MPL4700 - MPL4703 CONTROL DEVICES - MMSM PIN AND LIMITER DIODES RoHS Compliant GENERAL DESCRIPTION KEY FEATURES This series of surface mount PIN and Limiter diodes utilize new and unique monolithic MMSM technology. The technology is a package/device integration accomplished at the wafer fabrication level. Since the cathode and anode interconnections utilize precision photolithographic techniques rather than wire bonds, parasitic package inductance is tightly controlled. The package parasitics provide smooth non-resonant functionality through X Band. This series of devices meets RoHS requirements per EU Directive 2002/95/EC. Up to 10W incident RF power handling Antiparallel configuration available Low parasitics LP = 0.02nH Typical CP = 0.04pF Typical Broadband Performance through X-Band Available on Tape & Reel or on Film Frame for pick & place Small, SOD 323 Footprint RoHS Compliant 1 1- These devices are supplied with gold terminations. APPLICATIONS The MPL4700 series of Limiter diodes are design for low to medium power receiver protection. The typical leakage output power for the MPL4701 is +20 dbm versus +24 dbm for the MPL4700. The MPL4702 is optimized for MRI surface coil applications. Receiver protection circuitry frequently requires the antiparallel installation of 2 diodes. Microsemi added antiparallel versions (-406 style) of our standard (-206 style) configurations. GC4702 and GC4703 – 406. APPLICATION/BENEFITS Receiver protection circuits Broadband Switching Economy Switching RF Attenuators MRI ABSOLUTE MAXIMUM RATINGS @ 25C Rating Maximum Leakage Current @80% of minimum Rated VB Operating Temperature Storage Temperature Symbol Value Unit IR 0.5 uA TOP TSTG -55 to +150 -65 to +150 ºC ºC For the most current data, consult MICROSEMI’s website: www.MICROSEMI.com Specifications are subject to change, consult the RFIS factory at (978) 442-5600 for the latest information. MPL4700 - MPL4703 CONTROL DEVICES - MMSM PIN AND LIMITER DIODES RoHS Compliant DEVICE ELECTRICAL PARAMETERS AT 25C VB (V) IR=10μA CT(pF)1 @-10V RS(Ω)2 @1mA RS(Ω)2 @10mA VF If = 100μA (Min) (Max) (Typ) (Max) (Min) Model Number Package Style MPL4700 206 25 0.15 4 2.0a - MPL4701 206 15 0.20 6 2.5a - MPL4702 406 50b 3.0c 12 2.0a 0.45 MPL4703 406 25b 0.3c 6 3.0a 0.73 VF If = 100mA TL Model Number Package Style (Typ) MPL4700 206 - 20 Receiver Protection MPL4701 206 - 10 Receiver Protection MPL4702 406 1.0 30 Anti-parallel Pair MRI Surface Coil Detune MPL4703 406 1.2 20 Receiver Protection (Max) Application Notes: 12- Capacitance is measured at f = 1 MHz. Series Resistance (RS) is measured at f = 100 MHz. Devices are mounted in a package suitable for testing. a. RS is measured at 1 GHz for the MPL series devices. b. Not measured in anti-parallel configuration. c. Vr = 0V. This value is the sum of two junctions. For the most current data, consult MICROSEMI’s website: www.MICROSEMI.com Specifications are subject to change, consult the RFIS factory at (978) 442-5600 for the latest information. MPL4700 - MPL4703 CONTROL DEVICES - MMSM PIN AND LIMITER DIODES RoHS Compliant P AC K AG E ST Y L E 206 For the most current data, consult MICROSEMI’s website: www.MICROSEMI.com Specifications are subject to change, consult the RFIS factory at (978) 442-5600 for the latest information. MPL4700 - MPL4703 CONTROL DEVICES - MMSM PIN AND LIMITER DIODES RoHS Compliant P AC K AG E ST Y L E 406 Revision History Revision Level / Date 1 / 21 October 2013 2 / 17 November 2014 Para. Affected A Description Initial Release Add Part# MPL4703 and Application notes For the most current data, consult MICROSEMI’s website: www.MICROSEMI.com Specifications are subject to change, consult the RFIS factory at (978) 442-5600 for the latest information.