Product Overview NCV7710: Door Module Driver (Lock Driver) For complete documentation, see the data sheet Product Description The NCV7710 is a powerful Driver-IC for automotive body control systems. The IC is designed to control lock motor in the door of a vehicle. With the monolithic full-bridge driver stage, the IC is able to control lock motor. The NCV7710 is controlled thru a 24 bit SPI interface with in-frame response. Features • Operating Range from 5.5 V to 28 V • Two High-Side and Two Low-Side Drivers Connected as Halfbridges - 2 Half-bridges Iload = 6 A; Rdson = 150 mΩ @ 25°C • Programmable Soft-start Function to Drive Loads with Higher Inrush Currents as Current Limitation Value • Support of PWM Control Frequency Outside the Audible Noise • Support of Active Freewheeling to Reduce Power Dissipation • Multiplex Current Sense Analog Output for Advanced Load Monitoring • Very Low Current Consumption in Standby Mode • Charge Pump Output to Control an External Reverse Polarity Protection MOSFET • 24-Bit SPI Interface for Output Control and Diagnostic • Protection Against Short Circuit, Overvoltage and Overtemperature For more features, see the data sheet Applications • • • • End Products De-centralized Door Electronic Systems Rear Door Electronic Unit Body Control Units (BCUs) Several H?bridge Applications • Automobiles Part Electrical Specifications Product Compliance Status Number of Drivers VCC Max (V) NCV7710DQR2G AEC Qualified Active 2 28 V(BR)GSS Max (V) V(BR)DSS Max ID Max (A) (V) PPAP Capable Pb-free Halide free For more information please contact your local sales support at www.onsemi.com Created on: 6/30/2016 rDS(on) Max (Ω) Tj Max (°C) Package Type 0.3 SSOP-36 EP 150