VS-ETH1506SHM3, VS-ETH1506-1HM3 www.vishay.com Vishay Semiconductors Hyperfast Rectifier, 15 A FRED Pt® FEATURES • Hyperfast recovery time Available • Low forward voltage drop • 175 °C operating junction temperature • Low leakage current TO-263AB (D2PAK) • AEC-Q101 qualified, meets JESD 201 class 1A whisker test TO-262AA Base cathode 2 • Meets MSL level 1, per LF maximum peak of 260 °C 2 J-STD-020, • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 3 Anode 1 N/C 3 Anode 1 N/C VS-ETH1506S-M3 DESCRIPTION / APPLICATIONS Hyperfast recovery rectifiers designed with optimized performance of forward voltage drop, hyperfast recovery time, and soft recovery. VS-ETH1506-1-M3 PRODUCT SUMMARY Package TO-263AB (D2PAK), TO-262AA IF(AV) 15 A VR 600 V VF at IF 1.25 V trr (typ.) 21 ns TJ max. 175 °C Diode variation Single die The planar structure and the platinum doped life time control guarantee the best overall performance, ruggedness and reliability characteristics. These devices are intended for use in PFC Boost stage in the AC/DC section of SMPS, inverters or as freewheeling diodes. The extremely optimized stored charge and low recovery current minimize the switching losses and reduce over dissipation in the switching element and snubbers. ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL TEST CONDITIONS MAX. UNITS 600 V Repetitive peak reverse voltage VRRM Average rectified forward current IF(AV) TC = 139 °C 15 Non-repetitive peak surge current IFSM TC = 25 °C 160 Operating junction and storage temperatures TJ, TStg A -65 to +175 °C ELECTRICAL SPECIFICATIONS (TJ = 25 °C unless otherwise specified) PARAMETER Breakdown voltage, blocking voltage SYMBOL VBR, VR TEST CONDITIONS MIN. TYP. MAX. 600 - - IF = 15A - 1.8 2.45 IF = 15 A, TJ = 150 °C - 1.25 1.6 VR = VR rated - 0.01 15 TJ = 150 °C, VR = VR rated - 20 200 IR = 100 μA UNITS V Forward voltage VF Reverse leakage current IR Junction capacitance CT VR = 600 V - 12 - pF Series inductance LS Measured lead to lead 5 mm from package body - 8.0 - nH Revision: 10-Jul-15 μA Document Number: 94482 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-ETH1506SHM3, VS-ETH1506-1HM3 www.vishay.com Vishay Semiconductors DYNAMIC RECOVERY CHARACTERISTICS (TJ = 25 °C unless otherwise specified) PARAMETER SYMBOL Reverse recovery time trr TEST CONDITIONS MIN. TYP. MAX. IF = 1.0 A, dIF/dt = 100 A/μs, VR = 30 V - 21 26 IF = 1.5 A, dIF/dt = 100 A/μs, VR = 30 V - 25 36 TJ = 25 °C - 29 - TJ = 125 °C UNITS ns - 65 - - 3.9 - - 7.0 - TJ = 25 °C - 60 - TJ = 125 °C - 240 - - 42 - ns - 21 - A - 480 - nC MIN. TYP. MAX. UNITS TJ, TStg -65 - 175 °C Thermal resistance, junction to case RthJC - 1.3 1.51 °C/W Thermal resistance, junction to ambient RthJA Typical socket mount - - 70 Thermal resistance, case to heatsink RthCS Mounting surface, flat, smooth and greased - 0.5 - - 2.0 - g - 0.07 - oz. 6 (5) - 12 (10) kgf · cm (lbf · in) Peak recovery current IRRM Reverse recovery charge Qrr Reverse recovery time trr Peak recovery current IRRM Reverse recovery charge TJ = 25 °C TJ = 125 °C TJ = 125 °C Qrr IF = 15 A dIF/dt = 200 A/μs VR = 390 V IF = 15 A dIF/dt = 800 A/μs VR = 390 V A nC THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Maximum junction and storage temperature range TEST CONDITIONS Weight Mounting torque Case style TO-263AB (D2PAK) ETH1506SH Case style TO-262 ETH1506-1H 1000 100 IR - Reverse Current (μA) IF - Instantaneous Forward Current (A) Marking device TJ = 175 °C 10 TJ = 150 °C TJ = 25 °C 175 °C 100 150 °C 10 125 °C 100 °C 1 75 °C 0.1 50 °C 0.01 25 °C 0.001 0.0001 1 0.5 1.0 1.5 2.0 2.5 3.0 0 100 200 300 400 500 600 VFM - Forward Voltage Drop (V) VR - Reverse Voltage (V) Fig. 1 - Typical Forward Voltage Drop Characteristics Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage Revision: 10-Jul-15 Document Number: 94482 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-ETH1506SHM3, VS-ETH1506-1HM3 www.vishay.com Vishay Semiconductors CT - Junction Capacitance (pF) 1000 100 10 1 0 100 200 300 500 400 600 VR - Reverse Voltage (V) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage ZthJC - Thermal Impedance (°C/W) 10 D = 0.5 1 D = 0.2 D = 0.1 D = 0.05 0.1 D = 0.02 Single Pulse (Thermal Resistance) D = 0.01 0.01 1E-05 1E-04 1E-03 1E-02 1E-01 1E+00 t1 - Rectangular Pulse Duration (s) 180 30 170 25 RMS Limit 160 150 DC 140 130 120 Average Power Loss (W) Allowable Case Temperature (°C) Fig. 4 - Max. Thermal Impedance ZthJC Characteristics 20 D = 0.01 D = 0.02 D = 0.05 D = 0.1 D = 0.2 D = 0.5 DC 15 10 5 0 0 2 4 6 8 10 12 14 16 18 20 22 0 5 10 15 20 25 IF(AV) - Average Forward Current (A) IF(AV) - Average Forward Current (A) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current Fig. 6 - Forward Power Loss Characteristics Revision: 10-Jul-15 Document Number: 94482 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-ETH1506SHM3, VS-ETH1506-1HM3 www.vishay.com Vishay Semiconductors 100 600 90 500 IF = 15 A, 125 °C 80 400 Qrr (nC) trr (ns) 70 60 50 40 IF = 15 A, 125 °C 300 IF = 15 A, 25 °C 200 IF = 15 A, 25 °C 30 100 20 typical value typical value 10 100 0 100 1000 1000 dIF/dt (A/μs) dIF/dt (A/μs) Fig. 7 - Typical Reverse Recovery Time vs. dIF/dt Fig. 8 - Typical Stored Charge vs. dIF/dt VR = 200 V 0.01 Ω L = 70 μH D.U.T. dIF/dt adjust D IRFP250 G S Fig. 9 - Reverse Recovery Parameter Test Circuit (3) trr IF ta tb 0 Qrr (2) IRRM (4) 0.5 IRRM dI(rec)M/dt (5) 0.75 IRRM (1) dIF/dt (1) dIF/dt - rate of change of current through zero crossing (2) IRRM - peak reverse recovery current (3) trr - reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current. (4) Qrr - area under curve defined by trr and IRRM Qrr = trr x IRRM 2 (5) dI(rec)M/dt - peak rate of change of current during tb portion of trr Fig. 10 - Reverse Recovery Waveform and Definitions Revision: 10-Jul-15 Document Number: 94482 4 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-ETH1506SHM3, VS-ETH1506-1HM3 www.vishay.com Vishay Semiconductors ORDERING INFORMATION TABLE Device code VS- E T H 15 06 S TRL H M3 1 2 3 4 5 6 7 8 9 10 1 - Vishay Semiconductors product 2 - 3 - Circuit configuration E = single diode T = TO-220 4 - H = Hyperfast recovery time 5 - Current code (15 = 15 A) 6 - Voltage code (06 = 600 V) 7 - • S = D2PAK - • -1 = TO-262 - • None = tube - • TRL = tape and reel (left oriented, for D2PAK package) - • TRR = tape and reel (right oriented, for D2PAK package) 9 - H = AEC-Q101 qualified 10 - Environmental digit: M3 = halogen-free, RoHS-compliant, and terminations lead (Pb)-free 8 ORDERING INFORMATION (Example) PREFERRED P/N QUANTITY PER TUBE MINIMUM ORDER QUANTITY VS-ETH1506SHM3 50 1000 PACKAGING DESCRIPTION Antistatic plastic tube VS-ETH1506-1HM3 50 1000 Antistatic plastic tube VS-ETH1506STRRHM3 800 800 13" diameter reel VS-ETH1506STRLHM3 800 800 13" diameter reel LINKS TO RELATED DOCUMENTS Dimensions Part marking information Packaging information Revision: 10-Jul-15 TO-263AB (D2PAK) www.vishay.com/doc?95046 TO-262AA www.vishay.com/doc?95419 TO-263AB (D2PAK) www.vishay.com/doc?95444 TO-262AA www.vishay.com/doc?95443 (D2PAK) www.vishay.com/doc?95032 TO-263AB Document Number: 94482 5 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000