SO T2 3 SOT23 Tape reel SMD; standard product orientation 12NC ending 185 Rev. 1 — 15 November 2012 Packing information 1. Packing method Barcode label Reel Barcode label Printed plano box QA Seal Barcode label Circular sprocket holes opposite the label side of reel Cover tape Tape Carrier tape bra314 Fig 1. Ten reel pack for SMD Table 1. Packing information Package version 12NC ending Reel dimensions d x w (mm) [1] SPQ/PQ (pcs) Reels per box Outer box dimensions l x w x h (mm) SOT23 185 180 x 8 30000 10 186 x 186 x 115 [1] d = reel diameter; w = tape width. SOT23 NXP Semiconductors Tape reel SMD; standard product orientation 12NC ending 185 2. Product orientation Standard product orientation SOT23 direction of feed Fig 2. Product orientation in carrier tape 3. Carrier tape dimensions 4 W K0 A0 B0 P1 mdb579 direction of feed Fig 3. Carrier tape dimensions Table 2. Carrier tape dimensions In accordance with IEC 60286-3. A0 (mm) B0 (mm) K0 (mm) T (mm) P1 (mm) W (mm) 3.1 2.7 1.15 - 4.0 8 Limited warranty and liability © NXP B.V. 2012. Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: [email protected] Date of release: 15 November 2012 Document identifier: SOT23_185 All rights reserved.