LTM9001 81LD 11.25mm X 11.25mm X 2.32mm (TABLE OF MATERIAL DECLARATION) The LTM9001 is RoHS compliant per EU RoHS Directive 2003/95/EC. No. 1 2 3 4 5 6 7 Note: It contains less than 100ppm cadmium (Cd) and less than 1,000ppm of each - lead (Pb), mercury (Hg), hexavalent chromium (Cr+), polybrominated biphenyl (PBB) and polybrominated diphenyl ether (PBDE) Component Weight Material Mass Materials Analysis Part Name Material Name Materials Analysis (element) CAS Number (gram) (gram) (weight %) Barium Compounds 7727-43-7 0.0024 1.5000 Substrate Circuit Board 0.1624 Filler Substances (Silica 0.0648 39.9146 Crystalline) Copper Metal 7440-50-8 0.0909 56.0000 Copper Compounds 1328-53-6 0.0000 0.0180 Ecotoxic substances 7439-92-1 0.0000 0.0004 Gold metal or alloy 7440-57-5 0.0007 0.4600 Nickel 7440-02-0 0.0034 2.1000 Zinc 7440-66-6 0.0000 0.0070 Alloy 0.0077 Sn 7440-31-5 0.0073 95.0000 Solder Paste Sb 7440-36-0 0.0004 5.0000 Passive/Active 0.0301 Capacitor 0.0269 89.2134 Components Resistor 0.0013 4.3246 Inductor 0.0019 6.4520 Diode 0.0000 0.0000 Active Ics Silicon 0.0067 Silicon 7440-21-3 0.0067 100.0000 Wire Gold 0.0013 Au 7440-57-5 0.0013 99.9900 see LTC web site for 0.0205 0.0205 LTC6400IUD 100.0000 material declaration Encapsulation Epoxy Resin 0.4749 Fused Silica 60676-86-0 0.3666 77.2000 Epoxy Resin 0.0423 8.9000 Phenol Resin 0.0423 8.9000 Crytalline Silica 14808-60-7 0.0142 3.0000 Carbon Black 1333-86-4 0.0024 0.5000 Metal Hydroxide 0.0071 1.5000 Total Package Weight 0.7037 Composition derived from MSDS and material C of C from Vendors Component Weight based on assembly of generic parts