BT169 series Thyristors logic level Rev. 04 — 23 August 2004 Product data sheet 1. Product profile 1.1 General description Passivated, sensitive gate thyristors in a SOT54 plastic package. 1.2 Features ■ Designed to be interfaced directly to microcontrollers, logic integrated circuits and other low power gate trigger circuits. 1.3 Applications ■ General purpose switching and phase control applications. 1.4 Quick reference data ■ VDRM, VRRM ≤ 200 V (BT169B) ■ VDRM, VRRM ≤ 400 V (BT169D) ■ VDRM, VRRM ≤ 600 V (BT169G) ■ IT(RMS) ≤ 0.8 A ■ IT(AV) ≤ 0.5 A ■ ITSM ≤ 8 A. 2. Pinning information Table 1: Discrete pinning Pin Description 1 anode (a) 2 gate (g) 3 cathode (k) Simplified outline Symbol sym037 321 SOT54 (TO-92) BT169 series Philips Semiconductors Thyristors logic level 3. Ordering information Table 2: Ordering information Type number Package BT169B Name Description Version - plastic single-ended leaded (through hole) package; 3 leads SOT54 BT169D BT169G 4. Limiting values Table 3: Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter VDRM, VRRM repetitive peak off-state voltages Conditions Min Max Unit BT169B [1] - 200 V BT169D [1] - 400 V BT169G [1] - 600 V IT(AV) average on-state current half sine wave; Tlead ≤ 83 °C; see Figure 1 - 0.5 A IT(RMS) RMS on-state current all conduction angles; see Figure 4 and 5 - 0.8 A ITSM non-repetitive peak on-state current half sine wave; Tj = 25 °C prior to surge; see Figure 2 and 3 t = 10 ms - 8 A t = 8.3 ms - 9 A t = 10 ms - 0.32 A2s ITM = 2 A; IG = 10 mA; dIG/dt = 100 mA/µs - 50 A/µs I2t I2t dIT/dt repetitive rate of rise of on-state current after triggering IGM peak gate current - 1 A VGM peak gate voltage - 5 V VRGM peak reverse gate voltage - 5 V PGM peak gate power - 2 W PG(AV) average gate power - 0.1 W Tstg storage temperature −40 +150 °C Tj junction temperature - 125 °C [1] for fusing over any 20 ms period Although not recommended, off-state voltages up to 800 V may be applied without damage, but the thyristor may switch to the on-state. The rate of rise of current should not exceed 15 A/µs. 9397 750 13512 Product data sheet © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 04 — 23 August 2004 2 of 12 BT169 series Philips Semiconductors Thyristors logic level 001aab446 0.8 a= 1.57 Ptot (W) 77 Tc(max) (°C) 1.9 0.6 89 2.2 2.8 0.4 101 4 conduction angle (degrees) form factor a 30 60 90 120 180 4 2.8 2.2 1.9 1.57 0.2 113 α 125 0.6 0 0 0.1 0.2 0.3 0.4 0.5 IT(AV) (A) a = form factor = IT(RMS)/IT(AV). Fig 1. Total power dissipation as a function of average on-state current; maximum values. 001aab499 10 ITSM (A) IT ITSM 8 t tp Tj initial = 25 °C max 6 4 2 0 1 102 10 103 n f = 50 Hz. Fig 2. Non-repetitive peak on-state current as a function of the number of sinusoidal current cycles; maximum values. 9397 750 13512 Product data sheet © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 04 — 23 August 2004 3 of 12 BT169 series Philips Semiconductors Thyristors logic level 001aab497 103 IT ITSM (A) 102 ITSM t tp Tj initial = 25 °C max 10 1 10−5 10−4 10−3 10−2 tp (s) tp ≤ 10 ms. Fig 3. Non-repetitive peak on-state current as a function of pulse width for sinusoidal currents; maximum values. 001aab449 2 001aab450 1 IT(RMS) (A) 0.8 IT(RMS) (A) (1) 1.5 0.6 1 0.4 0.5 0.2 0 10−2 10−1 1 10 surge duration (s) f = 50 Hz; Tlead ≤ 83 °C. 0 −50 50 100 150 Tlead (°C) (1) Tlead = 83 °C. Fig 4. RMS on-state current as a function of surge duration for sinusoidal currents. Fig 5. RMS on-state current as a function of lead temperature; maximum values. 9397 750 13512 Product data sheet 0 © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 04 — 23 August 2004 4 of 12 BT169 series Philips Semiconductors Thyristors logic level 5. Thermal characteristics Table 4: Thermal characteristics Symbol Parameter Rth(j-lead) Rth(j-a) Conditions Min Typ Max Unit thermal resistance from junction to lead - - 60 K/W thermal resistance from junction to printed-circuit board ambient mounted; lead length = 4 mm - 150 - K/W 001aab451 102 Zth(j-lead) (K/W) 10 1 δ= P tp T 10−1 t tp T 10−2 10−5 10−4 10−3 10−2 10−1 1 10 tp (s) Fig 6. Transient thermal impedance as a function of pulse width. 9397 750 13512 Product data sheet © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 04 — 23 August 2004 5 of 12 BT169 series Philips Semiconductors Thyristors logic level 6. Characteristics Table 5: Characteristics Tj = 25 °C unless otherwise stated. Symbol Parameter Conditions Min Typ Max Unit Static characteristics IGT gate trigger current VD = 12 V; IT = 10 mA; gate open circuit; see Figure 8 - 50 200 µA IL latching current VD = 12 V; IGT = 0.5 mA; RGK = 1 kΩ; see Figure 10 - 2 6 mA IH holding current VD = 12 V; IGT = 0.5 mA; RGK = 1 kΩ; see Figure 11 - 2 5 mA VT on-state voltage IT = 1.2 A - 1.25 1.7 V VGT gate trigger voltage IT = 10 mA; gate open circuit; see Figure 7 VD = 12 V - 0.5 0.8 V VD = VDRM(max); Tj = 125 °C 0.2 0.3 - V - 0.05 0.1 mA RGK = 1 kΩ 500 800 - V/µs gate open circuit - 25 - V/µs ID, IR off-state leakage current VD = VDRM(max); VR = VRRM(max); Tj = 125 °C; RGK = 1 kΩ Dynamic characteristics dVD/dt critical rate of rise of off-state voltage VDM = 67 % VDRM(max); Tj = 125 °C; exponential waveform; see Figure 12 tgt gate controlled turn-on time ITM = 2 A; VD = VDRM(max); IG = 10 mA; dIG/dt = 0.1 A/µs - 2 - µs tq circuit commuted turn-off time VD = 67 % VDRM(max); Tj = 125 °C; ITM = 1.6 A; VR = 35 V; dITM/dt = 30 A/µs; dVD/dt = 2 V/µs; RGK = 1 kΩ - 100 - µs 9397 750 13512 Product data sheet © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 04 — 23 August 2004 6 of 12 BT169 series Philips Semiconductors Thyristors logic level 001aab501 1.6 VGT(Tj) VGT(25 °C) IGT(Tj) IGT(25 °C) 1.2 2 0.8 1 0.4 −50 0 50 100 150 001aab502 3 0 −50 0 50 100 Tj (°C) Fig 7. Normalized gate trigger voltage as a function of junction temperature. 001aab454 5 150 Tj (°C) IT (A) Fig 8. Normalized gate trigger current as a function junction temperature. 001aab503 3 IL(Tj) IL(25 °C) 4 2 3 2 1 1 (1) 0 0.4 (2) (3) 1.2 2 2.8 0 −50 VO = 1.067 V. 0 50 100 150 Tj (°C) VT (V) RGK = 1 kΩ. RS = 0.187 Ω. (1) Tj = 125 °C; typical values. (2) Tj = 125 °C; maximum values. (3) Tj = 25 °C; maximum values. Fig 9. On-state current characteristics. Fig 10. Normalized latching current as a function of junction temperature. 9397 750 13512 Product data sheet © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 04 — 23 August 2004 7 of 12 BT169 series Philips Semiconductors Thyristors logic level 001aab504 3 001aab507 104 IH(Tj) IH(25 °C) dVD/dt (V/µs) 2 103 1 102 (1) (2) 0 −50 10 0 50 100 150 0 50 Tj (°C) 100 150 Tj (°C) RGK = 1 kΩ. (1) RGK = 1 kΩ. (2) Gate open circuit. Fig 11. Normalized holding current as a function of junction temperature. Fig 12. Critical rate of rise of off-state voltage as a function of junction temperature; typical values. 7. Package information Epoxy meets requirements of UL94 V-0 at 1⁄8 inch. 9397 750 13512 Product data sheet © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 04 — 23 August 2004 8 of 12 BT169 series Philips Semiconductors Thyristors logic level 8. Package outline Plastic single-ended leaded (through hole) package; 3 leads SOT54 c E d A L b 1 e1 2 D e 3 b1 L1 0 2.5 5 mm scale DIMENSIONS (mm are the original dimensions) UNIT A b b1 c D d E mm 5.2 5.0 0.48 0.40 0.66 0.55 0.45 0.38 4.8 4.4 1.7 1.4 4.2 3.6 e 2.54 e1 L L1(1) 1.27 14.5 12.7 2.5 max. Note 1. Terminal dimensions within this zone are uncontrolled to allow for flow of plastic and terminal irregularities. OUTLINE VERSION SOT54 REFERENCES IEC JEDEC JEITA TO-92 SC-43A EUROPEAN PROJECTION ISSUE DATE 97-02-28 04-06-28 Fig 13. Package outline. 9397 750 13512 Product data sheet © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 04 — 23 August 2004 9 of 12 BT169 series Philips Semiconductors Thyristors logic level 9. Revision history Table 6: Revision history Document ID Release date Data sheet status Change notice Order number Supersedes BT169_SERIES_4 20040823 Product data sheet - 9397 750 13512 BT169_SERIES_3 Modifications: • The format of this data sheet has been redesigned to comply with the new presentation and information standard of Philips Semiconductors. • • • Section 1.4 “Quick reference data”: BT169E obsolete, removed from list. Table 2 “Ordering information”: BT169E obsolete, removed from table. Table 3 “Limiting values”: BT169E obsolete, removed from table. BT169_SERIES_3 20010902 Product specification - not applicable BT169_SERIES_2 BT169_SERIES_2 20010901 Product specification - not applicable BT169_SERIES_1 BT169_SERIES_1 19970901 Product specification - not applicable - 9397 750 13512 Product data sheet © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 04 — 23 August 2004 10 of 12 BT169 series Philips Semiconductors Thyristors logic level 10. Data sheet status Level Data sheet status [1] Product status [2] [3] Definition I Objective data Development This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. II Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. III Product data Production This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). [1] Please consult the most recently issued data sheet before initiating or completing a design. [2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. [3] For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. 11. Definitions 12. Disclaimers Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Life support — These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Right to make changes — Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status ‘Production’), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. 13. Contact information For additional information, please visit: http://www.semiconductors.philips.com For sales office addresses, send an email to: [email protected] 9397 750 13512 Product data sheet © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Rev. 04 — 23 August 2004 11 of 12 BT169 series Philips Semiconductors Thyristors logic level 14. Contents 1 1.1 1.2 1.3 1.4 2 3 4 5 6 7 8 9 10 11 12 13 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1 General description. . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Quick reference data. . . . . . . . . . . . . . . . . . . . . 1 Pinning information . . . . . . . . . . . . . . . . . . . . . . 1 Ordering information . . . . . . . . . . . . . . . . . . . . . 2 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2 Thermal characteristics. . . . . . . . . . . . . . . . . . . 5 Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Package information . . . . . . . . . . . . . . . . . . . . . 8 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 9 Revision history . . . . . . . . . . . . . . . . . . . . . . . . 10 Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 11 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Contact information . . . . . . . . . . . . . . . . . . . . 11 © Koninklijke Philips Electronics N.V. 2004 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Date of release: 23 August 2004 Document order number: 9397 750 13512 Published in The Netherlands