Product Overview NCS2561: Video Amplifier, 1-Channel, with Reconstruction Filter and SAG Correction For complete documentation, see the data sheet Product Description The NCS2561 is a single high speed video driver including a 2-pole reconstruction filter and SAG-correction capability. The NCS2561 is available in a space-saving SC-88 package optimized for low voltage, portable applications. It is designed to be compatible with the Digital-to-Analog (DAC) embedded in most video processors. The NCS2561 internally integrates an 8-MHz 2pole video DAC reconstruction filter with a fixed gain of 2. The NCS2561 also has a built in SAG-correction circuit when used at the output in an AC-coupled mode. To further reduce power consumption, an enable pin is provided. Features Benefits • Internal 8 MHz 2-Pole Reconstruction Filter • • • • Internal Fixed Gain: 6 dB Intergrated Level Shifter Very Low Shutdown Current (< 5uA, 1.5uA Typical) Capability to drive 2 video loads • • • • ESD HBM Protection > 4 kV at the output Supply voltage Range: 2.7 V to 3.3 V Sag Correction Circuit Low Quiscent Current 6 mA typical • Reject DAC oversampling frequency (27 MHz)- Compatible with PAL, NTSC, SD frequency bandwidths. • Allows providing video signal amplitude requirements • Facilitate Output DC-Coupling to the video load • Save Power • Able to deal with 2 CVBS signals for ex. to drive 1 display + 1 VCR • High ESD HBM Protection Requested on the video output • Low Voltage Power Supply Applications • Reduces the output coupling capacitor size • Save Power Applications End Products • Video Systems • NTSC, PAL, SECAM Applications • Digital Still Camera • Smart Phone • Set Top Box Part Electrical Specifications Product Compliance Status Channels GBW Typ (MHz) VCC Max (V) ID Typ (mA) TA Min (°C) TA Max (°C) Package Type NCS2561SQT1G Pb-free Active 1 8 3.3 6 -40 125 SC-88-6 / SC70-6 / SOT363-6 Halide free For more information please contact your local sales support at www.onsemi.com Created on: 6/30/2016