compatible family
AD5439
10
2
SPI
16-lead TSSOP
>10 MHz BW, ±10 V signals
AD5440
10
2
Parallel
24-lead TSSOP
>10 MHz BW, ±10 V signals
AD5445
12
1
Parallel
20-lead TSSOP, 20-lead LFCSP
>10 MHz BW, ±10 V signals
AD5443
12
1
SPI
10-lead MSOP
>10 MHz BW, ±10 V signals
AD5452
12
1
SPI
8-lead SOT-23, 8-lead MSOP
DAC8043A
12
1
SPI
8-lead TSSOP
AD5441
12
1
SPI
8-lead LFCSP, 8-lead MSOP
AD5444
12
1
SPI
10-lead MSOP
Higher accuracy version of AD5443; see also AD5452
AD5447
12
2
Parallel
24-lead TSSOP
>10 MHz BW, ±10 V signals
AD5405
12
2
Parallel
40-lead LFCSP
>10 MHz BW, ±10 V signals, uncommitted resistors
AD5449
12
2
SPI
16-lead TSSOP
>10 MHz BW, ±10 V signals
AD5415
12
2
SPI
24-lead TSSOP
>10 MHz BW, ±10 V signals, uncommitted resistors
AD5556
14
1
Parallel
28-lead TSSOP
±1 LSB, 6 MHz BW, ±15 V signals
AD5453
14
1
SPI
8-lead SOT-23, 8-lead MSOP
Small SOT-23 package; pin- and software-compatible family
AD5553
14
1
SPI
8-lead MSOP, 8-lead SOIC_N
4 MHz BW, ±15 V signals
AD5446
14
1
SPI
10-lead MSOP
MSOP version of AD5453; compatible with AD5443, AD5432, and AD5426
AD5557
14
2
Parallel
38-lead TSSOP
±1 LSB, 6 MHz BW, ±15 V signals
AD5555
14
2
SPI
16-lead TSSOP
±1 LSB, 6 MHz BW, ±15 V signals
AD5554
14
4
SPI
28-lead SOP
±1 LSB, 12 MHz BW, ±15 V signals
AD5546/
AD5546A
16
1
Parallel
28-lead TSSOP
±1 LSB, 6 MHz BW, ±15 V signals
AD5543
16
1
SPI
8-lead MSOP, 8-lead SOIC_N
±1 LSB, 6 MHz BW, ±15 V signals
AD5547
16
2
Parallel
38-lead TSSOP
±1 LSB, 6 MHz BW, ±15 V signals
AD5545
16
2
SPI
16-lead TSSOP
±1 LSB, 6 MHz BW, ±15 V signals
AD5544
16
4
SPI
28-lead SSOP, 32-lead LFCSP
±1 LSB, 12 MHz BW, ±15 V signals
>10 MHz BW, ±10 V signals
12 MHz BW, small SOT-23 package; pin- and software-compatible family
>2 MHz bandwidth; see AD5443, also AD5452 and AD5444
Low noise, 1 LSB, 1 μs settling time, LDAC pin, upgrade to DAC8043A
www.analog.com/multiplyingDAC | 7
Op Amp Selection
The performance of a multiplying DAC solution is strongly dependent on the selected op amp to perform the current-to-voltage
conversion. In order to maintain the dc accuracy of the signal, it is important to select an op amp with low bias current and low
offset voltage so as not to swamp the minimum resolution of the DAC’s output. More detail on this is included in the multiplying
DAC’s data sheet.
For applications where a relatively high speed ac or arbitrary signal needs to be multiplied, a high bandwidth/high slew rate
op amp is required to prevent the op amp from degrading the output signal. The gain bandwidth product of an op amp will
be limited by the feedback load it sees with the feedback resistor. To determine what GBW is required, the user needs to be
conscious of the gain configuration. The higher the gain, the lower the bandwidth. As a rule of thumb, a bandwidth of 10 times
the desired frequency for a gain configuration of –1 is generally sufficient.
The slew rate of the op amp is another specification that can limit the multiplying DAC if careful consideration is not given.
As a rule of thumb, for the AD54xx and AD55xx family of DACs, an op amp with a slew rate of 100 V/μs is generally sufficient.
The selection tables below list operational amplifiers that can be used for multiplying applications.
Suitable Op Amps for High Precision Applications
Part Number
OP97
OP1177
AD8675
AD8671
ADA4004-1
AD8607
AD8605
AD8615
AD8616
Supply
Voltage (V)
VOS Maximum
(𝛍V)
IB Maximum
(nA)
0.1 Hz to 10 Hz
Noise (𝛍V p-p)
Supply Current
(𝛍A)
Package
±2 to ±20
±2.5 to ±15
±5 to ±18
±5 to ±15
±5 to ±15
1.8 to 5
2.7 to 5
2.7 to 5
2.7 to 5
25
60
75
75
125
50
65
65
65
0.1
2
2
12
90
0.001
0.001
0.001
0.001
0.5
0.4
0.1
0.077
0.1
2.3
2.3
2.4
2.4
600
500
2300
3000
2000
40
1000
2000
2000
8-lead SOIC, 8-lead PDIP
8-lead MSOP, 8-lead SOIC
8-lead MSOP, 8-lead SOIC
8-lead MSOP, 8-lead SOIC
8-lead SOIC, 5-lead SOT-23
8-lead MSOP, 8-lead SOIC
5-lead WLCSP, 5-lead SOT-23
5-lead TSOT
8-lead MSOP, 8-lead SOIC
Suitable Op Amps for High Speed Applications
Part Number
AD8065
AD8066
AD8021
AD8038
ADA4899
AD8057
AD8058
AD8061
AD8062
AD9631
Supply
Voltage (V)
–3 dB BW
(MHz)
Slew Rate
(V/𝛍s)
VOS Max (𝛍V)
IB Max (nA)
Package
5 to 24
5 to 24
5 to 24
3 to 12
5 to 12
3 to 12
3 to 12
2.7 to 8
2.7 to 8
±3 to ±6
145
145
490
350
600
325
325
320
320
320
180
180
120
425
310
1000
850
650
650
1300
1500
1500
1000
3000
35
5000
5000
6000
6000
10,000
0.006
0.006
10,500
750
100
500
500
350
350
7000
8-lead SOIC, 5-lead SOT-23
8-lead SOIC, 8-lead MSOP
8-lead SOIC, 8-lead MSOP
8-lead SOIC, 5-lead SC70
8-lead LFCSP, 8-lead SOIC
5-lead SOT-23, 8-lead SOIC
8-lead SOIC, 8-lead MSOP
5-lead SOT-23, 8-lead SOIC
8-lead SOIC, 8-lead MSOP
8-lead SOIC, 8-lead PDIP
Analog Devices, Inc.
Worldwide Headquarters
Analog Devices, Inc.
Three Technology Way
P.O. Box 9106
Norwood, MA 02062-9106
U.S.A.
Tel: 781.329.4700
(800.262.5643,
U.S.A. only)
Fax: 781.461.3113
Analog Devices, Inc.
Europe Headquarters
Analog Devices, Inc.
Wilhelm-Wagenfeld-Str. 6
80807 Munich
Germany
Tel: 49.89.76903.0
Fax: 49.89.76903.157
Analog Devices, Inc.
Japan Headquarters
Analog Devices, KK
New Pier Takeshiba
South Tower Building
1-16-1 Kaigan, Minato-ku,
Tokyo, 105-6891
Japan
Tel: 813.5402.8200
Fax: 813.5402.1064
Analog Devices, Inc.
Southeast Asia
Headquarters
Analog Devices
22/F One Corporate Avenue
222 Hu Bin Road
Shanghai, 200021
China
Tel: 86.21.2320.8000
Fax: 86.21.2320.8222
©2010 Analog Devices, Inc. All rights reserved.
Trademarks and registered trademarks are the
property of their respective owners.
Printed in the U.S.A.
BR09270-1.2-12/10
www.analog.com/multiplyingDAC