STSW-BNRG-Vxx BLE stack image packages Data brief Description The package contains a Bluetooth Low Energy stack firmware image supporting the upgradable BlueNRG and BlueNRG-MS Bluetooth® Low Energy network processor, which is a low power Bluetooth Smart IC, compliant with the Bluetooth specification. The image is provided in two formats: *.c: suitable for device firmware reprogramming during volume manufacturing of customer boards. *.img: suitable for device firmware programming on bench with the ST GUI for prototype bring-up and characterization. Features Firmware image for use with upgradable BlueNRG and BlueNRG-MS Bluetooth® Low Energy network processor Provided in binary format only, as it is not intended to be modified February 2016 The device comes pre-programmed with a production-ready stack image, the version of which may change at any time without notice. The software version of the preloaded stack image can be retrieved through a specific API command (refer to the SDK documentation for further details). New stack image firmware may be made available by ST in the future and will be offered free-of-charge to end users through ww.st.com. End users will be able to upgrade parts with the newly downloaded stack image through the ST provided software tools and reference code. Firmware is provided in compiled form since it is not intended for modification by users. DocID028978 Rev 1 For further information contact your local STMicroelectronics sales office 1/3 www.st.com Revision history 1 STSW-BNRG-Vxx Revision history Table 1: Document revision history 2/3 Date Version Changes 09-Feb-2016 1 Initial release. DocID028978 Rev 1 STSW-BNRG-Vxx IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2016 STMicroelectronics – All rights reserved DocID028978 Rev 1 3/3