Download

Plan the beginning ...
... anticipate the end.
ELECTRONIC ENCLOSURES
1
About us
The ROSE Systemtechnik GmbH, a
company of the Phoenix Mecano AG
Switzerland group, is a complete supplier
of enclosure systems and meets the
highest demands of quality. Extensive
services such as finishing, tooling and
testing of enclosure systems round off our
range of services.
Our products are mostly put to use
in industrial surroundings and therefore
have to withstand the toughest
conditions. Sales of our enclosure
systems takes place worldwide, and our
own branch offices provide optimum
support for our customers in important
markets.
Our extensive product programme is
completed with a wide range of electronic
components, which we can offer you, for
your individual applications, all from the
same supplier.
A little company philosophy
In our founding year 1969 a guiding
principle, still very much in use today, was
in the foreground even then: whatever is
thought up today can be obsolete
tomorrow.
Faithful to this motto, we develop
products which are significantly in
advance of the technological state of the
art, and which take up a leading position
in the market. To know today what will
be important tomorrow - this is an absolute necessity for a successful company.
For this reason we at ROSE consider
the highest in specialist expertise and
readiness to provide innovation to be the
most important factor in success, in
addition to rigorous implementation of
customer requirements - both today and
tomorrow.
Our motto "Well thought out from
beginning to end“ is so much more than
just a succinct advertising slogan, it
represents our whole company
philosophy in just one sentence.
You are our number 1!
You, our customers, are our reason for
existence. We are aware of this fact to
the fullest possible extent. For this reason
we make great efforts, permanently and
continuously, to fulfill your requirements
in as perfect a way as possible. With a
wide range of products, continuous
innovation, the largest service range in
the industry by a long way, accessories,
and much more.
2
Challenge us!
We're looking forward to your assignment.
International presence
We are also glad to be of service
internationally. Wherever we can help you
with solutions "in all aspects of
enclosures", we are just around the
corner. Support for our international
customers takes place directly or via our
own branches (Phoenix Mecano) or
agencies in all important industrial
markets. We consider ourselves to be your
reliable and expert partners– worldwide!
Everything from the same supplier
As a leading manufacturer of enclosure systems and a service provider with a
complete range "in all aspects of enclosures", we can offer you so much more
than just standards out of a catalogue. Based on our extremely wide product range
of enclosures for many various applications, we are capable of offering you individual
products or completely finished, equipped or tested systems to your requirements.
The choice is yours!
Quality and service – but of course
We are continuously striving to
improve our service and to widen our
range of services. The foundation for this
solution-orientated way of thinking is
provided by our outstandingly trained
and highly-motivated staff. Our
continuous and clearly structured further training programs ensure that we are
permanently able to offer you better
service. Our aim is to give you the best
performance every day – for your benefit!
By the way: We are certified to ISO
9001. Of course.
You can find us on the internet...
... at www.rose-pw.de. We will do our best to provide you with continuous and
up-to-date information about innovations, new products, trade fair dates, products
and applications and much more. Have a look around our website, we're looking
forward to seeing you there.
3
Contents
Multitronic
Universal electronic PCB enclosures
Page 5 - 8
Multitronic TS/TS-F
DIN rail compatible electronic PCB enclosures
Page 9 - 14
Multitronic SE
Panel mounting enclosure system in variable depth
Page 15 - 17
SE 200
Panel mounting enclosure system in variable length and height
Page 18 - 20
NoVoTronic
Aluminium enclosure system for data, PC- and measurement in variable length
Page 21 - 32
NoVoTronic 19
Enclosure system for 19“ units
Page 33 - 40
Profitronic I
Standard electronic PCB enclosures IP 40 / IP 65
Page 41 - 44
Profitronic I/F / I/A
Electronic PCB enclosures with variable front plates IP 40 / IP 65
Page 45 - 53
Profitronic 19 / 19U
MCR enclosure system for 19“ units
Page 54 - 62
Pult Pofitronic
Console enclosure system
Page 63 - 64
Wavetronic
4
Electronic desktop enclosure system
Page 65 - 68
General technical informations
Page 69 - 71
Multitronic
• EMC Aluminium enclosure system for MCR technology
• Integrated guide slots for PCB’s
• External mounting slots with spring nuts
Technical data
Material:
DIN EN 573 EN AW-AlMgSi
Ingress protection:
IP 40 to EN 60529
Painting:
powder coating
Colour:
RAL 9005, jet black
Included in delivery
Enclosure with two aluminium lids, screwed.
Temperature range:
-40°C to +100°C
5
Multitronic
Programme range
Type
Order No.
Multitronic 1
77.31 00 00
External enclosure
dimensions
W x L x H (mm)
105 x 185 x 36
Weight
(g)
Version
Profile
max. PCBdimensions
(mm)
480
1 PCB guide
1
100 x 180
1
160 x 180
1
2 x 57 x 180
2 mounting slots
Multitronic 2
77.32 00 00
165 x 185 x 65
1378
2 PCB guides
integrated heat sink surfaces
2 mounting slots
Multitronic 3
77.33 00 00
208 x 185 x 54
820
4 PCB guides
front plate sheet aluminium
1 x 87 x 180
lid with fixing fins
Multitronic 4
77.34 00 00
190 x 185 x 51
500
6 PCB guides
1 x 204 x 180
1
160 x 180
2
100 x 180
2
100 x 180
2
100 x 180
2
100 x 180
2
100 x 180
arched shape
fixing fin on enclosure body
Multitronic 11
77.11 00 00
105 x 185 x 50
500
2 PCB guides
4 mounting slots
Multitronic 12
77.12 00 00
105 x 185 x 80
674
3 PCB guides
4 mounting slots
Multitronic 13
77.13 00 00
105 x 185 x 110
660
4 PCB guides
4 mounting slots
Multitronic 21
77.21 00 00
105 x 185 x 56
790
1 PCB guide
upper profile as heat sink
2 mounting slots
Multitronic 22
77.22 00 00
105 x 185 x 86
904
2 PCB guides
upper profile as heat sink
2 mounting slots
Special length
77.99 99 99 8 for all profiles
Accessories
External mounting brackets (4 pcs.)
77.00 01 00*
Snap foot, plastic, for rail mounting on TS 35
77.00 35 01
Table feet (set, self-adhesive, black)
10.07 00 19
Mounting feet (2 pcs.), grey
07.70 00 81
* except for Multitronic 3 and 4
Technical modifications reserve
6
Multitronic
Version
Multitronic 1
Multitronic 2
Order No. 77.31 00 00
Order No. 77.32 00 00
Multitronic 3
Multitronic 4
Order No. 77.33 00 00
Order No. 77.34 00 00
Multitronic 11
Multitronic 12
Multitronic 13
Order No. 77.11 00 00
Order No. 77.12 00 00
Order No. 77.13 00 00
Multitronic 21
Multitronic 22
Order No. 77.21 00 00
Order No. 77.22 00 00
7
Multitronic
Accessories
External mounting brackets
for wall mounting on Multitronic 1, 11 - 22 and 2
Order No. 77.00 01 00
A
Multitronic 1; 11-22
123
Multitronic 2
184
Snap foot, plastic
for rail mounting on TS 35
Order No. 77.00 35 01
Enclosure
8
Multitronic TS/TS-F
• Aluminium electronic enclosure for MCR technology
• Variable length version using profile technology
• Single or double-skinned enclosure construction with heat sink option
Technical data
Material:
DIN EN 573 EN AW-AlMgSi
Ingress protection:
IP 40 to EN 60529
Painting:
powder coating
Colour:
RAL 9005, jet black
Included in delivery
Enclosure with two aluminium lids, screwed.
Temperature range:
-40°C to +100°C
9
Multitronic TS/TS-F
Programme range
Enclosure
Order No.
type
Ext. encl. dimensions
Weight
max. PCB dimensions
W x H x T (mm)
(g)
in mm
DIN rails
Wall
Free print terminal/
mounting
plug connector access
Closed
design
TS 111
77.01 11 00
46 x 105 x 72
197
42,6 x 100
•
TS 111-F
77.41 11 00
46 x 105 x 72
197
42,6 x 100
•
TS 112
77.01 12 00
46 x 105 x 72
220
42,6 x 100
•
TS 112-F
77.41 12 00
46 x 105 x 72
220
42,6 x 100
•
TS 121
77.01 21 00
46/76 x 105 x 61
630
42,6/72,6 x 100
•
TS 121-F
77.41 21 00
46/76 x 105 x 61
630
42,6/72,6 x 100
•
TS 122
77.01 22 00
46/76 x 105 x 61
240
42,6/72,6 x 100
TS 122-F
77.41 22 00
46/76 x 105 x 61
240
42,6/72,6 x 100
TS 141
77.01 41 00
46/105 x 105 x 57
410
42,6/100,6 x 100
•
TS 141-F
77.41 41 00
46/105 x 105 x 57
410
42,6/105,6 x 100
•
TS 142
77.01 42 00
46/105 x 105 x 57
300
42,6/100,6 x 100
•
•
TS 142-F
77.41 42 00
46/105 x 105 x 57
300
42,6/100,6 x 100
•
•
TS 221
77.02 21 00
76 x 105 x 51
300
72,6 x 100
•
TS 221-F
77.42 21 00
76 x 105 x 51
300
72,6 x 100
•
TS 222
77.02 22 00
76 x 105 x 51
224
72,6 x 100
•
•
TS 222-F
77.42 22 00
76 x 105 x 51
224
72,6 x 100
•
•
TS 231
77.02 31 00
76 x 105 x 64,5
700
72,6 x 100
•
TS 231-F
77.42 31 00
76 x 105 x 64,5
700
72,6 x 100
•
TS 232
77.02 32 00
76 x 105 x 64,5
235
72,6 x 100
TS 232-F
77.42 32 00
76 x 105 x 64,5
235
72,6 x 100
TS 331
77.03 31 00
76 x 105 x 78
270
72,6 x 100
•
TS 331-F
77.43 31 00
76 x 105 x78
270
72,6 x 100
•
TS 332
77.03 32 00
76 x 105 x 78
290
72,6 x 100
•
•
TS 332-F
77.43 32 00
76 x 105 x 78
290
72,6 x 100
•
•
TS 441
77.04 41 00
105 x 185 x 45
700
100,6 x 180
•
TS 441-F
77.44 41 00
105 x 185 x 45
700
100,6 x 180
•
TS 442
77.04 42 00
105 x 185 x 45
420
100,6 x 180
•
•
TS 442-F
77.44 42 00
105 x 185 x 45
420
100,6 x 180
•
•
TS 461
77.04 61 00
105 x 185 x 66
660
100,6 x 180
•
TS 461-F
77.44 61 00
105 x 185 x 66
660
100,6 x 180
•
TS 462
77.04 62 00
105 x 185 x 66
480
100,6 x 180
•
•
TS-462-F
77.44 62 00
105 x 185 x 66
480
100,6 x 180
•
•
TS 662
77.06 62 00
105 x 185 x 87
730
100,6 x 180
•
•
TS-662-F
77.46 62 00
105 x 185 x 87
730
100,6 x 180
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Accessories
Spare snap foot for TS 32 and TS 35 for snapping to enclosure
77.00 35 00
Snap foot plastic, for rail mounting on TS 35
77.00 35 01
Metal snap foot (set = 2 pcs.) for TS 35 for screwing onto enclosure
77.00 36 00
Table feet (set, self adhesive, black)
10.07 00 19
Mounting feet (2 pcs.), grey
07.70 00 81
10
•
Multitronic TS/TS-F
Kind of mounting
Picture 1
Multitronic TS xx1
with snap foot
Picture 2
Multitronic TS xx1-F
Front plate version with snap foot
Picture 3
Multitronic TS xx2
Wall mounting
Picture 4
Multitronic TS xx2-F
Front plate version for wall mounting
Mounting version
mounting side
Snap foot mounting
profile side
type
TS 111
TS 221
TS 231
TS 331
TS 441
TS 461
TS 121
TS 141
pict. 1
Snap foot mounting
front plate side
TS 111-F
TS 221-F
TS 231-F
TS 331-F
TS 441-F
TS 461-F
TS 121-F
TS 141-F
pict. 2
Wall mounting
profile side
TS 112
TS 222
TS 232
TS 332
TS 442
TS 462
TS 662
TS 122
TS 142
pict. 3
Wall mounting
front plate side
TS 112-F
TS 222-F
TS 232-F
TS 332-F
TS 442-F
TS 462-F
TS 662-F
TS 122-F
TS 142-F
pict. 4
kind of mounting
1 = snap foot mounting
2 = wall mounting
TS 111-F
Profile 1
Profile 2
Profile combination
11
Multitronic TS / TS-F
Dimensions
Standard profile length 100 mm
Multitronic TS 11X
Multitronic TS 12X
Multitronic TS 14X
Multitronic TS 22X
Multitronic TS 23X
Multitronic TS 33X
Multitronic TS 46X
Multitronic TS 662
Standard profile length 180 mm
Multitronic TS 44X
12
Multitronic TS / TS-F
Dimensions
Type
A
B
C
D
77.41 12 00
72
66
64
56
77.41 22 00
76
81
68
71
77.41 42 00
105
77
96
67
77.42 22 00
76
71
68
61
77.42 32 00
76
84,5
68
74,5
77.43 32 00
76
98
68
88
77.44 42 00
105
65
96
55
77.44 62 00
105
86
96
76
77.46 62 00
105
107
96
97
Multitronic TS 111 to 662 with lid
Multitronic TS 112-F to 662-F
A = profile width
L = profile length
Accessories
Spare snap foot
for insert into dovetail groove suitable for TS 32
and TS 35
Plastic snap foot
for rail mounting on TS 35
Metal snap foot set (2 pcs.)
for screwing on lid / front plate
suitable for TS 35
Order No. 77.00 35 01
Order No. 77.00 35 00
Order No. 77.00 36 00
13
Applications Multitronic TS / TS-F
14
Multitronic SE
• Aluminium electronic enclosure for MCR technology
• Variable depth version using profile technology
• Norm sizes 96 x 48 and 96 x 96 mm
Technical data
Material:
DIN EN 573 EN AW-AlMgSi
Ingress protection:
front side: IP 65 to EN 60529
mounting side: IP 40 to EN 60529
Painting:
powder coating
Colour:
Included in delivery
Enclosure with seal (for front plate and for
panel mounting) rear panel lid and
mounting bracket (2x)
RAL 9005, jet black
Temperature range:
-30°C to +80°C
by front cover frame -20°C to +80°C
15
Multitronic SE
Programme range
Type
Order No.
Dimensions
Weight
Front cover frame
WxLxH
(g)
self adhesive
Front plate
Spare mounting set
MT-SE 48/1
77.70 05 01
96 x 82 x 48
185
77.70 99 03
77.70 99 01
77.70 99 05
MT-SE 48/2
77.70 05 02
96 x 116 x 48
350
77.70 99 03
77.70 99 01
77.70 99 05
MT-SE 48/3
77.70 05 03
96 x 138 x 48
245
77.70 99 03
77.70 99 01
77.70 99 05
MT-SE 48/So
77.70 05 99
special length
77.70 99 03
77.70 99 01
77.70 99 05
MT-SE 96/1
77.70 10 01
96 x 82 x 96
365
77.70 99 04
77.70 99 02
77.70 99 05
MT-SE 96/2
77.70 10 02
96 x 116 x 96
455
77.70 99 04
77.70 99 02
77.70 99 05
MT-SE 96/3
77.70 10 03
96 x 138 x 96
505
77.70 99 04
77.70 99 02
77.70 99 05
MT-SE 96/So
77.70 10 99
special length
77.70 99 04
77.70 99 02
77.70 99 05
Dimensions
Multitronic SE 48
Mulitronic SE 96
L = profile length
L = profile length
Enclosure type
L
Enclosure type
L
77.70 05 01
82
77.70 01 01
82
77.70 05 02
116
77.70 01 02
116
77.70 05 03
138
77.70 01 03
138
16
Multitronic SE
Accessories
countersink DIN 74-Am3
Front plate for Multitronic SE 48
Front frame for Multitronic SE 48
Order No. 77.70 99 01
Order No. 77.70 99 03
countersink DIN 74-Am3
Front plate for Multitronic SE 96
Front frame for Multitronic SE 96
Order No. 77.70 99 02
Order No. 77.70 99 04
17
Applications SE 200
18
SE 200
• Aluminium electronic enclosure for MCR technology
• Variable width and height version using profile technology
• Constant profile depths 85 and 175 mm
Technical data
Material:
DIN EN 573 EN Aw-AlMgSi
Ingress protection:
front side: IP 65 to EN 60529
mounting side: IP 40 to EN 60529
Painting:
powder coating
Included in delivery
Enclosure with screwed rear panel; front
plate and fixing elements please order
separately
Colour:
RAL 9005, jet black
Temperature range:
-40°C to +80°C
19
SE 200
Programme range
Type
Order No.
Dimensions (mm)
Front plate
PCB holder
WxHxT
SE 200-1
65.10 07 09
96 x 72 x 85
65.00 00 01
65.00 04 09
SE 200-2
65.10 07 18
96 x 72 x 175
65.00 00 01
65.00 04 18
SE 200-3
65.10 10 09
96 x 96 x 85
65.00 00 03
65.00 04 09
SE 200-4
65.10 10 18
96 x 96 x 175
65.00 00 03
65.00 04 18
SE 200-5
65.10 14 09
96 x 144 x 85
65.00 00 05
65.00 04 09
SE 200-6
65.10 14 18
96 x 144 x 175
65.00 00 05
65.00 04 18
SE 200-7
65.10 19 09
96 x 192 x 85
65.00 00 07
65.00 04 09
SE 200-8
65.10 19 18
96 x 192 x 175
65.00 00 07
65.00 04 18
SE 200-9
65.10 24 09
96 x 240 x 85
65.00 00 09
65.00 04 09
SE 200-10
65.10 24 18
96 x 240 x 175
65.00 00 09
65.00 04 18
SE 200-11
65.14 14 09
144 x 144 x 85
65.00 00 11
65.00 04 09
SE 200-12
65.14 14 18
144 x 144 x 175
65.00 00 11
65.00 04 18
SE 200-13
65.14 19 09
144 x 192 x 85
65.00 00 13
65.00 04 09
SE 200-14
65.14 19 18
144 x 192 x 175
65.00 00 13
65.00 04 18
SE 200-15
65.14 24 09
144 x 240 x 85
65.00 00 15
65.00 04 09
SE 200-16
65.14 24 18
144 x 240 x 175
65.00 00 15
65.00 04 18
SE 200-17
65.14 29 09
144 x 288 x 85
65.00 00 17
65.00 04 09
SE 200-18
65.14 29 18
144 x 288 x 175
65.00 00 17
65.00 04 18
SE 200-19
65.19 19 09
192 x 192 x 85
65.00 00 19
65.00 04 09
SE 200-20
65.19 19 18
192 x 192 x 175
65.00 00 19
65.00 04 18
SE 200-21
65.19 24 09
192 x 240 x 85
65.00 00 21
65.00 04 09
SE 200-22
65.19 24 18
192 x 240 x 175
65.00 00 21
65.00 04 18
SE 200-23
65.19 29 09
192 x 288 x 85
65.00 00 23
65.00 04 09
SE 200-24
65.19 29 18
192 x 288 x 175
65.00 00 23
65.00 04 18
SE 200-25
65.19 34 09
192 x 336 x 85
65.00 00 25
65.00 04 09
SE 200-26
65.19 34 18
192 x 336 x 175
65.00 00 25
65.00 04 18
Special size
65.99 00 00
65.00 00 99
Accessories
External fastening set for panel mounting (4 pcs.)
65.00 01 00
Fastening clamp set for front plate (10 pcs.)
65.00 02 00
PCB holder 60 mm long (2 pcs.)
65.00 04 09
PCB holder 140 mm long (2 pcs.)
65.00 04 18
Fastening set for front plate (85 mm)
65.00 05 09
Fastening set for front plate (200 mm)
65.00 05 18
Dimensions
Front view
Profile 85
External dimension B
max. front plate dimension = B - 24 mm
External dimension H
max. view area = H - 31 mm
max. front plate dimen. = H - 24 mm
max. view area = B - 31 mm
Profile 175
Fitting dimensions
fitting dimension to DIN 43700 = B/H -4
20
NoVoTronic
• Aluminium profile enclosure system in 5 dimensions for data,
PC and MCR technology
• External screw channels guarantee internal area without splinter
• Integrated guide grooves for PCB’s
• External system groove (except NoVoTronic 200)
• Variable length by profile system
Technical data
Material:
enclosure profile: DIN EN 573 EN AW-AlMgSi
enclosure lid: DIN EN 1706 EN AC-AlSi 12 (Fe)
Ingress protection:
IP 65 to EN 60529
Painting:
powder coating
Colour:
enclosure body and enclosure lid:
RAL 9005, jet black
multi function profile:
RAL 3003, ruby red
EMC:
optional EMC version
Included in delivery
Enclosure with 2 Aluminium diecast lids and
2 multi-function profiles, not screwed
Temperature range:
-40°C to +90°C
transparent cover: -40°C to +60°C
21
NoVoTronic
Programme range
Enclosure type
Order No.
Order No.
Weight
External enclosure
EMC
(g)
dimensions
Internal enclosure
dimensions
W x H x D (mm)
W x H x D (mm)
NoVoTronic 80
NoVo-Tronic 80-100
07.50 10 10
07.51 10 10
480
106 x 49 x 120
80 x 36 x 100
NoVo-Tronic 80-160
07.50 10 11
07.51 10 11
660
106 x 49 x 180
80 x 36 x 160
NoVo-Tronic 80-200
07.50 10 12
07.51 10 12
780
106 x 49 x 220
80 x 36 x 200
NoVo-Tronic 80-SL
07.50 10 99
07.51 10 99
106 x 49 x SL
80 x 36 x SL
NoVo-Tronic 100-100
07.50 20 10
07.51 20 10
550
126 x 49 x 120
100 x 36 x 100
NoVo-Tronic 100-160
07.50 20 11
07.51 20 11
750
126 x 49 x 180
100 x 36 x 160
NoVo-Tronic 100-200
07.50 20 12
07.51 20 12
880
126 x 49 x 220
100 x 36 x 200
NoVo-Tronic 100-SL
07.50 20 99
07.51 20 99
126 x 49 x SL
100 x 36 x SL
NoVo-Tronic 130-130
07.50 25 10
07.51 25 10
880
157 x 69 x 150
130 x 57 x 130
NoVo-Tronic 130-160
07.50 25 11
07.51 25 11
1020
157 x 69 x 180
130 x 57 x 160
NoVo-Tronic 130-200
07.50 25 12
07.51 25 12
1200
157 x 69 x 220
130 x 57 x 200
NoVo-Tronic 130-SL
07.50 25 99
07.51 25 99
157 x 69 x SL
130 x 57 x SL
NoVo-Tronic 160-160
07.50 30 10
07.51 30 10
1500
190 x 90 x 180
160 x 76 x 160
NoVo-Tronic 160-200
07.50 30 11
07.51 30 11
1800
190 x 90 x 220
160 x 76 x 200
NoVo-Tronic 160-300
07.50 30 12
07.51 30 12
2500
190 x 90 x 320
160 x 76 x 300
NoVo-Tronic 160-SL
07.50 30 99
07.51 30 99
190 x 90 x SL
160 x 76 x SL
NoVo-Tronic 200-220
07.50 40 10
07.51 40 10
2500
233 x 121 x 240
200 x 105 x 220
NoVo-Tronic 200-280
07.50 40 11
07.51 40 11
3060
233 x 121 x 300
200 x 105 x 280
NoVo-Tronic 200-330
07.50 40 12
07.51 40 12
3450
233 x 121 x 350
200 x 105 x 330
NoVo-Tronic 200-SL
07.50 40 99
07.51 40 99
233 x 121 x SL
200 x 105 x SL
NoVoTronic 100
NoVoTronic 130
NoVoTronic 160
NoVoTronic 200
SL = special length
Accessories
Order No.
NoVoTronic 80
NoVoTronic 100
Wall profile 80/100-100
07.50 90 11
X
X
NoVoTronic 130
NoVoTronic 160
Wall profile 80/100-160
07.50 90 12
X
X
Wall profile 80/100-200
07.50 90 13
X
X
Wall profile 80/100-SL
07.50 90 99
X
X
Wall profile 130/160-130
07.50 91 11
X
X
Wall profile 130/160-160
07.50 91 12
X
X
Wall profile 130/160-200
07.50 91 13
X
X
Wall profile 130/160-300
07.50 91 14
X
X
Wall profile 130/160-SL
07.50 91 99
X
X
Lid wall holder 80/100
07.50 90 02
X
NoVo wall holder P80
07.50 90 03
X
NoVo wall holder P100
07.50 90 04
NoVo wall holder P130
07.50 90 15
NoVo wall holder P160
07.50 90 05
Foot / connection element 80
07.50 90 06
Foot / connection element 100
07.50 90 07
Foot / connection element 130
07.50 90 14
Foot / connection element 160
07.50 90 08
Battery insert 9V Block
83.90 00 03
X
X
X
X
Battery insert 4xAA
83.90 00 06
X
X
X
X
PCB profile 200-220
07.50 92 11
X
PCB profile 200-280
07.50 92 12
X
PCB profile 200-330
07.50 92 13
X
PCB profile 200-SL
07.50 92 99
PCB profile adjustable 80/100
07.50 92 14
PCB profile adjustable 130
07.50 92 15
PCB profile adjustable 160
07.50 92 16
X
Transparent cover 160
07.50 90 10
X
SL = special length
22
NoVoTronic 200
X
X
X
X
X
X
X
X
X
X
X
X
X
X
NoVoTronic
Dimensions
NoVoTronic 80
l
23
NoVoTronic
Dimensions
NoVoTronic 100
l
24
NoVoTronic
Dimensions
NoVoTronic 130
l
25
NoVoTronic
Dimensions
NoVoTronic 160
l
26
NoVoTronic
Dimensions
NoVoTronic 200
l
27
NoVoTronic
Accessories
Transparent cover 160
for protection of electro-mechanical components in enclosure lid; ingress protection IP 40
Order No. 07.50 90 10
Lid wall holder 80/100 (2 pieces)
to screw onto lid for swivelling wall fixing.
Displacement:
NoVoTronic 80 + 40°
NoVoTronic 100 + 30°
Order No. 07.50 90 02
X = enclosure length
28
NoVoTronic
Accessories
Wall profile (2 pieces)
to insert in system groove for wall fixing
Order No. see page 22
NoVoTronic 80, 100
NoVoTronic 130
NoVoTronic 160
Sideview NoVoTronic 130, 160
29
NoVoTronic
Accessories
NoVo-Wall holder
for fixing and connection to command system or walls
Order No.
for type
dimensions
A
B
C
07.50 90 03
NoVoTronic 80
74,0
99,0
41,2
07.50 90 04
NoVoTronic 100
90,0
119,0
41,2
07.50 90 15
NoVoTronic 130
116,5
150,0
51,2
07.50 90 05
NoVoTronic 160
150,0
183,5
61,5
Foot / connection element (1 piece)
for towering or mechanical connection of enclosures
Order No.
30
for type
dimensions
A
B
C
07.50 90 06
NoVoTronic 80
107,0
33,5
20,0
07.50 90 07
NoVoTronic 100
127,0
33,5
20,0
07.50 90 14
NoVoTronic 130
158,0
51,8
25,0
07.50 90 08
NoVoTronic 160
189,4
64,4
25,0
NoVoTronic
Accessories
PCB profile adjustable for NoVoTronic 80/100
Order No.
type
dimensions
07.50 92 14
80/100
40,5
14,9
07.50 92 15
130
60,9
14,9
07.50 92 16
160
79,7
18,9
A
B
PCB profile for NoVoTronic 200
Order No.
for type
07.50 92 11
PCB profile 200-220
07.50 92 12
PCB profile 200-280
07.50 92 13
PCB profile 200-330
07.50 92 99
PCB profile SL
31
NoVoTronic
Accessories
Battery insert
Order No.
32
83.90 00 03
for 9V Block
83.90 00 06
for 4 x AA
NoVoTronic 19
•
•
•
•
•
Variable possibility to combine connection compartment and profile
2 enclosure sizes 28HP and 42HP
Rack for 19“ inserts (height 3RU)
Optional with transparent cover
Variable length by profile technic
Technical data
Material:
enclosure profile: DIN EN 573 EN AW-AlMgSi
connection compartment:
DIN EN 1706 EN AC-AlSi 12 (Fe)
Ingress protection:
IP 65 to EN 60529
outdoor application on request
Painting:
powder coating
Colour:
RAL 7043, traffic grey B
EMC:
Included in delivery
Enclosure system - depending on version
either with connection compartment,
swivel intermediate frame, profile and
screwed lid.
optional EMC version
Temperature range:
seal: -40°C to +90°C
transparent cover: -40°C to +60°C
33
NoVoTronic 19
Programme range
Order No.
Order No. EMC
Dimensions
W x L x H (mm)
Connection compartment
07.60 28 01
07.61 28 01
256 x 270 x 110
connection compartment, screwed lid
07.60 28 02
07.61 28 02
256 x 270 x 118
connection compartment, screwed front panel frame
07.60 28 03
07.61 28 03
256 x 270 x 139
connection compartment, screwed front panel frame and transparent cover
07.60 28 04
07.61 28 04
256 x 270 x 118
connection compartment, hinged front panel frame
07.60 28 05
07.61 28 05
256 x 270 x 139
connection compartment, screwed front panel frame and transparent cover
07.60 42 01
07.61 42 01
327 x 270 x 110
connection compartment, screwed lid
07.60 42 02
07.61 42 02
327 x 270 x 118
connection compartment, screwed front panel frame
07.60 42 03
07.61 42 03
327 x 270 x 139
connection compartment, screwed front panel frame and transparent cover
07.60 42 04
07.61 42 04
327 x 270 x 118
connection compartment, hinged front panel frame
07.60 42 05
07.61 42 05
327 x 270 x 139
connection compartment, hinged front panel frame and transparent cover
Connection compartment with profile and intermediate frame
07.60 28 11
07.61 28 11
256 x 270 x 297
connection compartment, swivel intermediate frame, profile and screwed lid
07.60 28 12
07.61 28 12
256 x 270 x 305
connection compartment, swivel intermediate frame, profile and front panel frame
07.60 28 15
07.61 28 15
256 x 270 x 326
connection compartment, swivel intermediate frame,
07.60 42 11
07.61 42 11
327 x 270 x 297
connection compartment, swivel intermediate frame, profile and screwed lid
07.60 42 12
07.61 42 12
327 x 270 x 305
connection compartment, swivel intermediate frame, profile and front panel frame
07.60 42 15
07.61 42 15
327 x 270 x 326
connection compartment, swivel intermediate frame,
profile and front panel frame with transparent cover
profile and front panel frame with transparent cover
Profile
07.60 28 21
07.61 28 21
213.7 x 160.8 x 231
07.60 28 22
07.61 28 22
214.3 x 161.4 x 239
lid, profile and front panel frame
07.60 28 25
07.61 28 25
214.3 x 161.4 x 260
lid, profile and front panel frame with transparent cover
07.60 42 21
07.61 42 21
248.8 x 160.8 x 231
profile and screwed lid
07.60 42 22
07.61 42 22
285.4 x 161.4 x 239
lid, profile and front panel frame
07.60 42 25
07.61 42 25
285.4 x 161.4 x 260
lid, profile and front panel frame with transparent cover
profile and screwed lid
Accessories
07.60 28 81
19" mounting frame for 28HP
07.60 42 81
19" mounting frame for 42HP
07.60 00 01
transparent cover with cylinder lock 28 HP
07.60 00 02
special lock with socket wrench for connection compartment (mounted)
07.60 00 03
external brackets for wall mounting for enclosure without connection compartment (set =2 pcs)
07.60 00 04
spare latch for connection compartment lid (plastic)
07.60 00 05
transparent cover with cylinder lock 42 HP
07.60 28 85
partition wall (28HP), detachable for separating connection compartment (2 areas)
07.60 42 85
partition wall (42HP), detachable for separating connection compartment (2 areas)
07.61 28 30
aluminium front plate 28 HP, for front panel frame EMC
07.61 42 30
aluminium front plate 42 HP, for front panel frame EMC
07.00 00 10
PCB guide rail fixed (set = 10 pcs)
07.00 00 11
PCB guide rail variable (set = 10 pcs)
07.28 00 30
mounting plate for connection compartment (28HP version)
07.42 00 30
mounting plate for connection compartment (42HP version)
10.07 00 19
table feet (set, self-adhesive, black)
07.70 00 81
Mounting feet (2 pcs) grey
07.60 28 30
aluminium front plate 28HP, for front panel frame
07.60 42 30
aluminium front plate 42HP, for front panel frame
34
NoVoTronic 19
Dimensions
Connection compartment, screwed lid
Type
Order No.
Order No. EMC
Dimensions
A
B
C
D
E
28HP
07.60 28 01
07.61 28 01
256,1
224,8
213,7
229,9
215,8
42HP
07.60 42 01
07.61 42 01
327,2
295,9
284,8
301,0
287,0
fixing point for
TS 15/TS 35
Connection compartment, screwed front panel frame
Type
Order No.
Order No. EMC
Dimensions
A
B
C
D
E
F
28HP
07.60 28 02
07.61 28 02
256,1
224,8
214,3
215,9
142,9
229,9
42HP
07.60 42 02
07.61 42 02
327,2
295,9
285,4
301,0
214,0
287,0
fixing point for
TS 15/TS 35
Connection compartment, screwed front panel frame and transparent cover
Type
Order No.
Order No. EMC
Dimensions
A
B
C
D
E
F
28HP
07.60 28 03
07.61 28 03
256,1
224,8
214,3
215,9
142,9
229,9
42HP
07.60 42 03
07.61 42 03
327,2
295,9
285,4
301,0
214,0
287,0
fixing point for
TS 15/TS 35
35
NoVoTronic 19
Dimensions
Connection compartment, hinged front panel frame
Type
Order No.
Order No. EMC
Dimensions
A
B
C
D
E
F
28HP
07.60 28 04
07.61 28 04
256,1
224,8
214,3
215,9
142,9
229,9
42HP
07.60 42 04
07.61 42 04
327,2
295,9
285,4
301,0
214,0
287,0
fixing point for
TS 15/TS 35
Connection compartment, hinged front panel frame and transparent cover
Type
Order No.
Order No. EMC
Dimensions
A
B
C
D
E
F
28HP
07.60 28 05
07.61 28 05
256,1
224,8
214,3
215,9
142,9
229,9
42HP
07.60 42 05
07.61 42 05
327,2
295,9
285,4
301,0
214,0
287,0
fixing point for
TS 15/TS 35
Connection compartment, swivel intermediate frame, profile and screwed lid
Type
Order No.
Order No. EMC
Dimensions
A
B
C
D
E
28HP
07.60 28 11
07.61 28 11
213,7
224,8
256,1
229,9
215,8
42HP
07.60 42 11
07.61 42 11
284,8
295,8
327,2
301,0
287,0
fixing point for
TS 15/TS 35
36
NoVoTronic 19
Dimensions
Connection compartment, swivel intermediate frame, profile and front panel frame
Type
Order No.
Order No. EMC
Dimensions
A
B
C
D
E
F
28HP
07.60 28 12
07.61 28 12
214,3
224,8
256,1
229,9
142,9
215,8
42HP
07.60 42 12
07.61 42 12
285,4
295,8
327,2
301,0
214,0
287,0
fixing point for
TS 15/TS 35
Connection compartment, swivel intermediate frame, profile and front panel frame with transparent cover
Type
Order No.
Order No. EMC
Dimensions
A
B
C
D
E
F
28HP
07.60 28 15
07.61 28 15
214,3
224,8
256,1
229,9
142,9
215,8
42HP
07.60 42 15
07.61 42 15
285,4
295,8
327,2
301,0
214,0
287,0
fixing point for
TS 15/TS 35
Profile and screwed lid
Type
Order No.
Order No. EMC
28HP
07.60 28 21
07.61 28 21
42HP
07.60 42 21
07.61 42 21
37
NoVoTronic 19
Dimensions
Lid, profile and front panel frame
Type
Order No.
Order No. EMC
Dimensions
A
B
C
28HP
07.60 28 22
07.61 28 22
214,3
213,7
142,9
42HP
07.60 42 22
07.61 42 22
285,4
284,8
214,0
Lid, profile and front panel frame with transparent cover
38
Type
Order No.
Order No. EMC
Dimensions
A
B
C
28HP
07.60 28 25
07.61 28 25
214,3
213,7
142,9
42HP
07.60 42 25
07.61 42 25
285,4
284,8
214,0
NoVoTronic 19
Accessories
Cylinder lock for transparent cover
Mounting frame
Type
Order No.
19“ - 28HP
07.60 28 81
19“ - 42HP
07.60 42 81
Special lock with socket wrench for connection
compartment
Order No. 07.60 00 01
Order No. 07.60 00 02
Mounting brackets, set (2 pcs.)
Spare latch for lid connection compartment
Order No. 07.60 00 03
Order No. 07.60 00 04
Partition wall for separating connection
compartment
Type
Order No.
19“ - 28HP
07.60 28 85
19“ - 42HP
07.60 42 85
39
NoVoTronic 19
Accessories
Board guides for PCB‘s
Mounting plate - connection compartment
Foot elements
Type
Order No.
Type
Order No.
Type
Order No.
ficed (set = 10 pcs.)
07.00 00 10
19“ - 28HP
07.28 00 30
Self adhesive table feet
10.07 00 19
variable (set = 10 pcs.)
07.00 00 11
19“ - 42HP
07.42 00 30
Mounting feet (2 pcs.)
07.70 00 81
Aluminium front plate
Type
Order No.
19“ - 28HP
07.60 28 30
19“ - 42HP
07.60 42 30
40
Profitronic I
• Aluminium electronic enclosure for telecommunication
and MCR technology
• Variable length version using profile technology
• Screw-down fins integrated into sides
• Different lid versions depending on enclosure type
• Integrated guide grooves for PCB’s
Technical data
Material:
DIN EN 573 EN AW-AlMgSi
Ingress protection:
IP 65 or IP 40 to EN 60529
depending on lid versions
Painting:
powder coating
Colour:
Included in delivery
Enclosure with two sheet aluminium or
cast lids, screwed
RAL 9005, jet black
Temperature range:
-30°C to +80°C
41
Profitronic I
Programme range
Type
Order No.
External enclosure
dimensions*
B x L x H (mm)
Version
Weight
(g)
Ingress
protection
max. PCB dimensions
(mm)
07.01
07.01 01 17
105 x 175 x 45
2 sheet aluminium lids without seal,
510
IP 40
100 x 170
580
IP 40
100 x 170
standard length = 170 mm
07.02
07.02 01 17
105 x 175 x 69
2 sheet aluminium lids without seal,
standard length = 170 mm
07.03
07.03 12 22
196/166 x 239 x 106
2 cast aluminium flat lids with seal,
2420
IP 65
100/160 x 220
07.03 13 22
196/166 x 232 x 106
cast aluminium flat lids and mounting rear panel
2240
IP 40
100/160 x 220
770
IP 65
100 x 180
790
IP 65
100 x 180
standard length = 220 mm
07.10
07.10 06 18
105 x 195 x 73,5
2 cast aluminium flat lids with seal
standard length = 180 mm
07.11
07.11 06 18
105 x 195 x 49
2 cast aluminium flat lids with seal
standard length = 180 mm
* Dimensions without fixing brackets
42
Profitronic I
Dimensions
Version IP 40
Type 07.01
Type 07.02
Type 07.03 (07.03 13 22)
43
Profitronic I
Dimensions
Version IP 65
Type 07.11
198 (total height)
Type 07.10
198 (total height)
Type 07.03 (07.03 12 22)
239 (total height)
44
Profitronic I/F, I/A
•
•
•
•
Aluminium electronic enclosures for MCR technology and automation
Variable length version using profile technology
Enclosure system with different front lid and rear panel version
Integrated guide grooves for PCB’s
Technical data
Material:
DIN EN 573 EN AW-AlMgSi
Ingress protection:
IP 65 or IP 40 to EN 60529
depending on lid version
Painting:
powder coating
Colour:
enclosure profile: RAL 7035, light grey
Included in delivery
Enclosure with two sheet aluminium or cast
lids, screwed; version with protective collar
lid have self-adhesive anodized aluminium
front panel is added separate
enclosure lid: RAL 7030, stone grey
Temperature range:
-40°C to +80°C
cover: -20°C to +60°C
45
Profitronic I/F, I/A
Programme range
Type
Order No.
External enclosure
dimensions*
W x L x H (mm)
Version
07.05
07.05 20 12
104,5 x 129 x 84,5
2 sheet aluminium lids without seal
IP 40
80/100 x 125
07.05 21 12
104,5 x 129 x 84,5
Sheet aluminium lid and sheet aluminium mounting rear panel without seal
IP 40
80/100 x 125
07.05 22 12
111,5 x 147 x 91,5
2 cast aluminium flat lids with seal
IP 65
80/100 x 125
07.05 23 12
111,5 x 149 x 91,5
Cast aluminium flat lid and cast aluminium mounting rear panel with seal
IP 65
80/100 x 125
07.05 24 12
111,5 x 181 x 91,5
2 cast aluminium protective collar lids with seal
IP 65
80/100 x 125
07.05 25 12
111,5 x 164 x 91,5
1 cast aluminium protective colar lid and 1 cast aluminium flat lid with seal
IP 65
80/100 x 125
07.05 26 12
111,5 x 166 x 91,5
Cast alum. protective collar lid and cast alum. mounting rear panel with seal
IP 65
80/100 x 125
07.06 20 18
165 x 184 x 105
2 sheet aluminium lids without seal
IP 40
100/160 x 180
07.06 21 18
165 x 184 x 105
Sheet aluminium lid and sheet aluminium mounting rear panel without seal
IP 40
100/160 x 180
07.06 22 18
172 x 202 x 112
2 cast aluminium flat lids with seal
IP 65
100/160 x 180
07.06 23 18
172 x 204 x 112
Cast aluminium flat lid and cast aluminium mounting rear panel with seal
IP 65
100/160 x 180
07.06 24 18
172 x 236 x 112
2 cast aluminium protective collar lids with seal
IP 65
100/100 x 180
07.06 25 18
172 x 219 x 112
1 cast aluminium protective collar lid and 1 cast aluminium flat lid with seal
IP 65
100/160 x 180
07.06 26 18
172 x 221 x 112
Cast alum. protective collar lid and cast alum. mounting rear panel with seal
IP 65
100/160 x 180
07.06 27 18
173 x 204 x 113
1 cast aluminium front plate lid and 1 cast aluminium flat lid with seal
IP 65
100/160 x 180
07.06 28 18
173 x 206 x 113
Cast aluminium front plate lid and cast alum. mounting rear panel with seal
IP 65
100/160 x 180
07.06 29 18
173 x 225 x 113
Transparent cover, cast aluminium front plate lid and cast aluminium flat lid
IP 65
100/160 x 180
07.06 30 18
173 x 227 x 133
Transparent cover, cast alum. front plate lid and cast alum. mounting rear panel IP 65
100/160 x 180
07.07 20 18
196 x 184 x 166,5
2 sheet aluminium lids without seal
IP 40
160/189 x 180
07.07 21 18
196 x 184 x 166,5
Sheet aluminium lid and sheet aluminium mounting rear panel without seal
IP 40
160/189 x 180
07.07 22 18
203 x 202 x 166,5
2 cast aluminium flat lids with seal
IP 65
160/189 x 180
07.07 23 18
203 x 204 x 166,5
Cast aluminium flat lid and cast aluminium mounting rear panel with seal
IP 65
160/189 x 180
07.07 24 18
203 x 236 x 166,5
2 cast aluminium protective collar lids with seal
IP 65
160/189 x 180
07.07 25 18
203 x 219 x 166,5
1 cast aluminium protective collar lid and 1 cast aluminium flat lid with seal
IP 65
160/189 x 180
07.07 26 18
203 x 221 x 166,5
Cast alum. protective collar lid and cast alum. mounting rear panel with seal
IP 65
160/189 x 180
07.07 27 18
204 x 204 x 166,5
1 cast aluminium front plate lid and 1 cast aluminium flat lid with seal
IP 65
160/189 x 180
07.07 28 18
204 x 206 x 166,5
Cast alum. front plate lid and cast alum. mounting rear panel with seal
IP 65
160/189 x 180
07.07 29 18
204 x 225 x 166,5
Transparent cover, cast aluminium front plate lid and cast aluminium flat lid
IP 65
160/189 x 180
07.07 30 18
204 x 227 x 166,5
Transparent cover, cast alum. front plate lid and cast alum. mounting rear panel IP 65
160/189 x 180
07.09 00 15
172 x 238 x 203
Cast aluminium protective collar lid, connection enclosure with
IP 65
100/160 x 145
07.06
07.07
07.09
Ingress
max. PCB
protection dimensions
(mm)
cast aluminium lid and cast aluminium mounting rear panel,
length of front profile = 145 mm
* Dimensions without fixing brackets
Accessories
Transparent cover for protective collar lid with knurled lock for 07.06
07.80 80 01
Transparent cover for front plate lid for 07.06
07.80 80 03
Transparent cover for front plate lid for 07.07
07.80 80 04
Table feet (set, self adhesive, black)
10.07 00 19
Mounting feet (2 pcs.), grey
07.70 00 81
46
Profitronic I/F, I/A
Profitronic I/F
IP 40
Version with two sheet aluminium lids
Version with sheet aluminium lid and cast
aluminium mounting rear panel
Type
Order No.
Weight (g)
Type
Order No.
Weight (g)
07.05
07.05 20 12
570
07.05
07.05 21 12
590
07.06
07.06 20 18
1100
07.06
07.06 21 18
1160
07.07
07.07 20 18
1750
07.07
07.07 21 18
1850
Profitronic I/F
IP 65
Version with two cast aluminium flat lids (with
seal)
Version with cast aluminium front plate lid and
cast aluminium flat lid (with seal)
Version with cast aluminium protective collar lid
and cast aluminium flat lid (with seal)
Type
Order No.
Weight (g)
Type
Order No.
Weight (g)
Type
Order No.
Weight (g)
07.05
07.05 22 12
650
07.06
07.06 27 18
1372
07.05
07.05 25 12
720
07.06
07.06 22 18
1300
07.07
07.07 27 18
2192
07.06
07.06 25 18
1380
07.07
07.07 22 18
2100
07.07
07.07 25 18
2200
47
Profitronic I/F, I/A
Profitronic I/F
IP 65
Version with transparent cover, cast aluminium
front plate lid and cast aluminium flat lid (with
seal)
Version with two aluminium protective collar
lids (with seal)
Version with cast aluminium flat lid and cast
aluminium mounting rear panel (with seal)
Type
Order No.
Weight (g)
Type
Order No.
Weight (g)
Type
Order No.
Weight (g)
07.06
07.06 29 18
1380
07.05
07.05 24 12
785
07.05
07.05 23 12
685
07.07
07.07 29 18
2200
07.06
07.06 24 18
1460
07.06
07.06 23 18
1360
07.07
07.07 24 18
2300
07.07
07.07 23 18
2150
Version with cast aluminium front plate lid and
cast aluminium mounting rear panel (with seal)
Version with cast aluminium protective collar lid
and cast aluminium mounting rear panel (with
seal)
Version with transparent cover, cast aluminium
front panel lid and cast aluminium mounting
rear panel (with seal)
Type
Order No.
Weight (g)
Type
Order No.
Weight (g)
Type
Order No.
Weight (g)
07.06
07.06 28 18
1380
07.05
07.05 26 12
755
07.06
07.06 30 18
1440
07.07
07.07 28 18
2200
07.06
07.06 26 18
1440
07.07
07.07 30 18
2270
07.07
07.07 26 18
2270
48
Profitronic I/F, I/A
Profitronic I/A
PCB enclosure with connection compartment
Order No. 07.09 00 15
49
Profitronic I/F, I/A
Dimensions
Profile 07.05
Profile 07.06
Profile 07.07
50
Profitronic I/F, I/A
Dimensions
Cast aluminium front plate lid
Type
A
B
C
D
E
F
07.06
173
113
130
92
155
95
07.07
204
175
161
154
186
157
Cast aluminium protective collar lid
Type
A
B
C
D
E
F
G
07.05
112
92
94
74
85
-
26
07.06
172,5
112,5
155
95
145
-
26
07.07
203
174
155
157
174
80
28
106 for order no.: 07.80 80 03
168 for order no.: 07.80 80 04
Cast aluminium front plate lid with transparent cover
51
Profitronic I/F, I/A
Dimensions
Transparent cover for cast aluminium protective collar lid
Sheet aluminium lid
Type
A
B
C
D
07.05
85
105
74
94
07.06
105
165
95
155
07.07
167
196
157
186
Sheet aluminium mounting rear panel
Type
A
B
C
D
E
F
G
07.05
105
112
94
74
85
100
4,5
07.06
135
165
155
95
140
120
5,5
07.07
196
196
186
157
165
182
5,5
52
Profitronic I/F, I/A
Dimensions
Cast aluminium flat lid
Type
A
B
C
D
E
F
G
07.05
112
92
94
74
85
-
9
07.06
172,5 112,5 155
95
145
-
9
07.07
203
157
174
80
11
174
186
G
Cast aluminium mounting rear panel
I
Type
A
B
C
D
E
F
G
H
I
07.05
112
112
85
100
85
-
94
74
11
07.06
172,5 135
140
120
145
-
155
95
11
07.07
203
165
182
174
80
186
157
13
196
53
Applications Profitronic 19 / Profitronic 19U
54
Profitronic 19 / Profitronic 19 universal
•
•
•
•
•
Enclosure in variable length version using profile technology
Standard construction or version with connection compartment
Optional Polycarbonate transparent cover
Profitronic 19: integrated 19“ rack (height 3HU): 19, 28, 42HP
Profitronic 19 U: aluminium electronic enclosures in 3 sizes
Technical data
Material:
enclosure body: DIN EN 573 EN AW-AlMgSi
connection compartment:
DIN EN 1706 EN AC-AlSi 12 (Fe)
Ingress protection:
IP 65 to EN 60529
outdoor application on request
Colour:
enclosure body and connection compartment:
RAL 7035, light grey
enclosure lid and external bracket:
RAL 7030, stone grey
Painting:
powder coating
Opening angle:
connection compartment and transparent cover
Included in delivery
Enclosure system - depending on version
either with cast aluminium lids, connection
compartment or transparent cover, fixing
elements please order separately
110°
Temperature range:
lid seal: -40°C to +80°C
transparent cover: -40°C to +70°C
55
Profitronic 19 / Profitronic 19 universal
Profitronic 19
Programme range
Enclosure
19" mounting
19"mounting frame
Front plate
type
frame
with transparent cover
lid
Front lid
Front plate lid
Dimensions*
and transparent cover
W x L x H (mm)
Enclosure with connection compartment standard (63,5 mm)
19HP
07.19 11 00
07.19 21 00
07.19 31 00
07.19 33 00**
07.19 23 00
148 x 236 x 241
28HP
07.28 11 00
07.28 21 00
07.28 31 00
07.28 33 00**
07.28 23 00
191 x 236 x 241
42HP
07.42 11 00
07.42 21 00
07.42 31 00
07.42 33 00**
07.42 23 00
265 x 236 x 241
Enclosure with conntection compartment deep (103,5 mm)
19HP
07.19 11 01
07.19 21 01
07.19 31 01
07.19 33 01**
07.19 23 01
148 x 276 x 241
28HP
07.28 11 01
07.28 21 01
07.28 31 01
07.28 33 01**
07.28 23 01
191 x 276 x 241
42HP
07.42 11 01
07.42 21 01
07.42 31 01
07.42 33 01**
07.42 23 01
265 x 276 x 241
Enclosure without connection compartment
19HP
07.19 12 00
07.19 22 00
07.19 32 00
-
-
148 x 235 x 149
28HP
07.28 12 00
07.28 22 00
07.28 32 00
-
-
191 x 235 x 149
42HP
07.42 12 00
07.42 22 00
07.42 32 00
-
-
265 x 235 x 149
* Length without lid
** Enclosure length is equal to connection compartment depth
Profitronic 19U
Programme range
Enclosure
19" mounting frame
Dimensions
type
with transparent cover
W x L x H (mm)
Front plate lid
Dimensions
W x L x H (mm)
Enclosure with connection compartment (63,5 mm)
19HP
07.19 21 11
148 x 285 x 241
07.19 31 11
148 x 280 x 241
28HP
07.28 21 11
191 x 285 x 241
07.28 31 11
191 x 280 x 241
42HP
07.42 21 11
265 x 285 x 241
07.42 31 11
265 x 280 x 241
Enclosure without connection compartment
19HP
07.19 22 11
148 x 263,5 x 149
07.19 32 11
148 x 258,5 x 149
28HP
07.28 22 11
191 x 263,5 x 149
07.28 32 11
191 x 258,5 x 149
42HP
07.42 22 11
265 x 263,5 x 149
07.42 32 11
265 x 258,5 x 149
Accessories
19
19U
External fixings for enclosure with connection compartment (set 2 pcs.)
07.00 01 00
•
•
External fixings for enclosure without connection compartment (set 2 pcs.)
07.00 02 00
•
•
Special lock with socket wrench for connection compartment (mounted)
07.00 00 17
•
•
Turning handle for transparent cover (mounted)
07.00 00 18
•
•
Cylinder lock for transparent cover (mounted)
07.00 00 19
•
•
Board guides for PCB’s, fixed (set 10 pcs.)
07.00 00 10
Board guides for PCB’s, variable (set 10 pcs.)
07.00 00 11
Type 07.19
07.19 00 20
•
07.28
07.28 00 20
•
07.42
07.42 00 20
•
Type 07.19
07.19 00 10
•
07.28
07.28 00 10
•
07.42
07.42 00 10
•
Type 07.19
07.19 00 30
•
•
07.28
07.28 00 30
•
•
07.42
07.42 00 30
•
•
Table feet (set, self adhesive, black)
10.07 00 19
•
•
Mounting feet (2 pcs.), grey
07.70 00 81
Insulating strip to fix bus boards (set 2 pcs.)
Aluminium profile (Z-rails) to fix connector bars (set 2 pcs.)
Mounting plate for connection compartment
56
Profitronic 19 / Profitronic 19 universal
Dimensions Profitronic 19
Enclosure without connection compartment with 19“ mounting frame
Type
Order No.
Weight (kg)
Dimensions
A
B
C
19HP
07.19 12 00
1,4
148
98
18 x 5,08 = 91,44
28HP
07.28 12 00
2,0
191
144
27 x 5,08 = 137,16
42HP
07.42 12 00
3,0
265
215
41 x 5,08 = 208,28
Enclosure without connection compartment with front plate lid
Type
Order No.
Weight (kg)
Dimensions
A
B
19HP
07.19 32 00
1,7
148
100
28HP
07.28 32 00
2,5
191
143
42HP
07.42 32 00
3,6
265
217
57
Profitronic 19 / Profitronic 19 universal
Dimensions Profitronic 19
Enclosure without connection compartment with 19“ mounting frame and transparent cover
Type
Order No.
Weight (kg)
Dimensions
A
B
19HP
07.19 22 00
1,5
148
101
28HP
07.28 22 00
2,2
191
144
42HP
07.42 22 00
3,3
265
218
Enclosure with connection compartment with 19“ mounting frame
Type
Order No.
Weight (kg)
Dimensions
A
B
C
Connector compartment standard
19HP
07.19 11 00
2,2
148
98
18 x 5,08 = 91,44
28HP
07.28 11 00
3,3
191
144
27 x 5,08 = 137,16
42HP
07.42 11 00
5,0
265
215
41 x 5,08 = 208,28
Connector compartment deep
19HP
07.19 11 01
3,0
148
98
18 x 5,08 = 91,44
28HP
07.28 11 01
4,0
191
144
27 x 5,08 = 137,16
42HP
07.42 11 01
6,0
265
215
41 x 5,08 = 208,28
DIN rail TS 15 fixing point
58
DIN rail TS 15 fixing point
Profitronic 19 / Profitronic 19 universal
Dimensions Profitronic 19
Enclosure with connection compartment with front plate lid
Type
Order No.
Weight (kg)
Dimensions
A
B
Connection compartment standard
19HP
07.19 31 00
2,5
148
100
28HP
07.28 31 00
3,8
191
143
42HP
07.42 31 00
5,6
265
217
Connection compartment deep
19HP
07.19 31 01
3,2
148
100
28HP
07.28 31 01
4,2
191
143
42HP
07.42 31 01
6,2
265
217
DIN rail TS 15 fixing point
DIN rail TS 15 fixing point
Enclosure with connection compartment with 19“ mounting frame and transparent cover
Type
Order No.
Weight (kg)
Dimensions
A
B
Connection compartment standard
19HP
07.19 21 00
2,4
148
101
28HP
07.28 21 00
3,5
191
144
42HP
07.42 21 00
5,3
265
218
Connection compartment deep
19HP
07.19 21 01
3,2
148
101
28HP
07.28 21 01
4,2
191
144
42HP
07.42 21 01
6,2
265
218
DIN rail TS 15 fixing point
DIN rail TS 15 fixing point
59
Profitronic 19 / Profitronic 19 universal
Dimensions Profitronic 19
Enclosure with connection compartment with front lid
Type
Order No.
Weight (kg)
Dimensions
A
B
Connection compartment standard
19HP
07.19 33 00
1,75
148
94
28HP
07.28 33 00
2,0
191
137
42HP
07.42 33 00
2,45
265
211
Connection compartment deep
19HP
07.19 33 01
2,3
148
94
28HP
07.28 33 01
2,6
191
137
42HP
07.42 33 01
3,25
265
211
DIN rail TS 15 fixing point
DIN rail TS 15 fixing point
Enclosure with connection compartment with front plate lid and transparent cover
Type
Order No.
Weight (kg)
Dimensions
A
B
Connection compartment standard
19HP
07.19 23 00
1,9
148
101
28HP
07.28 23 00
2,15
191
144
42HP
07.42 23 00
2,6
265
218
Connection compartment deep
19HP
07.19 23 01
2,45
148
101
28HP
07.28 23 01
2,75
191
144
42HP
07.42 23 01
3,45
265
218
DIN rail TS 15 fixing point
60
DIN rail TS 15 fixing point
Profitronic 19 / Profitronic 19 universal
Dimensions Profitronic 19U
Enclosure without connection compartment / mounting frame and transparent cover
Width (type)
Order No.
Weight (kg)
Dimensions
A
B
96,5 (19HP)
07.19 22 11
1,5
148
101
142,2 (28HP)
07.28 22 11
2,2
191
144
213,3 (42HP)
07.42 22 11
3,3
265
218
Enclosure without connection compartment / front plate lid
Width (type)
Order No.
Weight (kg)
Dimensions
A
B
96,5 (19HP)
07.19 32 11
1,7
148
100
142,2 (28HP)
07.28 32 11
2,5
191
143
213,3 (42HP)
07.42 32 11
3,6
265
217
61
Profitronic 19 / Profitronic 19 universal
Dimensions Profitronic 19U
Enclosure with connection compartment / mounting frame with transparent cover
Width (type)
Order No.
Weight (kg)
Dimensions
A
B
96,5 (19HP)
07.19 21 11
2,2
148
98
142,2 (28HP)
07.28 21 11
3,3
191
144
213,3 (42HP)
07.42 21 11
5,0
265
215
DIN rail TS 15 fixing point
Enclosure with connection compartment / front plate lid
Width (type)
Order No.
Weight (kg)
B
96,5 (19HP)
07.19 31 11
2,5
148
100
142,2 (28HP)
07.28 31 11
3,8
191
143
213,3 (42HP)
07.42 31 11
5,6
265
217
DIN rail TS 15 fixing point
62
Dimensions
A
Pult Profitronic
• Aluminium electronic enclosure for console applications
• Variable length version using profile technology
• Enclosure with integrated guide grooves for PCBs
Technical data
Material:
enclosure body: DIN EN 573 EN AW-AlMgSi
sides: diecast aluminium
Ingress protection:
IP 65 to EN 60529
Colour:
RAL 7035, light grey
Painting:
Included in delivery
Enclosure system with 2 cast aluminium
lids and front plate screwed
powder coating
Temperature range:
-40°C to +80°C
63
Pult Profitronic
Programme range
Type
Order No.
07.04
max. PCB dimensions
Weight
(mm)
(g)
07.04 14 24
201 x 241 x 121/47,5
100 / 189
3200
07.04 14 36
201 x 362 x 121/47,5
100 / 189
4860
07.04 14 48
201 x 483 x 121/47,5
100 / 189
6480
Dimensions
Order No.
A
B
07.04 14 24
211,5
241,5
07.04 14 36
332,5
362,5
07.04 14 48
453,5
483,5
64
External enclosure dimensions*
W x L x H (mm)
Wavetronic
•
•
•
•
•
Aluminium desktop enclosure for MCR technology
Individual height versions by profile technology
Stacking capability using special foot shape
Contact-uninsulated internal enclosure walls
Internal groove for spring nuts M4 and M5
Technical data
Material:
half shell: DIN EN 1706 EN AC-AlSi 12 (Fe)
profile: DIN EN 573 EN AW-AlMgSi
Ingress protection:
IP 40 to EN 60529
Colour combination:
enclosure RAL 7035, light grey
foot elements RAL 7024, graphite grey
enclosure RAL 9005, jet black
foot elements RAL 3003, ruby red
Painting:
Included in delivery
powder coating
Enclosure system with foot/head
elements, front plate/rear panel please
order separately
Temperature range:
-40°C to +80°C
65
Wavetronic
Programme range
Enclosure type
Order No.
Enclosure ext. dimensions*
Weight
Colour
Front plate/rear panel
Front plate
W x L x H (mm)
(g)
combination
(set, 2 pcs.)
connector area
Wavetronic 1
07.70 01 01
324 x 268 x 55
2300
grey/anthracite
07.70 00 91
287 x 37
Wavetronic 1
07.70 02 01
324 x 268 x 55
2300
black/red
07.70 00 91
287 x 37
Wavetronic 2
07.70 01 02
324 x 268 x 101
2700
grey/anthracite
07.70 00 92
287 x 83
Wavetronic 2
07.70 02 02
324 x 268 x 101
2700
black/red
07.70 00 92
287 x 83
Wavetronic 3
07.70 01 03
324 x 268 x 147
3100
grey/anthracite
07.70 00 93
287 x 129
Wavetronic 3
07.70 02 03
324 x 268 x 147
3100
black/red
07.70 00 93
287 x 129
Wavetronic 4
07.70 01 04
324 x 268 x 194
3500
grey/anthracite
07.70 00 94
287 x 176
Wavetronic 4
07.70 02 04
324 x 268 x 194
3500
black/red
07.70 00 94
287 x 176
Wavetronic special height
07.70 01 99
324 x 268 x SH**
grey/anthracite
07.70 00 99
287 x SH***
Wavetronic special height
07.70 02 99
324 x 268 x SH**
black/red
07.70 00 99
287 x SH***
*
**
***
dimensions without foot elements
front panel fitting area + 18
min. special height = 75; max. special height = 300
Accessories
Mounting feet (2 pcs.), grey
07.70 00 81
Carrying handle
07.70 00 82
19" insert set (53HP / 3HU)
07.70 00 83
Spring nuts M4 (4 pcs.)
29.00 00 50
Spring nuts M5 (8 pcs.)
10.03 60 01
Wavetronic 1
Wavetronic 2
Wavetronic 3
Wavetronic 4
66
Wavetronic
Dimensions
Order No.
H1
H2
07.70 01 01
73
55
07.70 02 01
73
55
07.70 01 02
119
101
07.70 02 02
119
101
07.70 01 03
165
147
07.70 02 03
165
147
07.70 01 04
211,5
193,5
07.70 02 04
211,5
193,5
07.70 01 99
SH+18
SH
07.70 02 99
SH +18 SH
Accessories
19“ insert set
Order No. 07.70 00 83
Front plate / rear wall
Wavetronic 1
07.70 00 91
Wavetronic 2
07.70 00 92
Wavetronic 3
07.70 00 93
Wavetronic 4
07.70 00 94
Wavetronic special height
07.70 00 99
67
Wavetronic
Accessories
Spring nuts for mounting groove
M4 (4 pieces)
29.00 00 50
M5 (8 pieces)
10.03 60 01
Applications
68
Mounting feet
Handle
Order No. 07.70 00 81
Order No. 07.70 00 82
General technical informations
The way to the right enclosure
Various criteria must be taken into account when selecting an enclosure:
- the fitting location (internal or external use, explosion zone, sea-water use etc.)
- the size (depends on the contents)
- the protective functions (ingress protection, EMC toughness, Ex)
The listings below should help you to select the right enclosure to match your special
requirements.
I. Enclosure material specifications
Aluminium enclosures
- Light, robust metal enclosures
- good chemical resistance (see table)
- can be used in large temperature range
- EMC basic screening (complete screening optional)
- good finishing options
- application areas: suitable for internal and external use, special version
or Ex version for use in aggressive or sea-water environments
II. Temperature range
The definition of temperature resistance for enclosures is based on the maximum continuous
temperature at which the enclosure remains dimensionally stable and the ingress protection
remains guaranteed. Admissible short term peak temperatures are often considerably higher.
The definition of temperature resistance in the case of the components of the process
automation is based to the maximum continuous temperature, provided that the factoryinstalled (electronic) components are functioning correctly and the enclosure rating is
maintained.
Further classifications apply to storage and transport, and are listed in the respective product
descriptions.
III. Corrosion resistance
We offer thefollowing for critical external areas:
SWB version (seawater-resistant):
Purifed - powder-coated
Standard colour RAL 5009, other colours on request.
For aplication areas with extreme UV radiation we recommend coating with a special Polyester
powder.
SBG/SBGL version only for wet painting processes.
SBG = washed - chromated - priming
SBGL = washed - chromated - priming - painting
Stainless steel socket inserts available on request.
IV. Ingress protection
ROSE enclosures are classified in ingress protection to the generally applicable guidelines
contained in EN 60529 and IEC 144.
The ingress protection is indicated by an abbreviation, which is always composed of the two
letters IP and two digits relating to the protection level.
Protection class for contact and foreign body protection
First digit
Designation
0
No protection
1
Protection against large foreign bodies
2
Protection against medium-sized foreign bodies
3
Protection against small foreign bodies
4
Protection against grain-shaped foreign bodies
5
Protection against dust deposits
6
Protection against dust entry
Protection class for water protection
Second digit
0
1
2
3
4
5
6
7
8
Note:
Designation
No protection
Protection against vertical falling drip water
Protection against obliquely falling drip water
Protection against water spray
Protection against splashing water
Protection against water jets
Protection when flooded
Protection when immersed
Protection when submerged
The ingress protection indicated for the enclosures is based on non-processed enclosures
as supplied. Aging and temperature fluctuations can lead to a diminution of the ingress
protection.
69
General technical informations
V. Chemical resistance
Chemical
Aluminium
Polycarbonate
Silicon
Acetone
+
-
•
Formic acid
•
30 %
•
Ammonia
+
-
+
Benzine
+
+
+
Benzole
+
-
-
Drilling/Parting oil
+
/
+
Butane
+
+
+
Calcium chloride
+
+
-
Chloric benzole
+
-
-
Crude oil, natural gas
+
+
•
Acetic acid
+
10 %
-
Formaldehyde
+
/
+
Frigen 113
+
+
/
Glycerine
+
•
+
Heating oil
+
•
•
Potassium chloride
•
+
+
Linseed oil
+
+
•
Methanol
+
-
+
Methylen chloride
+
-
-
Lactic acid
+
10 %
Sodium carbonate
•
+
Sodium chloride
•
+
+
Sodium hydroxide
+
/
•
Kerosene
+
/
/
Propane
+
/
/
Nitric acid
+
10 %
-
Lubricating oil
+
+
+
Carbon bisulphide
+
-
-
Carbon disuiphide
•
50 %
25 %
Sea water
+
+
+
Carbon tetrachloride
+
/
-
Tuluol
+
-
-
Trichlorethylene
+
/
-
Water steam
+
+
+
Xylol
+
-
-
Zinc sulphate
•
+
+
Citric acid
+
10 %
+
Explanation of symbols
+:
resistant against all concentrations
% : resistant against maximum % concentration
C°:
resistant to maximum C°
•:
limited resistance
-:
not resistant
/:
no information
70
/
General technical informations
EMC in enclosure technology
General information
In electrical/electronic engineering, enclosures assume two tasks:
-
protection of the installed components from mechanical hazards and adverse
radiation from outside
protection of the surroundings from occurring mechanical and electrical hazards
and adverse interference radiation from the components installed
Especially the electromagnetic compatibility (EMC) has an increasing effect on the
selection of enclosures because of the ongoing development of the electronic
components and the increased equipment density on the PCB’s - which increasingly
generates "pollution" by electromagnetic interference radiation in the environment.
Legal regulations
Within the framework of harmonising the European standards, an EC guideline
directive (05.89/336/EEC) was passed in May 1989, which took effect in the Federal
Republic of Germany on the 9th Nov. 1992 in the EMC law (EMVG).
This law is applicable to all units which might cause electromagnetic interference or
the operation of which could be impaired by such interference.
The EMC directive came into effect on 1.1.1996 EC-wide - from which date all new
electrical and electronic units brought into circulation within the EC had to fulfil
these regulations.
As an external sign that the EC relevant laws (EMC law and further design basics),
these units have to show the CE symbol.
Requirements from the enclosure
Enclosures as such are not subjected to the EMC law, as by definition they are not
electrical or electronic units.
However, enclosures are to a large extent responsible for the intensity of interference
emission (receipt and transmission of interference waves) of a unit.
At this point, the choice of the enclosure material is also decisive for the screening
effect which is composed of a reflection and an absorption damping of a enclosure.
Synthetic materials (plastics) alone have no filtering effect on interference radiation.
A screening effect can be achieved by additional costly treatment (metal flashing or
application of a conductive lacquer).
Metal enclosures , on the other hand, offer a highly effective basic protection against
interference radiation. (Here an important factor is a large contact surface of the
individual components of the enclosure (cover, enclosure shells).
To meet special protection requirements, the EMC compatibility can be increased by
- conductive seals,
- contact bare front surfaces as well as
- EMC compatible cable screw connections.
71
???
812030 DC 08/08
ROSE Systemtechnik GmbH
Postfach 1362
32439 Porta Westfalica
Erbeweg 13-15
32457 Porta Westfalica
72
Fon
Fax
E-Mail
Web
+49 571 50 41 0
+49 571 50 41 6
[email protected]
www.rose-pw.de