Bill of Materials for the NIS5132-35GEVB Evaluation Board Designator Quantity Description Value Tolerance Footprint Manufacturer Manufacturer Part Number NIS5135 NIS5132 I_LIM 5 I_LIM 12 CIN-5 CIN-12 2N7002 10K dv/dt 5 dv/dt 12 R-5 R-12 C-5 C-12 5 volt and 12 volt inputs 1 1 1 1 0 0 1 1 0 0 1 1 1 1 5 volt eFuse 12 volt eFuse Chip Resistor Chip Resistor Optional, not used in board, 0805 chip cap Optional, not used in board, 0805 chip cap Enable FET Enable Res Optional, not used in board, 0603 chip cap Optional, not used in board,0603 chip cap 1kΩ, 1 W, 5% metal film Resister 1kΩ, 1 W, 5% metal film Resister Alum elect cap, 100 uF, 25 V, radial lead Alum elect cap, 100 uF, 25 V, radial lead 22Ω 22Ω 10KΩ 1KΩ 1KΩ 100 uF, 25 V 100 uF, 25 V 5% 5% 5% 5% 5% 20% 20% ON Semiconductor ON Semiconductor Various Various ON Semiconductor Various Panasonic - ECG Panasonic - ECG Panasonic - ECG Panasonic - ECG NIS5135MN1TXG NIS5132MN1TXG Various Various 2N7002L Various ERG-1SJ102A ERG-1SJ102A ECA-1EM101B ECA-1EM101B No No Yes Yes Yes Yes No Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes 1 Banana plug, Blue - - Farnell 150-042 Yes Yes Ground 1 Banana plug, Black - - Farnell 150-040 Yes Yes 5 volt and 12 volt outputs 1 Banana plug, Green - - DFN-10 DFN-10 0603 0603 0805 0805 SOT-23 0603 0603 0603 Axial Axial Radial Radial 20.00mm x 10.00mm 20.00mm x 10.00mm 20.00mm x 10.00mm Farnell 150-041 Yes Yes 11/1/2011 Page 1 of 1 Substitution Allowed Lead Free www.onsemi.com