MPP4201 - MPP4205 ® CONTROL DEVICES - MMSM PIN AND LIMITER DIODES RoHS Compliant GENERAL DESCRIPTION KEY FEATURES This series of surface mount PIN and Limiter diodes utilize new and unique monolithic MMSM technology. The technology is a package/device integration accomplished at the wafer fabrication level. Since the cathode and anode interconnections utilize precision photolithographic techniques rather than wire bonds, parasitic package inductance is tightly controlled. The package parasitics provide smooth non-resonant functionality through X Band. This series of devices meets RoHS requirements per EU Directive 2002/95/EC. APPLICATIONS Up to 10W incident RF power handling Low parasitics LP = 0.02nH Typical CP = 0.04pF Typical Broadband Performance through XBand Available on Tape & Reel or on Film Frame for pick & place Small, SOD 323 Footprint RoHS Compliant 1 1- These devices are supplied with gold terminations. The MPP4200 series of PIN diodes can be used in RF circuits as an on/off element, as a switch, or as a current controlled resistor in attenuators extending over the frequency range from UHF through X band. Switch applications include high speed switches (ECM systems), TR switches channel or antenna selection switches (Telcom and WLAN applications), duplexers (radar) and digital phase shifters (phased arrays). These diodes are also used as passive and active limiters for low to moderate RF power levels. Attenuator type applications include amplitude modulators, AGC attenuators and power levelers. APPLICATION/BENEFITS Receiver protection circuits Broadband Switching Economy Switching RF Attenuators MRI ABSOLUTE MAXIMUM RATINGS @ 25C Rating Maximum Leakage Current @80% of minimum Rated VB Operating Temperature Storage Temperature Symbol Value Unit IR 0.5 uA TOP TSTG -55 to +150 -65 to +150 ºC ºC For the most current data, consult MICROSEMI’s website: www.MICROSEMI.com Specifications are subject to change, consult the RFIS factory at (978) 442-5600 for the latest information. MPP4201 - MPP4205 ® CONTROL DEVICES - MMSM PIN AND LIMITER DIODES RoHS Compliant DEVICE ELECTRICAL PARAMETERS AT 25°C VB (V) IR=10μA CT(pF)1 @-10V RS(Ω)2 @0.01mA (Min) (Max) (Typ) RS(Ω)2 @1mA RS(Ω)2 @10mA RS(Ω)2 @20mA (Max) (Max) Model Number Package Style MPP4201 206 70 0.20 2.5 MPP4202 206 50 0.15 2.8 MPP4203 206 50 0.10 3.0 MPP4204 206 25 0.15 MPP4205 206 70 0.15 2.0 250 7-16 5.0 TL Model Number Package Style (Typ) MPP4201 206 150 Switching / Attenuation MPP4202 206 50 Switching MPP4203 206 50 Economy Switching MPP4204 206 20 Switching MPP4205 206 150 Attenuation Application Notes: 12- Capacitance is measured at f = 1 MHz. Series Resistance (RS) is measured at f = 100 MHz. Devices are mounted in a package suitable for testing. a. RS is measured at 1 GHz for the MPL series devices. b. Not measured in anti-parallel configuration. c. Vr = 0V. This value is the sum of two junctions. For the most current data, consult MICROSEMI’s website: www.MICROSEMI.com Specifications are subject to change, consult the RFIS factory at (978) 442-5600 for the latest information. MPP4201 - MPP4205 ® CONTROL DEVICES - MMSM PIN AND LIMITER DIODES RoHS Compliant TYPICAL RS VS If @ 25C 10000.00 MPP4205 1000.00 Rs @ 100 MHz (ohms) MPP4202/MPP4203 100.00 MPP4201 MPP4204 10.00 1.00 0.10 0.001 0.010 0.100 1.000 10.000 IF (mA) For the most current data, consult MICROSEMI’s website: www.MICROSEMI.com Specifications are subject to change, consult the RFIS factory at (978) 442-5600 for the latest information. 100.000 MPP4201 - MPP4205 ® CONTROL DEVICES - MMSM PIN AND LIMITER DIODES RoHS Compliant P AC K AG E ST Y L E 206 Revision History Revision Level / Date 2 / 16 April 2013 3 / 21 October 2013 Para. Affected Applications / Device Electricals Description Initial Release Revised For the most current data, consult MICROSEMI’s website: www.MICROSEMI.com Specifications are subject to change, consult the RFIS factory at (978) 442-5600 for the latest information.